Thermo Electron Corporation CR 4i Refrigerated Centrifuge

Maximum RCF with fixed angle rotor: 20913 x g Maximum RCF with swing-bucket rotor: 4500 x g Maximum  (more)RCF with plate rotor: 3486 x g Speed range: 200 – 14000 rpm Temperature range: -9 °C to 40 °C Maximum capacity: 4x 750 mL/4x MTP Acceleration/braking ramps: 10/10 Timer: 1 min to 99 min, continuous, short-spin Dimensions (WxDxH): 700 x 608 x 345 mm Weight: 99 kg Equipped with: 1x Eppendorf A-4-81 swing-out rotor (max 4000 rpm) 4x Eppendorf bucket 4x Eppendorf bucket aerosol-tight lid 4x Eppendorf MTP carrier 4x Eppendorf insert (10x 15 mL falcon tube capacity) 4x Eppendorf insert (5x 50 mL falcon tube capacity)

Thermo Scientific Heraeus Multifuge X3R Centrifuge This was removed from a university lab where it w (more)as surplus to requirements. The unit powers up and is in good working order. It has a cycle count of 417. It is in excellent cosmetic condition. Rotor - Thermo Scientific 75003607 - Max 4700 RPMBuckets - 4 x Thermo Scientific 75003607 Adaptors:2 x Green Sorvall Heraeus 75003638- fits 5 x 50ml tubes2 x Brown Sorvall Heraeus 5003639- fits 12 x 15ml tubes 5003639 Includes Instruction manual The centrifuge was set to -10ºc successfully. It was then set to 4ºc successfully and finally set to 37ºc Cycle count - 417 Serial number- 41006326Model number- X3R

Hermle Z206-A Centrifuge Max Capacity 6 x 50 ml Max. RPM/RCF 6,000 | 4,427 x g Running Time 59 min  (more)50s / 10s increments Five Year Warranty Five Year Warranty Five Year Warranty Five Year Warranty -->Features - Microprocessor control - Active imbalance detection and cut-off - One-hand closing - Emergency lid lock - Air cooling - autoclavable rotors - Diagnostic program - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion The Z206-A Compact Centrifuge is suitable for a variety of applications inside both the clinical and research setting. Three angle rotor options are available permitting use with all common tube sizes from 0.2ml to 50ml. A unique 6 x 5ml swing out rotor is also available for clinical applications requiring horizontal separation within 5ml blood collection tubes. The advanced microprocessor controls feature an ergonomic turn knob that controls all settings (time, speed, accel/decel levels, etc.). The speed can be adjusted from 200 rpm up to a maximum speed of 6,000 rpm (corresponding to 4,427 xg) in the popular 50ml and 15ml rotors. The centrifuge lid features and automatic lid-lock that prevents it from being opened while the rotor is still in motion. In addition, a unique imbalance detection system is designed to automatically power down the motor in the event of improper loading of the rotor or any tube breakage. Compact, quiet, and versatile are just a few of the features found in the Z206-A centrifuge. Add to this, the proven safety features, and the result is the ideal centrifuge for a variety of clinical and molecular biology applications. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z206-A Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Compact Hematocrit Centrifuge Due to its compact design the Z207-H Hematocrit Centrifuge is t (more)he perfect centrifuge for even the smallest of lab spaces. It is equipped with a hematocrit rotor for 24 x capillaries. Accompanied by Hermle’s easy to use control panel , the unique EZ-Scroll™ touch pad, gives you ease of control and a modern feel. An advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf in increments of 10. In addition to retrieving saved programs, the easy to use front panel can be used to adjust accel/decel rates, run time, and change the end of run alarm tone. There is also a momentary spin function that will run while the button is pressed. Additionally the Z207-H features a sleep mode to save energy by shutting off after a certain time if not being used while on, which can be toggled on or off easily. INCLUDED: The Hermle Compact Hematocrit Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Eppendorf 5425 Centrifuge w/ FA-24x2 Fixed Angle Rotor The Eppendorf 5425 Centrifuge w/ FA-24x2 Fixe (more)d Angle Rotor is a whisper quiet microcentrifuge offering an outstanding set of features for a broad range of molecular and cell biology applications. Short runs up to 12 minutes are whisper quiet at an average noise level of 45 dB(A) and maximum RCF of up to 21,300 x g. This is sufficient for centrifugation steps of most routinely used DNA/RNA purification kits. The 5425 also features a wide speed range, with a minimum speed of 100 RPM and a maximum speed of 15,060 RPM. With a comprehensive range of 6 rotors as well, this broadens the spectrum of applications of the 5425. The included FA-24x2 Fixed Angle Rotor reaches a maximum speed of 15,060 RPM. Click Here to View Product Video INCLUDED: The Eppendorf 5425 Centrifuge w/ FA-24x2 Fixed Angle Rotor includes: - FA-24x2 Fixed Angle Rotor with Aerosol Lid - Rotor Wrench - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Eppendorf 5425 Centrifuge w/ FA-24x2 Fixed Angle Rotor SpecificationsMaximum Speed15,060 RPMMaximum RCF21,300 x gMaximum Capacity24 x 1.5/2.0 ml 10 x 5.0 mlTemperature RangeN/ATimer10 seconds to 9:59 hours, with continuous runAcceleration Time15 secondsDeceleration Time15 secondsDimensions (W x D x H)9.45 x 15.35 x 9.45 in. (24 x 39 x 24 cm)Weight34.39 lb. (15.6 kg)Electrical Requirements120V, 50/60Hz, 3.8A, 280WRefrigerationNo Refrigeration

Manufacturer: Beckman Coulter Model: L-100XP Ultracentrifuge Description: Whether your research invo (more)lves proteomics, cytomics or genomics, the Optima L-XP Series Ultracentrifuge plays a key role in the research process. The Beckman Coulter Optima L-100XP Preparative Ultracentrifuge features an on-board computer, powerful Optima eXPert software and an easy-to-use touchscreen. The Beckman Optima L-100XP and beyond Optima L-XP series offer superior functionality, optimized user efficiency and faster turnaround times than any other ultracentrifuge. Core features: - Up to 100,000 revolutions per minute - to push the boundaries of research. - 10 Acceleration profiles-9 slow rates or maximum acceleration from 0 to the set rate - 11 deceleration profiles-9 slow rates, coast to a stop without braking, or dynamic full braking   from the set speed - Low noise system <53 dBa Technical data: Maximum speed: 100,000 rpm Maximum heat output to the room under steady state conditions: 1.0kW/hr (3400 BTU/hr) Noise level 1 meter in front of the centrifuge: <53 dBa Ambient temperature range: 10 to 40°C ambient temperature Dimensions H x W x D: 125.7 x 94 x 67.3 cm Weight: 465 kg Scope of delivery: - L-100XP ultracentrifuge without rotor - Instruction manual as PDF via e-mail If you need a suitable rotor, we can help you! The device is in absolute top condition and has been 100% tested for function.

2 x Varian VacSorb Pumps Model - 941-6501 w/ Accessories These items were removed from a university  (more)where they were surplus to requirement. The condition for each item is stated below. This listing consists of the following: 1 x Varian VacSorb PumpModel: 941-6501-Brand new and sealed. 1 x Varian VacSorb PumpModel: 941-6501-Used in good cosmetic condition.This pump powers up and emits heat, we are unable to test it further at our facility. 3 x Tins of Molecular Sieve Charge (944-0000)

GE AKTA Purifier 10, FPLC&nbsp;System This was removed from a university lab where it was surplus to (more) requirements. The system has been professionally serviced and is in good working order. This system includes: GE AKTA Purifier consisting of components: P-900, UV-900, pH/C-900, Box-900, IV-908, PV-908, INV-907 and M-925Model number: 28406262 Serial Number: 1533920 GE A900 AKTA Autosampler A900Model number: 56-3122-32&nbsp;Serial Number: 110012 Amersham Pharmacia Biotech FRAC-950Model number: 18-6083-00&nbsp;Serial Number: 56608320 M7 001223 AKTA FPLC consisting of components: INV-907, AD-900 and X2 PV-908 GE CU-950 Control unitModel number: 28931475AG&nbsp;Serial Number: 7183 Hiload 26/60 Superdex 75 pg HP Compaq 8000 Elite CMT Business PCModel number: AU245AV Serial Number: CZC1040XZG HP Compaq LA1951G monitor Phemomenex DEGASSEX DG-4400 degasserModel number: DG-4400&nbsp;Serial Number: 043B0487 Various cables and leads All relevant user guides and user manuals UNICORN 5.0/5.1 Software and all relevant manuals

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R &ndash; resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR &ndash; infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C &ndash; capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Benchmark Pulse 150 Ultrasonic Homogenizer with 6mm Horn and Soundproof Box The Pulse 150 Ultrasonic (more) Homogenizer uses cavitation and ultrasonic waves to break cells in suspension, shear DNA and prepare samples for ChIP assays. With up to 150 watts of power, the unit processes samples from 0.1 ml to 150 ml (with the appropriate horn). All components needed for homogenization are included with the Pulse 150 – a controller, transducer, temperature probe, 6 mm diameter titanium alloy horn and wrenches to change horns. A soundproof box with sample platform is also supplied as standard. The box reduces the noise generated by the sonicator. The 6mm horn is appropriate for volumes from 10ml to 100ml. Optional horns are available for other volumes. Operating parameters are set and viewed on the 4.3 inch color touch screen. Pulsed operation is easily programmed as is the power level. Twenty programs can be stored in memory and recalled as needed. Alarms alert the user to over temperature, over/no load and expiration of time. INCLUDED: The Benchmark Pulse 150 Ultrasonic Homogenizer with 6mm Horn and Soundproof Box includes: - Controller - Transducer - 6mm Horn - Soundproof Enclosure - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty