Thermo 3120-1000 3x Pack of 4 Centrifuge Bottle 1000ml 1L PPCO Nalgene

Sigma 3-16KL Centrifuge This item was removed from a university laboratory where it was surplus to r (more)equirements. The centrifuge is in very good used cosmetic condition, showing signs of general use. The rubber boot around the motor shaft is perished and torn due to age and wear but can be easily replaced and does not affect the unit's operation. Functionality: - Powers up and runs as intended. - Tested at -10ºC and 37ºC, with temperatures reached as expected. Included Accessories: - Rotor - Sigma 11180 4700rpm Rotor with Sigma 13190 Buckets - Bucket Adapters: - 4 x Sigma 17355 - 4 x Sigma 17356 - 8 x Sigma 17358 - 4 x Sigma 17359 - 4 x Sigma 17362 - 4 x Sigma 17377 - 3 x Sigma 17190 lids for the buckets Also Included: - Instruction manual

This listing is for 1 of 3 Eppendorf MiniSpin Plus Centrifuge.The unit is in full working condition  (more)and is ready for immediate release.The Eppendorf MiniSpin Plus Centrifuge is a powerful, user-friendly personal microcentrifuge designed for efficient molecular biology separations and quick spins. Its compact design allows each workstation to be equipped with its own centrifuge, enhancing workflow and convenience in the lab.Features:Compact Design: Exceptionally small footprint for efficient benchtop use.High Capacity: Accommodates up to 12 x 1.5/2.0 mL tubes.Powerful Performance: Spins up to 14,000 x g with a fixed-angle rotor.Rapid Acceleration and Deceleration: Achieves maximum speed in less than 13 seconds.User-Friendly Display: Clear digital display for time and speed.Quiet Operation: Remarkably quiet, suitable for sensitive lab environments.Durable Construction: Metal rotor housing for enhanced durability.Safety Compliance: Conforms to IEC 1010-2-020 safety regulations.Convenient Operation: Separate "Short Spin" button for quick sample processing.Temperature Control: Excellent airflow minimizes heating, protecting temperature-sensitive samples.Automatic Lid Opening: Lid opens automatically at the end of the run to reduce handling time.Maintenance-Free Drive: No routine maintenance required.Autoclavable Rotor: Rotor can be sterilized at 121 °C for 20 minutes.Chemical Resistance: Inner centrifuge lid designed to resist chemicals.Specifications:Capacity: 12 x 1.5/2.0 mL tubes (adapters available for smaller tubes)Maximum RCF:MiniSpin Plus: 14,000 x gSpeed Range: 800 to 14,000 rpm (adjustable in 100 rpm increments)Acceleration Time to Max Speed: 13 secondsDeceleration Time from Max Speed: 12 secondsTimer Range:MiniSpin Plus: 15 seconds to 99 minutes, with continuous modeDimensions (HxWxD): 4.7 in. (11.9 cm) x 8.9 in. (22.6 cm) x 9.4 in. (23.9 cm)Weight: 9.5 lb (4.3 kg)

SCILOGEX EZee Mini-Centrifuge, Green Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 StripsEZee mini cen (more)trifuges are ideal for microfiltration and quick spin downs from the walls and caps of microcentrifuge tubes. The compact design takes up less than six inches of bench space. Easy open clear colored lids are available in four colors. Simply close the lid for acceleration and open the lid for deceleration, or alternatively use the on/off switch.Product Features - Available in two colors i.e., green, blue - Easy-to-use with dual start/stop function. - Maximum speed 7000rpm/2680xg - Supplied with an 8 place 1.5/2.0ml microtube rotor and 16 x PCR tube rotor & 0.2/0.5ml tube adapters. - Compact design - Whisper quiet operation, noise level ≤ 45dB - Ideal for quick spin downs of microtubes and PCR tubes - Simply close the lid for acceleration and open the lid for deceleration or use the on/off switch. - Accelerates and brakes in seconds. - Universal voltage - Rotors change without tools. Click Here to View Product Video INCLUDED: The SCILOGEX EZee Mini-Centrifuge, Green Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 Strips includes: - Power Cord - Two Year Manufacturer's Warranty

Lid for Eppendorf FA-45-24-11 centrifuge rotor New material in original packaging For centrifuge 542 (more)7 R Date of manufacture: 09-2014

This Peak Scientific PH600-UK Hydrogen Generator was removed from a university lab where it was surp (more)lus to requirements Item is in good cosmetic condition with minor marks but is missing side panel screws. No testing was carried out as it appears to be missing parts. This item is listed as spares/repairs as no tests have been performed.

Arctiko LF 650 -25 C / -10 C Upright Biomedical Freezer Refrigerant R290 Temperature Range -25 / -1 (more)0 °C (-77 / -50 °F) Capacity 24.72 Cu.Ft. (700 Liters) Features - Superior performance and temperature stability - High-quality Carel digital controller - Data logger with Bluetooth and NFC interface - High / Low temperature warning alarm - Open door alarm - Power failure alarm (visual and acoustic) - LED inside light (refrigerators models) - Forced air ventilation - Port hole - UL61010 certification - Energy Star rating - 115V/60Hz power - Sizes available from 14.12 cu.ft. up to 49.44 cu.ft. The Arctiko LF 650 upright freezer offers the superior features required for biomedical applications. This model includes a high-quality Carel controller with Bluetooth connection as well as high/low temperature alarms and a built-in data logger.INCLUDED: The Arctiko LF 650 -25 C / -10 C Upright Biomedical Freezer includes: - Key for Door Lock - Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Manufacturer: Waters XSelect Model: XSelect HSS PFP XP Column, 100Å, 2.5 µm, , 3 mm X 100 mm P/N: 18 (more)6006179 Description: The XSelect HSS PFP column is a low coverage, unendcapped pentafluorophenyl phase that provides exceptional separation of closely related compounds as well as alternate selectivity to traditional alkyl chain columns due to an intricate combination of retention mechanisms. Packed in ultra-low dispersion hardware, 2.5 µm eXtended Performance [XP] columns enable exceptional separation performance, robustness and throughput for HPLC assays while enabling a seamless transition path toward UPLC adoption. Specifications: % Carbon Load: 7.1 Bonding Technology: PFP Brand: XSelect Chemistry: PFP / Fluoro-Phenyl Endcapped: No Endfitting Type: Waters Format: XP Column ID: 3 mm Length (mm): 100 mm Mode: Reversed-Phase Particle Shape: Spherical Particle Size (dp): 2.5 µm Particle Substrate: Silica Pore Size: 100Å Silanol Activity: High Surface Area: 230 System: HPLC Technology: HSS USP Classification: L43  pH Range: 2 - 8 The column is in brand new condition, packed and sealed in box - never used.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Manufacturer: PFI Systems Model: Fumigation Boiler / Bath Key Facts: - Max Volume 250ml- 230V 50/60H (more)z Items delivered: - Fumigation Boiler The fumigation boiler is in good cosmetic condition and 100% functional tested.