Sorvall RC-5C+ Plus Floorstanding Centrifuge Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

Jouan Refrigerated Centrifuge  Model - CR412 with 4750RPM Rotor & Inserts Lab This item was (more) removed from a university where it was surplus to requirement. It is in good cosmetic condition and powers on, however, when powered on the display reads '0000' and no controls are operable, thus preventing any testing from being conducted. Therefore, this item is sold as Spares/Repair.

Beckman L8-60MR Ultracentrifuge This was removed from a university lab where it was surplus to requi (more)rements. The unit powers up and was tested with a Beckman 70.1 Ti rotor from another item (Not included), but would not reach over 3000rpm (Rotor max is 10000). We suspect there is a vacuum issue as the vacuum light flashed red during testing. The system also will not cool down. It is in otherwise good cosmetic condition. It is sold for spares/repairs. Beckman L8-60MR UltracentrifugeModel: L8-60MRSerial#: 6H816Year: 1988

Beckman Coulter Avanti J-25 Centrifuge This item was removed from a university laboratory where it w (more)as surplus to requirements. The centrifuge powers on and is in fair cosmetic condition. The condenser appears to be functional as the unit begins to cool, but a drive error is displayed on the centrifuge.Upon inspection, it was found that the motor had been disconnected, the front panel removed, and most wiring disconnected. This item is sold as-is for Spares/Repairs due to its current state. Specifications:- Serial No.: 270-728845-AA - Model No.: Avanti J-25

MARSHALL Select MS-CE12000 Hematocrit Centrifuge, 12,000 RPM Maximum Speed 12,000 RPM Maximum RCF 1 (more)4,170 × g Maximum Capacity Hematocrit Rotor: 24 x capillaries Features - Reaches up to 12,000 RPM for efficient hematocrit determinations - Streamlined and practical with an all-steel structure for durability and safety - Space-saving design suitable for various laboratory settings - Features an integral food-grade silicone ring to prevent aerosol overflow - Includes detection functions for door lock and motor status - Push-button programming with digital display for easy parameter settings The MARSHALL Select MS-CE12000 Hematocrit Centrifuge, a high-performance centrifuge engineered to meet the demanding requirements of immunohematology and research laboratories. Operating at a maximum speed of 12,000 RPM, this centrifuge specializes in the accurate determination of hematocrit (HCT) values by centrifuging anticoagulant-treated whole blood in disposable capillary glass tubes. After a brief 5-minute spin, the proportion of red cells is measured against the total volume of blood, allowing precise analysis of the blood's hematocrit level. The machine's ergonomic, streamlined design not only ensures practicality and safety with its all-steel structure but also enhances the aesthetic appeal of any laboratory setting. The MS-CE12000 is not just robust but also intelligently designed for ease of use and safety. It features a compact, space-saving footprint and is equipped with an integral food-grade silicone sealing ring to prevent aerosol overflow, safeguarding the operator. The centrifuge boasts electromechanical integration for its door lock, ensuring reliability and safety during operation. Additionally, its user-friendly interface includes push-button programming and a digital tube display for setting and monitoring centrifugal speed and time. With real-time detection systems for door lock and motor status, complemented by an alarm function for enhanced diagnostic safety, this centrifuge is an essential tool for modern laboratories focused on hematology and cytology. INCLUDED: The MARSHALL Select MS-CE12000 Hematocrit Centrifuge, 12,000 RPM includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

VWR Micro Star 30 centrifuge. Rotor with lid for 24 1.5/ 2 mL tubes. Maximum speed 18,000 rpm (17,00 (more)0 xg). It can accommodate a 6*50 mL RA 6/50 rotor (not included). 9-level acceleration/braking ramps. Ventilated. Timer from 1 to 99.5 min. Noise level <62 dB. Dimensions: 360*430*288mm; 23.5kg. User manual. The VWR Micro Star 30 centrifuge is high-quality laboratory equipment with a compact and silent design. It is ideal for molecular biology, biochemistry and genetics applications. It features an intuitive control panel and digital display for easy programming and monitoring of centrifugation parameters. In addition, its security system guarantees reliable and safe operation at all times.

Sorvall SS-34 centrifuge rotor. Capacity of 8 x 50mL. Max. speed 25,000rpm; max. RCF 50,228 x g. Ang (more)le 34°. Tube Diameter 29mm. Compatible with Sorvall RC-5, RC-5B, RC-5B Plus, RC-5C, RC-5C Plus, RC6c Plus, and RC-26 Plus centrifuges.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don&rsquo;t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what&rsquo;s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R &ndash; resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR &ndash; infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C &ndash; capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

IKA Roller 10 Digital Shaker Type of Movement Rolling Speed Range 5 to 80 RPM Number of Rolls 10 Rol (more)ls Features - Timer: Countdown, adjustable from 1 s to 99h 59min - Counter: Display of shaking time - Error Code Display - Usable at 4 to 50 °C in incubators - Suitable for continuous operation - Removable rolls enable shaking of larger tubes - Easy operation with keypad - Shaking diameter: 24,5 mm (height) - Speed range: 5 - 80 rpm The digital roller shaker with 10 rolls provides smooth rocking and rolling action at infinitely adjustable speeds. Used for mixing blood samples, solid and liquid suspensions, and viscous samples, the unit can be used with all conventional tubes and cylindrical bottles. Easily removable attachments provide for quick cleaning in case of sample spills. The shaker features a countdown timer adjustable from 1 second to 99 hours and 59 minutes, and a counter display for shaking time. It operates effectively at 4 to 50 °C in incubators and is suitable for continuous operation. Removable rolls enable the shaking of larger tubes, and easy operation is ensured with a keypad. The speed range is 5 - 80 rpm with a 7-segment LED display, adjustable in 1 RPM steps. The shaker has a rolling motion with a shaking diameter of 24.5 mm, dimensions of 380 x 115 x 545 mm, and weighs 6 kg.