Scilogex SCI-1524R High Speed Refrigerated Micro-Centrifuge with 24 place rotor

This listing is for an Eppendorf 5415D Centrifuge The Centrifuge 5415 D is a non-refrigerated bench (more)-top centrifuge and is used in research and routine laboratories in the biosciences, industry, clinics and chemistry.With their space-saving design and user-friendly operating concept, these centrifuges are ideal for everyday routine tasks.The basic functions can be selected using the "SHORT" key and the "TIME" and "SPEED" dial. The values appear in the display in digital form.Power supply: 230 V / 50 – 60 Hz 120 V / 50 – 60 Hz see identification plate Power requirement: 180 W Max. rotational speed: 13,200 rpm Max. centrifugal force: 16,110 rcf Max. load: 24 x 2.0 ml Safe-Lock Micro Test Tubes or 36 x 0.5 ml tubes Max. kinetic energy: 3,100 Nm Max. density of material to be centrifuged: 1.2 g/ml Ambient temperature: 2 °C – 35 °C Max. relative humidity: 75 % Dimensions: Height:230 mm Depth: 310 mm Width: 230 mm Weight (without rotor): 8.5 kg Acceleration time (230 V): < 13 sec. Deceleration time: < 11 sec. Acceleration time (100 / 120 V): < 15 sec. Deceleration time: < 13 sec.

Mini laboratory centrifuge 846070 for GREINER Bio-One microplates New equipment in its original pack (more)aging Speed: 2,550 rpm (16,022.1 rad.min-1) Capacity: 2 Microplates

Max speed: 6000 rpm Max RCF: 2000 x g Max capacity: 6 x 1.5/2ml Dimensions: (WxHxD): 153 x 128 x 109 (more) mm Weight: 730g

Hermle Z216 M Centrifuge w/ COMBI-RotorFeatures - Brushless induction drive - Microprocessor control (more) - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge w/ COMBI-Rotor includes: - COMBI-Rotor with Quick-Seal lid for 24 x 1.5/2.0ml and 4 x PCR strips - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Benchmark LC-8 5000 Centrifuge Benchmark’s LC-8 series of laboratory centrifuges is uniquely designe (more)d to meet a wide range of applications in both the clinical and research laboratory. An eight position rotor is included and designed to directly accept 10ml and 15ml test-tubes (conical or round bottom), while optional adapters are also available for use with all popular sizes of blood collection and culture tubes. Unlike most compact centrifuges in this class, the rotor can be easily removed from the chamber for cleaning. The back-lit, liquid crystal display provides full control over the set run time and rotational speed. The rotational speed can be set/viewed in rpm or rcf and acceleration/deceleration levels can be easily adjusted in the advanced settings mode. To ensure safety, the digital microprocessor ensures that the lid has been closed and that the safety lid lock is engaged prior to starting a centrifugation cycle. In addition, an advanced imbalance detection system constantly monitors the balance and vibration, automatically bringing the rotor to a stop if an imbalance is detected. INCLUDED: The Benchmark LC-8 5000 Centrifuge includes: - 8 x 15ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

MORE DETAILS TO FOLLOW

This Edwards 8 E2M8 Two Stage Rotary Vane Vacuum Pump was removed from a university lab where it was (more) surplus to requirements. The unit has been professionally serviced and is in full working order. It performs to 3.5 x 10 - 3. It is in good cosmetic condition with minor marks.

Olympus IX70 Inverted Fluorescence Microscope This item was removed from a university lab where it w (more)as surplus to requirements. The microscope is in reasonably good cosmetic condition but some issues were found during servicing. • Fluorescence attachment &amp; mercury lamphouse present but no mercury power supply starter.• 2 filter cubes present – U-MWG2 &amp; U-MWB• Some evidence of corrosion due to salt or other liquid.• Coarse focus very stiff – clutch lever stuck fast.• Transmitted light power supply is good.• Eyepiece adjusters are stuck. Therefore, it is listed as Spares/Repair. Includes:- Olympus BX 100W HBO Mercury Microscope Lamp U-ULS100HG (no power supply included) - 2 x WH10X-H/22 eyepieces - Fluorescence attachment and mercury lamphouse (no mercury power supply starter) - 2 filter cubes: U-MWG2 and U-MWB Condition Notes:- Missing stage, objectives, and condenser - Some corrosion present, likely due to salt or liquid exposure - Coarse focus is very stiff, with a stuck clutch lever - Transmitted light power supply is functional - Eyepiece adjusters are stuck

Varian Turbo-V 250 Macro Torr Pump System This system was removed from a university where it was sur (more)plus to requirement. All elements are in good cosmetic condition and the blades move freely on the Varian Turbo-V 250 Macro Torr Pump. We are unable to test further at our facility. All items included in the system: 1 x Varian Turbo-V 250 Macro Torr Pump:Model no. 9699008S016 1 x Multigauge controllerPart no. V209600 1 x Varian Turbo-V250 C.U Pump controller:Model no. 9699425S004 1 x Multigauge RS232 Board instruction manualPart no. L6439309 1 x Turbo-V 250 Controllers Instruction manualModel 969-9423Model 969-9523Model 969-9425 1 x Turbo- V 250 Pumps Instructional manual969-9007 Series969-9008 Series All cables shown in the images are included.