Scilogex DM0636 Multi-Purpose Clinical Centrifuge w/ 19400041 Swing Out Rotor

This listing is for 1 of 5 Thermo Scientific Sorvall RC12BP+ Floor Centrifuge Sorvall RC 12BP Plus  (more)Centrifuge System specifications: Centrifuge Specifications Maximum speed: 4,700 rpm Maximum RCF: 7,340 xg Maximum capacity: 12 L, 6 x 2000 mL Nalgene Bio-bottles, 12-500 mL quad blood bags Drive: High-performance induction Imbalance detector: 50 gram tolerance Accel/decel profiles: 11 Run time: 1 min. - 99 min 59 sec., continuous operation Temperature control range: -10 to +40 °C Dimensions (H x W x D): 1178 x 800 x 905 mm (46.3 x 31.5 x 35.6 in) Weight 470 kg (1,036 lbs) Control: Microprocessor Programmability: 15 programs Functions: Centri-Log traceability software, ACE, Step-mode runs, slow start/stop Safety features:  Automatic lid lock, imbalance detection, armored guard ring, security key switch

This Beckman J2-21 Floor Standing Centrifuge was removed from a university lab where it was surplus  (more)to requirements. We have replaced the lid and repaired an area of cracked plastic underneath it. It is very stable. There are some cracks around the gas strut area. They do not appear to affect the operation of the unit. The unit is functional and has a comprehensive service history. The centrifuge holds a vacuum well and has been tested at: 5,000rpm10,000rpm15,000rpm20,000rpm (Max). It ran fine at all these speeds but the needle isn't totally in sync with the control knob. It has been tested at the following temperatures: 0ºC our thermometer read -15.8ºC20ºC our thermometer read 21.2ºC It appears to probably have a cooling issue. The compressor etc runs fine. It just appears to drop lower than it is set. When set to higher temps, it takes quite a while to heat up.

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm This was removed from a university lab where  (more)it was surplus to requirements. The unit powers up but half of the keypad no longer works. It is sold for spares/repairs.

MARSHALL Select MS-CE4000 Benchtop Centrifuge, 4,000 RPM Maximum Speed 4,000 RPM Maximum RCF 2,250  (more)x g Maximum Capacity 6 x 50ml Features - Steel body construction with a plastic-sprayed surface for durability and aesthetic appeal - Low noise operation at less than 65 dB(A) ensures a quiet laboratory environment - Features a low temperature rise during use, preserving sample integrity - Equipped with a maintenance-free DC brushless motor for reliable and smooth operation - Microprocessor control with door cover protection enhances safety - Alarm monitoring function for real-time tracking of lock and motor status - User-friendly interface facilitates intuitive setup and operation - Real-time display of centrifugal force and operational parameters - Push-button programming and digital tube display for easy operation and monitoring - Supports various fixed-angle rotors to accommodate different testing needs - Compact dimensions make this centrifuge ideal for benchtop use The MARSHALL Select MS-CE4000 Benchtop Centrifuge is designed for optimal performance and durability, achieving a maximum speed of 4,000 RPM and an RCF of 2,250 x g. Its capacity to handle up to 6 x 50 ml tubes makes it suitable for a range of laboratory applications, from biochemistry to pharmacy. The centrifuge features a robust steel body with a plastic-sprayed surface, combining strength with an aesthetically pleasing appearance. It operates quietly with a noise level below 65 dB(A) and maintains a low temperature rise during operation, ensuring sample integrity. Equipped with a maintenance-free DC brushless motor and microprocessor control, the MS-CE4000 ensures smooth and reliable operation. The unit's safety is enhanced with door cover protection and an alarm monitoring system that keeps track of the lock and motor status. Its user-friendly interface includes push-button programming, a digital tube display for real-time parameter monitoring, and the ability to set and view centrifugal speed and time. The centrifuge is versatile, supporting various fixed-angle rotors to meet different experimental needs. With its compact dimensions (17.7 x 14.6 x 11 inches), this centrifuge is an excellent choice for laboratories seeking a reliable, multi-functional device. INCLUDED: The MARSHALL Select MS-CE4000 Benchtop Centrifuge, 4,000 RPM includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hermle Z32-HK Refrigerated CentrifugeFeatures - Brushless induction drive - Microprocessor control - (more) Active imbalance detection and cut-off - Motor driven lid lock - Automatic rotor identifi cation system with over speed protection - Audible signal at the end of each run - Emergency lid lock - Stainless steel chamber - CFC-free refrigeration system (-20° to +40C) - Autoclavable rotors - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - Pre-cooling program - Standstill cooling - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10 increments - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed operation Interested in rotors and/or adapters for this centrifuge?Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z32-HK Refrigerated Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

This listing is for a Fisons SGP WhirliMixer Vortex Mixer. The unit is in full working condition an (more)d is ready for immediate release. The Fisons SGP WhirliMixer® Vortex Mixer is designed for rapid, efficient, and repeatable mixing in laboratories, offering a far superior alternative to hand shaking. Its innovative design creates a powerful vortex in the tube, ensuring highly effective and consistent mixing action across multiple samples. This not only eliminates contamination risks associated with stirring rods and stoppers but also enhances the repeatability of results. Equipped with automatic press-start operation, the mixer activates instantly when a tube is pressed into the rubber cup, making it ideal for repetitive tasks. The variable speed control allows precise adjustments, providing controlled mixing at a wide range of speeds, from gentle agitation to fast vortexing. This feature is especially beneficial in applications where the integrity of delicate cell structures needs to be preserved. The mixer can be set to operate continuously or on demand, depending on the needs of the application. Additionally, the skirted rubber cup design helps prevent spills from entering the mixer’s casing, ensuring durability and ease of maintenance. Key Features: Efficient Vortex Mixing: Creates a vortex for thorough mixing, reducing manual effort and improving sample consistency. Automatic Press-Start Operation: Activates instantly when a tube is pressed into the rubber cup, perfect for repetitive mixing tasks. Variable Speed Control: Offers controlled mixing across a wide speed range, allowing for both gentle and vigorous mixing. Continuous or On-Demand Operation: Can be set for continuous use or activated by pressing the tube into the cup. Skirted Rubber Cup: Prevents liquids from entering the casing, ensuring long-lasting performance and easy cleaning.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Planer Kryo 10 Series ii, MVE Lab 30, Controlled Rate Freezer System Lab This system was removed fro (more)m a university where it was surplus to requirement. All units are in reasonably good cosmetic condition. The Planer Kyro 10 Series ii Freezer & Planer Kyro 10 Series ii Biomed MR2 Printer both power on and pair successfully. The printer requires a Passcode which is available on request. We were unable to test the Planer LNP 4-C Freezer & Power Supply as the power supply cable is not included, therefore we are unable to confirm its working order. Also included are the following: 2 x washers for Paner FreezerSerial#: 24 707 2 x Spare paper for Planer Freezer Trolley stand with wheels

Yamato LT-500BA Complete Overhead Stirrer with Stand & 60mm 4-Blade Propeller, 115V Speed Range  (more) 25~1200rpm Max Torque 1.0N•m (10.0kgf•cm) Motor DC Brushless Motor 30W Features - Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir - Maintenance free DC brushless motor - Digital speed indicator for accurate speed setting and confirmation - Noise prevention measures for optimal work environment - More safety-oriented design Laboratory stirrer with well-blanced speed and torque for medium viscosity samples. Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir. Maintenance free DC brushless motor. Digital speed indicator for accurate speed setting and confirmation. Noise prevention measures for optimal work environment. More safety-oriented design. Set includes stand, rod, stainless steel shaft and 60mm 4-blade propeller. Speed range 25~1200 rpm. INCLUDED: The Yamato LT-500BA Complete Overhead Stirrer with Stand & 60mm 4-Blade Propeller, 115V includes: - Stand and Rod - Clamp, Safety Cover, Chuck Handle - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Scilogex Rotisserie Accessory for 50ml x 24 Tubes The Scilogex Rotisserie Accessory holds 24 x 50ml  (more)centrifuge tubes horizontally. For use with the MX-RL-Pro. INCLUDED: The Scilogex Rotisserie Accessory for 50ml x 24 Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty