Sanyo MSE Harrier 18/80 Refrigerated Centrifuge with 6000rpm Rotor Lab

Mini laboratory centrifuge 846070 for GREINER Bio-One microplates New equipment in its original pack (more)aging Speed: 2,550 rpm (16,022.1 rad.min-1) Capacity: 2 Microplates

Sorvall Legend RT Centrifuge This system was removed from a university lab where it was surplus to r (more)equirements. The unit powers on, but it shows Error 21 when attempting to spin, causing the unit to cut out. The refrigeration system functions well, and the unit is in good cosmetic condition with minor marks. Due to the error, this item is listed as Spares/Repair. The unit is fitted with the following rotor: - Sorvall Rotor - P/N: 75006445 - S/N: 004061 Includes:- 4 x Sorvall Swinging Buckets - P/N: 75015679

Optima LE-80K Ultracentrifuge Lab This item was removed from a university where it was surplus to re (more)quirement. It is in good cosmetic condition and in good working order. It has been temperature-tested and tested to the rotors maximum of 40,000rpm. Also included are the following: Beckman SW 41 Ti Rotor w/ 6 x Swinging buckets.

Turbomolecular vacuum pump Edwards EXT255H 24V. Pumping speed: 220 lit/sec. Inlet flange: ISO100. Ba (more)cking connection: KF25 Minimum size backing pump: 10CMH. Cooling: Water or Air. Edwards EXC 100 or EXC 120 Turbo Pump Controller is needed to operate the pump (excluded).

Benchmark C2205 MyFuge 5D Digital Microcentrifuge w/ Combination Rotor The myFuge™ 5D digital mini c (more)entrifuge includes a four position rotor that accepts a variety of 5ml tubes (including 5ml snap-cap and screw-cap centrifuge tubes, as well as 5ml blood collection tubes). In addition, the rotor has four positions for positions for standard microtubes (1.5/2.0ml) and offers optional adapters for 2ml cryotubes, 0.2ml PCR tubes, and 0.5ml microtubes, making it one of the most versatile and compact centrifuges in its class.The myFuge 5D offers digital speed control (up to 5,500 rpm). Timer is also controlled (up to 99 min.) with a safety interlock to stop the centrifuge if the lid is opened during operation. With built in rcf conversion, speed can be set/displayed in rpm or rcf. The myFuge 5D also comes with a 2-year warranty.INCLUDED: The Benchmark C2205 MyFuge 5D Digital Microcentrifuge w/ Combination Rotor includes: - Power Cord - COMBI Rotor - Two Year Manufacturer's Warranty

SCILOGEX SCI-1524R High Speed Refrigerated Micro-Centrifuge with 24 place rotorThe SCI-1524R Refrige (more)rated Micro-Centrifuge is a compact and powerful high-speed centrifuge used in physical and chemistry analysis, biochemistry, cellular and molecular biology, clinical Labs and blood donation centers, and is ideal for high-end research applications. - Sedimentation of cells and viruses - Separation of sub-cellular organelles - Isolation of macromolecules such as DNA, RNA, proteins or lipids Click Here to View Product Video INCLUDED: The SCILOGEX SCI-1524R High Speed Refrigerated Micro-Centrifuge with 24 place rotor includes: - Power Cord - One Year Manufacturer's Warranty

Vertex Velp digital thermoregulator The instrument can be combined with the most common heating magn (more)etic stirrers and is supplied ready for use, complete with temperature probe and power cable for direct connection to AREX, AREC.X, AREX-6 heating magnetic stirrers. Thanks to the PW 10 branch element, VTF can be used with all types of heating devices such as water and oil baths, hot plates, thermometers, etc. Temperature Accuracy The VTF thermoregulator can be used in many applications where precision, reliability and flexibility of use are required, as it is equipped with Fuzzy Logic, which allows the thermoregulation to be automatically adapted to different situations, such as power, load and heat loss. The highly sensitive probe offers state-of-the-art temperature control performance, with an accuracy of ± 0.5 ° C Exclusive Fixing System VTF is equipped with an exclusive and innovative integrated fixing system that facilitates the positioning of the Pt100 probe inside the most common beakers. The two lateral clamps allow the height adjustment of the VTF, while the friction system ensures its movement on the horizontal plane. No system will be as comfortable! - Integrated Digital Timer Another unique feature of the VTF is the integrated timer. It is in fact possible to select up to a maximum time of 24 hours and 59 minutes, while at the end of the countdown the instrument will automatically switch off the thermoregulation. The timer mode can be recognized by the alternating flashing of the 2 arrows on the left side of the display. - Technical features: Structure: technopolymer Fixing on rods: from Ø 10 to 13 mm Pt 100 stainless steel probe: length 250 mm and Ø 3 mm Display: LCD Degree of protection CEI EN 60529: IP 54 Power supply: 12 Vdc Weight: 0.3 Kg Dimensions (LxHxP): 75x145x120 mm Adjustment range: -10 ... +300°C Accuracy: ± 0.5°C Resolution: 0.2°C Timed operation: from 0:00 to 24:59 (h: min) Remaining time display: possible Display of maximum temperature reached: possible Display visualization and automatic switching off of the heating plate in case of: - Probe shorted - Probe interrupted

Scanner type: Flatbed, Color Photoelectric Device: Color CCD Line Sensor Effective pixels: 27,200 x  (more)37,440 pixels at 3200 dpi Document size: 216 x 297 mm (8.5 x 11.7 in.) A4 or US letter (You can set the scanning area with your software.) Scan resolution: 3200 dpi (normal scanning), 6400 dpi with micro step (interpolated scanning) Output resolution: 25 dpi to 12800 dpi, (50 to 6400 dpi in 1 dpi steps, 12800 dpi. 12800 dpi with zoom) Scan speed: 14.3 msec/line at 3200 dpi, 3.5 msec/line at 600 dpi Color Separation:RGB Color Filters on CCD Image data: 16 bits per pixel per internal color, 16 bits per pixel per external color Brightness: 7 levels (In EPSON Scan, Brightness is controlled with gamma correction) Line Art: Fixed Threshold, Text Enhancement Technology (selectable on and off) Halftoning: AAS (Auto Area Segmentation), Selectable on and off, 3 halftone modes (A, B and C) and 4 dither patterns (A, B, C and D) for bi-level and quad-level data Gamma Correction: 2 types for CRT screen, 3 types for printer, 1 user-defined setting Color correction: 1 type for CRT display, 3 types for output to printer, 1 type for user-defined setting (only user-defined color correction is available in EPSON Scan) Interface: USB 2.0 (Type B connector) and IEEE 1394 Serial Bus Interface Light source: White fluorescent lamp with cold cathode Flawless operation: 30,000 carriage cycles (failure-free interval) Dimensions (WxDxH): 304 x 476 x 122 mm Weight: 6.0kg

New Brunswick Scientific Innova U725G Ultra Low-Temperature Freezer Lab U725 -86 This was removed fr (more)om a university lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition. Internal dimensions: L61 W87 H136cmIncludes 2 Shelves: 55 x 84cm The manual and keys are included.

Stainless Steel HRP.H Platform Wherever high readability and precision are important. Wherever good  (more)repeatability in harsh industrial conditions matters. Stainless Steel HRP.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Unbreakable Stainless Steel HRP.H Platforms feature a modern electromagnetic mechanism design in a sealed steel housing and overload protection. The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. Stainless Steel HRP.H Platforms are distinguished by a high degree of protection IP 67. For an additional charge we will make HRP platforms in Ex version, but in order for the device to work in explosive areas, you need to supply the PUE HX5.EX terminal. Use the potential Stainless Steel HRP.H Platforms work with one of two weighing terminals: PUE HY10 or PUE 7.1. The terminals’ software enables you to archive your work results, ensures data safety, and allows the platforms to work with powerbanks from our offer. In turn, you will select appropriate antivibration tables for the platforms, and thus increase the readability of your measurements.

Ramp scale with stainless-steel load cells is intended for meat, fish, pharmaceutical, cosmetic and  (more)chemical industry. The scale is equipped with LD4N system allowing lifting the platform up, useful for maintenance purposes. The mechanism enables safe platform lifting and does not require physical exertion or additional equipment. Upon platform lowering, the scale is ready to carry out measurement. There is no need for recalibration. The scale is made of OH18N9 stainless steel and is equipped with PUE H315 indicator. On a customer request the scale can be made of steel of increased anti-corrosion resistance. The length of the cable for connecting the indicator to the platform - 3m. Ramp scale with LD4N system is equipped with only one ramp. Dual range weighing instrument for an additional charge. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.