Ohaus FC5718 Frontier Multi-Pro Centrifuge w/ Selectable Rotor

Megafuge 1.0R Heraeus refrigerated centrifuge Working temperature 0°C + 40°C. maximum speed 6000 rpm (more) Height x width x depth: 39x71x56 cm Net weight: 240 lbs (109 kg) 230 V. 50/60 Hz. 1100 W. With pendulum bucket rotor No. 2705. With nacelles 2252 Maximum swing rotor 5000 rpm. Max. permissible capacity: with rotating rotor 4 x 510 g With 2 adapters of 2 x 50ml With 2 adapters of 4 x 15ml Weakness in the cover cylinders Some traces of rust on the rotor Year of manufacture: 1992 Equipment tested Operational cold unit, tested at 4°C

HERMLE ZK-401 Refrigerated High Performance Centrifuge Maximum speed: 24,000 rpm Max. centrifugal fo (more)rce : 70,965 g (depending on rotor) Maximum filling quantity: 3000.0 ml (with suitable rotor) Power supply: 380V/50 Hz (CEE32 socket) 19.5A 11.0kVA Three-phase Dimensions: L x W x H = (825 x 765 x 940) mm Mass: approximately 320 kg Sound level: 69 dB(A) Setting temperature range: -20ºC to +40ºC Year of manufacture: 1990 Operating hours: 1403h With 5 rotors (4 fixed angular + 1 rotor with oscillating buckets): 2 X Fixed Rotor A12.17 Max speed: 16500 rpm For 12 tubes 1 X Fixed Rotor A6.14 Max speed: 14400 rpm For 6 tubes 1 X Fixed Rotor A8.24 Max speed: 24000 rpm For 8 tubes Equipment tested: 10000 revolutions => OK Cold group => OK Note: Commissioning must be carried out by a technician specialized in this type of high performance centrifuge

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Benchmark C5000-8-PT Sprint 8 Portable Clinical Centrifuge The Sprint 8 includes an eight position,  (more)fixed-angle rotor for the centrifugation of 10ml blood tubes (16 x 100mm), and 15ml conical tubes (17 x 120mm). Smaller blood tubes (12 x 75mm and 12 x 100mm) are also compatible with the use of optional adapters (C3100-ADP).With intuitive controls and a large LED display, virtually no programming or setup is required prior to starting a cycle. Simply use the up/down buttons to select the run time and press “START”. The safety lid-lock is engaged and the rotor quickly and smoothly accelerates to 3,400 rpm. Once the run time is completed (or the “STOP” button is pressed) the rotor comes to a complete stop and the lid lock is disengaged for the removal of samples.Ideal for Coag, PPP and urinalysis studies.INCLUDED: The Benchmark C5000-8-PT Sprint 8 Portable Clinical Centrifuge includes: - Portable centrifuge - Leveling kit - Car power adapter - One Year Manufacturer's Warranty

Speed (100 rpm increments): 100 – 4400 rpm Maximum RCF: 3000 x g Maximum capacity: 4 x 100 mL Accele (more)ration time: ≤ 19 s Deceleration time: ≤ 19 s Timer: 0 – 99 min, or continuous Dimensions (WxDxH): 320 x 400 x 240 mm Weight: 19 kg Equipped with: 1x Eppendorf A-4-38 swing-out rotor 4x Eppendorf 100 mL bucket 4x Eppendorf insert for 15 mL tube

RADWAG pipettes are modern measuring equipment designed and manufactured in accordance with strict s (more)tandards concerning manufacturing cleanliness and biodegradability of the product. The pipettes represent a new line of the 'liquid handling' product group, designed to quickly measure and transport liquids of small volume. They are characterized by high dosing accuracy and ergonomic, solid design. The pipette mechanism ensures exceptional accuracy and repeatability with reduced pressure on the pipetting button. All the pipettes are inspected for the conformity with the requirements of PN-EN ISO 8655 standard for dosing accuracy and repeatability. Each pipette is delivered with a test report featuring measurements results. The enclosed user manual contains a description of the pipetting techniques as well as verification and adjustment procedures that can be carried out by the user. Calibration certificates, issued by the accredited calibration laboratory are available on request. Features: Large and readable display that is fully visible during pipetting; Innovative soft grip preventing heat transfer to the pipette inside; Low pressure required to use the pipette reduces the risk of RSI; Simple click mechanism for changing the pipette volume; Option of autoclaving the whole pipette (disassembling not required). Recommended autoclaving process: 15 minutes at 121°C temperature, 1.05 bar pressure; Tip ejector collar is made of PVDF which has a high chemical resistance (also at high temperatures) and low susceptibility to microorganisms expansion; Ultra UV resistance; Convenient button for changing the tips; Compatible with most of the tips available on the market.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

The G 7735 Washer/Disinfector is intended for cleaning and disinfection of dental and general medica (more)l instruments and accessories. It cleans and when using the disinfection cycles, simultaneously thermally disinfects at (93 °C) instruments and accessories. Areas of effectiveness are physical removal or thermal inactivation of vegetative bacteria including mycobacteria, fungi, fungal spores and viruses.These categories include the Mycobacterium tuberculosis and the Enterococcus faecium.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW