MARSHALL Select MS-CE12000 Hematocrit Centrifuge, 12,000 RPM

This listing is for 1 of 6 Capricorn CEP2000 CentrifugeCapricorn Labs manufacture the CEP 2000 Bench (more) Top Centrifuges and offers full maintenance and servicing support for their centrifuges.The CEP Series of Bench Top Centrifuges have been designed specifically for use in clinical trials and are well established as reliable machines, which require very little maintenance. They have been developed to give high performance in a compact unit with simple, easy to use controls.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Speed range: 0 – 6000 rpm Speed accuracy: within 1% of set speed or ±20 rpm whichever is greater Tem (more)perature range: 0°C – 30°C Temperature accuracy: within 2°C of set temperature Chamber diameter: 584 mm Dimensions (WxHxD): 762 x 1206 x 1016 mm Weight: 303.5 kg Equipped with: 1x Sorvall H-6000A swing ot rotor (max 5000 rpm, 6 x 1000 mL capacity) 6x Sorvall 44040 bucket 6x Sorvall 00436 insert (5x 50 mL Falcon tube capacity)

Thermo Electron Heraeus Multifuge 4 KR Refrigerated Centrifuge with Rotor This was removed from a & (more)nbsp;lab where it was surplus to requirements. The unit has been fully tested and is in full working order up to 4400rpm. It is in good cosmetic condition but has a crack in the lid viewing window. It does not affect the operation. Included with it are; Sorvall Heraeus Rotor75006476Max 4400 rpm 4 x Sorvall Heraeus Buckets75006477 FMax 4400 rpm

Hermle Z216 M CentrifugeFeatures - Brushless induction drive - Microprocessor control - Active imbal (more)ance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Capacity: 3000 g Readability: 0.1 g Pan size: 190 x 190 mm Weight: 3.5 kg

Dimensions (HxWxD): 620 x 575 x 520 mm Internal dimensions (HxWxD): 580 x 535 x 455 mm

System consists of: Agilent G1322A Degasser Agilent G1311A Quaternary Pump Agilent G1313A Autosample (more)r Agilent G1316A Thermostatted Column Compartment Agilent G1314A Variable Wavelength Detector

Samples and applications - Sample preparation for DNA and organic tissue analysis - Organic tissue d (more)ispersions TECHNICAL DATA - Rotor diameter: 3.2 mm - Stator diameter: 5 mm - Stator/rotor gap: 0,4 mm - Volume (H2O): 0,2 - 50 ml - Immersion depth: 10-50 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 4,2 m/s - Ultimate fineness, emulsions: 1 -10 µm - Ultimate fineness, suspensions: 10 -50 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

The MW-01-A mass converter is designed to be a component of an industrial load cell scale. Depending (more) on the needs, communication with the mass converter can be carried out via the following communication interfaces: RS232, RS485, Ethernet, Ethernet IP, Profibus or Profinet. The MW-01-A mass converter is compatible with indicators and PC. Operation of the MW-01-A mass converter via PC is carried out using „MW Manager” software.