Hettich Rotofix 32 Centrifuge

This listing is for 1 of 2 Roche LC Carousel Centrifuge The LC Carousel Centrifuge 2.0 is an easy-to (more)-use centrifuge with a specially designed rotor that can hold one LightCycler® 2.0 Sample Carousel (for 20 µl or 100 µl capillaries) of the LightCycler® 2.0 Instrument.Type: Bentchtop centrifugeDimensions: 285 mm (H) x 315 mm (W) x 380 mm (D) (12 in W x 15 in D x 11 in H)Weight: 20.6 kg (45.4 lbs) without rotorCapacity: LightCyler® 2.0 Sample Carousel (20 μl or 100 μl) with 1 to 32 LightCycler® CapillariesOperating Time: Fixed program approximately 30 secondsSpeed: Max. 735 x gPower Source: AC 115-230 V, 50/60 Hz

This listing is for a Hettich Rotofix 32A CentrifugeA non-refrigerated general purpose centrifuge wi (more)th a large number of swing-out and angle rotors for routine laboratory applications. Features:Max RCF: 4226xgDims: 366 x 430 x 257mmMetal housing with metal lidStainless steel chamberViewing port in lidOne hand lid lockDigital control panelError displayImbalance switch offBrushless driveLarge variety of rotor and adapter optionsSpecifications:Max Capacity - 4 x 100mL, 6 x 94mLMax RCF, x g - 4,226Max RPM, rpm - 6,000Weight, kg - 23Refrigeration - Air coolingDims, w x d x h, mm - 366 x 430 x 257

Ortoalresa Cónsul 22 centrifuge. Maximum capacity of 4 x 400 ml. Maximum speed: 14300 rpm (21,948 xg (more)). Includes RT 288 rotor for 12/8/4 microtiter plates with maximum speed of 3500 rpm. Microprocessor control. TFT touch screen with real-time information. Speed regulation in steps of 100 rpm and acceleration and braking in steps of 1 second and up to 175 ramps. Timer. Fast spin button, with adjustable speed. Automatic rotor recognition. Motorized lid closure. Maintenance free induction motor. Forced ventilation. Dimensions: 490*620*390 mm, 47kg. Consumption: 600W. User manual. The compact and high-capacity Ortoalresa Cónsul 22 centrifuge has the advantages of equipment from higher segments. The type of control it provides, through its color TFT touch screen, provides the user with functionalities that enable, in addition to controlling the equipment by operating parameters, the possibility of exporting data for subsequent analysis and programming for operation in the future. The autonomy provided by this equipment allows the user to optimize work time in the laboratory, by automating cycles and operating modes. These features also guarantee process traceability and ensure that no parameter is left out of control.

Hermle Z496-K High Volume Floor Standing Centrifuge (230V ONLY) The Z496-K centrifuges offer the hig (more)hest tube/bottle capacity in our line. Several rotors are available, including a popular 4 position swinging bucket rotor with a wide offering of accessories for the centrifugation of tubes, bottles, plates and blood bags. The high capacity rectangular buckets accept microplates directly or a variety of tube inserts for accomodating as many as 40 x 50ml conical or 96 x 15ml conical tubes per run. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving up to 99 saved programs, the easy to use front panel can adjust accel/decel rates, time, and convert operation between rpm and rcf. The powerful refrigeration system, with a range of -20° to 40° C, also features a precool function that ensures the temperature of the chamber is optimized for any application. A standard floor standing model is available (height: 38.6 in.) which includes a convenient lower drawer for the storage of frequently used rotors and accessories. In addition, a space saving “underbench” model (height: 27.5 in.) is available when under the counter storage is preferred. Both models are equipped with wheels for easy maneuverability around the laboratory. For all your high capacity, high volume needs, the Z496-K floor standing series is the perfect centrifuge. INCLUDED: The Hermle Z496-K High Volume Floor Standing Centrifuge (230V ONLY) includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Hermle Z287-A Compact Universal Centrifuge The Z287-A exceeds the limitations set forth by tradition (more)al microcentrifuges which are restricted solely to fixed angle rotors for microtubes. Instead, this compact, next generation model features an expansive line of swing out and fixed angle rotors options that accept microplates and test-tubes up to 50ml. We’ve designed this centrifuge to be our most compact and economical. A true workhorse for any lab requiring a centrifuge that can accommodate many fields of research. Along with a broad range of available rotor options, the Z287-A introduces a convenient status indicator. Users can easily view the current state of the centrifuge from across the room. The LED illuminates to signify if the rotor is spinning, the run is completed or the centrifuge is idle in standby mode. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the EZ-Scroll touch wheel front panel can adjust accel/decel rates, and change the end of run alarm tone. Additionally this feature prevents debris buildup, leakage, and can be operated with gloves on. The Z287-A is a truly powerful and versatile centrifuge perfect for any research laboratory. INCLUDED: The Hermle Z287-A Compact Universal Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Ohaus Scout STX portable scale, with plate Ø 93mm These balances are ideal for laboratory and indust (more)rial applications. They feature an easy-to-navigate color touchscreen display and a compact design that allows for storage. They offer excellent performance with fast stabilization times and high resolution results. They are also equipped with excellent overload protection and advanced connection options. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Dynamic / Animal Weighing, Totalization, Density Determination, Display Hold, Molar Weighing Display 4.3'' (109 mm) touchscreen display with VGA color graphics resolution and user-controllable brightness Operation Power supply (adapter supplied) or batteries (not supplied) with low battery indicator and programmable automatic shutdown Communication RS232, USB host, USB device, Ethernet or Bluetooth® (available as accessories) Structure ABS housing, stainless steel deck, ABS draft shield (1 mg models only), weigh below hook, transport lock, manual calibration lock switch, safety slot, stabilizing feet, level indicator front illuminated Construction features Stability indicator, stackable design with storage cover included (except 1mg models), mechanical and software protection against overload and underload, battery life indicator, automatic shutdown, automatic tare, calibration mass provided on models with capacity higher than 620 gr. Integrated applications: - Weighing: determines the weight of the objects on the pan in the selected unit of measurement. - Piece Counting: Counts the number of pieces on the pan using a uniform weight. - Percent Weighing: Measures the weight of a sample displayed as a percentage of a preset weight reference. - Weight check: compares the weight of a sample with respect to the target limits. - Dynamic Weighing: Weighs an unstable sample load. The scale takes an average of weights over a period of time. - Totalization: measures the cumulative weight of multiple objects. The cumulative total can exceed the capacity of the balance. - Density determination: determines the density of solids or liquids. With the integrated weigh below hook, specific gravity tests can be performed for objects that cannot be easily placed on the weighing pan. - Display Hold: Manually holds the last stable weight or the first highest stable weight value on the display. - Mole Weighing: Measures the weight of a sample and  calculate it into Moles automatically

KNF IP65 FEM 1.02 TT.18S Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to suit m (more)ost laboratory liquid metering and dosing needs. The FEM 1.02 TT.18S version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: PVDF head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue.INCLUDED: The KNF IP65 FEM 1.02 TT.18S Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

RET control-visc Speed Range 50 to 1,700 rpm Temperature Setting Range 0 - 340 °C Setting accuracy s (more)peed 10 rpm Features - BNC socket for connection of a pH electrode - Adjustable temperature control mode: rapid heating and very accurate temperature control - Dual sensor for simultaneous control of heat transfer fluid temperature and medium temperature - Timer and countdown functions - Display of viscosity change trend - Detached magnet detection - Intermittent operation - Several modes of operation available - Safety circuit adjustable from 50 to 380° - Transparent protective cover included - Error code display for easy troubleshooting - Exact temperature and speed adjustment by means of digital display; even when function switched off - Suitable for unsupervised operation - Sealed casing (IP 42) ensures a long service life PATENTED WORLD FIRST: Safety magnetic stirrer with heating and integrated balance. Clear, multilingual TFT display makes it easy to set all parameters. Integrated temperature control feature enables connection of a temperature probe, placed directly in the medium, to control medium temperature with a high degree of precision. PT 100 temperature sensor is included. The stainless steel composite hot plate, reaching a temperature of 340 °C, enables rapid heating. RS 232 and USB interfaces enable pc control of the magnetic stirrer and documentation of all test parameters. "Lock" function prevents inadvertent changes of speed and temperature settings. As a safety feature, the current temperature is displayed when the unit is switched off but surface is still hot. Below 50 °C the display turns off automatically.INCLUDED: The RET control-visc includes: - RET control-visc - PT 100.70 Temperature sensor - IKAFLON® 30 Magnetic stirring bar - IKAFLON® 40 Magnetic stirring bar - Screw driver - H 104 Cover for RET control - USB Cable - USB A to Micro-B, 2 m - 2 Year Manufacturer's Warranty

Benchmark DC4020 DryChill Ice-Free Cooling Block, 40 x 1.5/2.0ml Temperature Holds 4°C for up to 230 (more) Minutes Capacity 40 x 1.5/2.0ml Warranty 2 Year Manufacturer's Features - Ice-free, stable cooling for sample tubes - Unique design reduces condensation - Maintains 4°C for up to 200+ minutes - 4 sizes for various tubes up to 50ml - Visual temperature indicator - 2 Year Manufacturer's Warranty