Hettich Lab Technology Hettich MIKRO 220 R , Cooled Microcentrifuge

Heraeus Instruments Labofuge 400R Function Line Lab This item was removed from a university where i (more)t was surplus to requirement. It is in fairly poor cosmetic condition and powers on, however, due to an issue with the cooling/heating element it did not reach any desired temperature when tested. Therefore, it is listed as Spares/Repair. Additionally, it was tested to its maximum speed of 4500RPM, which performed well with no issues.

Beckman Coulter Avanti J-25 Centrifuge This item was removed from a university laboratory where it w (more)as surplus to requirements. The centrifuge powers on and is in fair cosmetic condition. The condenser appears to be functional as the unit begins to cool, but a drive error is displayed on the centrifuge.Upon inspection, it was found that the motor had been disconnected, the front panel removed, and most wiring disconnected. This item is sold as-is for Spares/Repairs due to its current state. Specifications:- Serial No.: 270-728845-AA - Model No.: Avanti J-25

Thermo Scientific Sorvall Legend XFR Centrifuge This item was removed from a university where it was (more) surplus to requirement. It is in good cosmetic condition both internally and externally. The item powers on and works as intended, it has been temperature-tested. (Thermometer not included) Also includes the following: Thermo Scientific 75003607 TX-750 Rotor & 75003608 750mL Round Buckets (set of 4)Max Speed: 4700 rpmMax RCF:4816 x g

Scilogex DM1424 Hematocrit CentrifugeThe DM1424 Hematocrit Centrifuge with AC24P rotor is used for d (more)etermination of volume fractions of erythrocytes in blood and also for separation of micro blood and solutions. The DM1424 conforms to international safety standards and regulations.The SCILOGEX DM1424 centrifuge is certified with CE, cTUVus and FCC. MCA test according to IEC/EN61010-2-20 including explosion-proof and bio-safe tests. Passed EN61010-2-101:2002 requirements for invitro diagnostic (IVD) medical equipment. Features: High accuracy of speed, excellent performance CPU controls all operating parameters including speed and time RPM or G-force can be set and displayed Operation can be timed from 30 seconds to 99 minutes or continuous running Timer commences once the set speed is reached, so the separation time is more accurate Gentle braking at low speeds with efficient separation Parameters can be modified after the set speed is reached Quick spins are possible by pressing and holding PULSE key Automatic release the lid when operation has stopped to save processing time Easy-to-read backlit LCD processing display and sound alert Can be pulse accelerated and held at speed High strength aluminum hematocrit rotor included (optional fixed angle rotor for 1.5/2.0ml tubes) Brushless motor drive quickly and effortlessly accelerates the rotor to set speed 2 YEAR WARRANTY Click Here to View Product Video INCLUDED: The Scilogex DM1424 Hematocrit Centrifuge includes: - AC24P Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Perkin Elmer Lambda 35 UV/VIS Spectrophotometer System w/ PC & Software This was removed from a  (more)university lab where it was surplus to requirements. The unit has been professionally serviced and is in good working order. It is in good cosmetic condition with minor marks.

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

F1 Mass Standard - knob weights, service case. Nominal value - 1000 kg.

The HX7.4 C scale is a solution based on a stainless steel PUE HX7 terminal (AISI 304) and a powder  (more)coated 4-load-cell platform. The terminal The terminal is characteristic for a 7” colour graphic display. Its novelty is a red-green 9-diode bar graph presenting the current net mass in reference to the scale range or preset min and max thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing.

Eppendorf 1 x 80-120ml Adapters, Cat. # 022638424 The Eppendorf 1 x 80-120ml Adapters, Cat. # 022638 (more)424 are for use with the Eppendorf A-4-62 Swing Bucket Rotor for the Eppendorf 5804/R and 5810/R Centrifuges. These adapters feature a capacity for 1 x 80-120ml round bottom tubes each with the maximum tube dimensions (Diameter x Height) of 45mm x 138mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 1 x 80-120ml Adapters, Cat. # 022638424 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 1 x 80-120ml Adapters, Cat. # 022638424 SpecificationsBottom ShapeFlat with Rubber MatRotor CompatibilityEppendorf A-4-62 Swing Bucket Rotor