Hermle Z496-K High Volume Floor Standing Centrifuge (230V ONLY)

This listing is for 1 of 4 DiaMed 12 SII ID-CentrifugesThe centrifuge of the brand Diamed type 12SII (more) is designed to separate different components in a sample. This centrifuge is suitable for centrifuging samples in up to 12 ID cards. The Diamed type 12SII has a wide range of applications, including research and routine laboratories in life sciences, industry, clinics and chemistry.

The Frontier 5306 minimizes noise and interruptions in the laboratory: low input voltage power, sile (more)nt brushless motor and a rubber base that absorbs vibrations. Operator safety: rotor imbalance sensor and two safety switches that immediately stop the rotors if the lid remains open during use. Unprecedented ease of use: just place the sample in the centrifuge, close the lid and the centrifuge will start spinning without pressing any buttons. Operation AC power (included) Structure Silent brushless motor, small footprint Construction features Easy to install design Technical features Speed ​​range: 0 rpm – 6.000 rpm Maximum relative centrifugal force: 2.000 g Maximum flow rate (rotor): 8 x 1,5/2,0 ml Program memories: 0 Acceleration gear: 1 Deceleration gear: 2 Lid lock: mechanic Noise level: ≤60 ± 2 dB (A) Rotor Compatibility: Angled 8 x 1.5 / 2.0ml; Angled 4 x 8 PCR strips Execution time: continuous Safety certification: CE; FCC; TUV The Ohaus Frontier 5306 minimizes noise and interruptions in the lab: low input voltage power, a quiet brushless motor, and a vibration-absorbing rubber base. Operator safety: rotor imbalance sensor and two safety switches that stop the rotors immediately if the lid is left open during use. Unprecedented ease of use: just place the sample in the centrifuge, close the lid and the centrifuge will start spinning without the need to press any buttons. The KIT includes two rotors, described below. Maximum relative centrifugal force (x g) at 2,560 g; top speed at 6,000 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 45 mm. Maximum relative centrifugal force (x g) at 2,260 g; top speed at 6,000 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 32 mm. TECHNICAL FEATURES Speed ​​range: 0rpm – 6,000rpm. Maximum relative centrifugal force: 2,000 g. Maximum flow rate (rotor): 8 x 1.5/2.0ml. Program memories: 0. Rotor Pack: 8 x 1.5ml/2.0ml Angled Rotor; angled rotor 4 x 8 PCR strips. Accelerator gear: 1. Deceleration gear: 2. Screen (2): without display. Lid lock: mechanical. Net weight: 1.1kg. Noise level: ≤60 ±2 dB(A). Rotor Compatibility: Angled 8 x 1.5/2.0ml; angled 4 x 8 PCR strips. Rotor recognition method: not applicable. Runtime: Continuous. Safety Certification: CE; FCC; TUV.

Microcentrifuge Centurion Scientific C2012. Speed of 500 to 12,000 rpm (13.500 g). Timer 0 to 99 min (more). Brushless Motor, maintenance free. Chamber of stainless steel and alloy structure. Sensors for imbalance, overspeed and warming. Does NOT include rotor (can be purchased separately).

Hermle Z366 K Refrigerated Centrifuge w/ Swing Out Rotor For applications requiring increased capaci (more)ty over the Z306 or Z326 series centrifuges, the Z366 series offers a unique “Mid-Range” swing out rotor that accepts a variety of different tubes, including up to 16 x 50ml or 40 x 15ml. In addition to the popular 4 x 250ml swing out rotor, a variety of additional rotors are also available. Angled rotors range from a 24 x 1.5ml micro rotor to a high capacity 6 x 250ml rotor. A 2 x 3 microplate rotor is also available, as well as a 4 x PCR strips (8-strips) rotor. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates, and change the end of run alarm tone. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z366 K Refrigerated Centrifuge w/ Swing Out Rotor includes: - Z366-250-HC 4 x 250ml Capacity Swing Out Rotor - Z366-250-B50 4 x 50ml Conical Buckets (Set of 2) - Z366-250-B15 10 x 15ml Conical Buckets (Set of 2) - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The PR Series Precision and Analytical Balances ensure competitive performance at an affordable pric (more)e and offer accuracy and repeatability in essential weighing applications in the laboratory, industrial and educational environments. Equipped with RS232 connectivity for easy communication, a backlit display and a simple interface for easy operation, the PR series scales are perfectly designed for your workstations. Applications Basic Weighing, Piece Counting, Percent Weighing Display Backlit liquid crystal display (LCD) Operation AC adapter (included) Communication RS232 (one port included) Structure ABS upper armor, removable stainless steel plate, removable glass screen with sliding top door, integrated weigh below hook, safety bracket, calibration lock Construction features User selectable environmental filters, brightness adjustments, auto tare, auto dimming, user selectable measuring range adjustment points, software lock and reset menu, user selectable communication settings and print options , user-configurable project and user ID, software overload and underload protection indicator, stability indicator

Platform scale with 1 sensor Radwag C315.30.F1.R. Capacity from 200g to 30kg. Readability [d] 10g. P (more)late size 300 x 300mm in AISI304 stainless steel. LCD terminal (with backlight) on platform. RS232 interface. Functions: Plus/Minus control, percent weighing, totalizing, parts counting, internal battery, peak hold, GLP procedures, animal weighing, ALIBI memory. A dual range scale can be made for an additional fee. The C315 single sensor balance is designed for accurate mass determination in light industrial conditions. It is equipped with a PUE C315 gauge with a backlit LCD display. The balance frame is made of powder coated steel with a stainless steel pan. The balance has two power sources: mains and battery.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database – access to databases Function – access to basic functions F1 and F2 – programmable function keys and menu navigation keys Reports – access to database of drying process reports Profile – access to parameters settings Sample – access to products database

Chamber dimensions (Ø x depth): 500 x 500 mm Capacity: 117 L See for additional info: https://www.sy (more)stec-lab.com/autoclaves/vertical-top-loading-autoclaves-40-150-l/