Hermle Z446-K Refrigerated Centrifuge, 115V

Beckman J2-21 Floor Standing Centrifuge This was removed from a university lab where it was surplus  (more)to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with only minor marks from use. Included are; Beckman J2 - 21 CentrifugeCat no. 341737SN - E948 Rotor Type - JA 10SN - 1734210,000rpm MaxHold 6 x Buckets 7cm diameter

This Heraeus Biofuge Pico Centrifuge with 3324 Rotor was removed from a university lab where it was  (more)surplus to requirements. The unit powers on and is in good cosmetic condition. There are some light tape marks from general use. The lid opens, the brake works and all buttons appear to be responsive. The LCD screen is working and displays clearly. The unit was tested at the max speed of 13000rpm and ran smoothly. The unit has the following rotor fitted; Heraeus Rotor #3324•PP1/96•Max Speed 13000rpm• Max load 24x4g•24x 2.0 flat cap tube holders. No further testing done.

Labconco 7548500 PTFE-Coated Microcentrifuge Tube Rotor PTFE-Coated Aluminum Rotor for CentriVap mic (more)ro IR. Holds 24 1.5ml microcentrifuge tubes. INCLUDED: The Labconco 7548500 PTFE-Coated Microcentrifuge Tube Rotor includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Max speed: 6000 rpm Max RCF: 2000 x g Max capacity: 6 x 1.5/2ml Dimensions: (WxHxD): 130 x 120 x 150 (more) mm Weight: 500g

Cytocentrifuge based on Hettich Universal 320. Includes 1626 angle rotor for 6 vessels. Vmax: 4,000  (more)rpm; 2,039 g. Includes only 2 vessels with capacity for 4 cytochambers (2 per vessel). Cytochambers (not included) sample capacity from 1 to 8 mL. Maximum capacity 12 cytochambers. More vessels can be independently budgeted to complete maximum capacity. Not refrigerated. Analog rotary control and digital display (10 programs). Emergency stop. Acoustic signal. Includes manual. The Hettich cytology system makes it possible to produce a high-quality cytology preparation from a wide variety of body fluids. With large volume cytology chambers it is possible to process sample volumes of 8 ml or 2 x 8 ml. This makes cell concentration superfluous in many cases. On the other hand, when using the two-step procedure, no cells are lost during sedimentation because the cytology chamber is tightly attached to the slide. Drying is carried out in a second centrifugation step when the cells are already attached to the slide. It also allows the specific preparation of dry or wet preparations. Ideal for urinalysis, abdominal & spinal fluids, cysts, biopsies, ascites, Pap tests, CSF, viral infections, bronchial secretions, pleura, pericardium fluid, fine and needle aspiration among others.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Thermo Scientific Accela HPLC System was removed from a university lab where it was surplus to  (more)requirements. The system powers up but has not been tested further at our facility. The system is in very good cosmetic condition with only minor marks from use. Included are; 1 x Thermo Scientific Accela PDA Detector.1 x Thermo Scientific Accela Autosampler.1 x Thermo Scientific 1250 Pump.Set of Accessories

This listing is for a Sartorius Sartocheck 3 Plus Filter Integrity Tester.The unit is in full workin (more)g condition and is ready for immediate release.The Sartorius Sartocheck 3 Plus Filter Integrity Tester is an advanced instrument designed for the precise testing of membrane filter systems, making it essential for biochemistry and pharmaceutical applications. Here’s a detailed breakdown of its features and specifications:Key Features:Microprocessor Control: Offers programmable protocols for testing filter systems, allowing users to store up to 60 programs directly and expand to 240 with a memory card.Integrity Testing: Designed to ensure the integrity of membrane filters, minimizing the risk of using defective cartridges.Comprehensive Testing Protocols: Includes a variety of tests such as:Diffusion TestBubble Point TestCombined Diffusion and Bubble Point TestWater Intrusion TestWater Flow TestPressure Drop TestMultipoint Diffusion TestData Reporting: Generates complete paper reports to meet cGMP requirements, detailing:Test parameters (pressure, time)Results (net volume, pressure drop, evaluations)Filter cartridges used and products testedUser-Friendly Cleaning Protocol: Provides on-screen instructions for cleaning, compatible with any cleaning reagent due to its stainless steel construction.Manufacturer Specifications:Power Requirements:Operating Voltage: 100-240 V ±10%Phases: 1 Ph/NGrounding Conductor: Separate SL (yellow-green)Frequency: 47-63 HzProtection Rating: IP 44, indicating resistance to dust and splashing water.Pressure Specifications:Maximum Operating Pressure: 10 bar gOperating Pressure: Minimum 4 bar gInternal Limit Pressure: 10 bar gMaximum Power Input: 74 WattsInstallation: Must adhere to VDE regulations.

Benchmark IPS7000-5 MHS-5 5-Position Hotplate Stirrer The Benchmark Multi-Position Hotplate Stirrers (more) provide simultaneous heating and stirring of multiple samples. The large top-plates feature a durable, chemically resistant, white-ceramic coating that provides exceptionally uniform temperature control up to 120°C. Both mixing speed and temperature are conveniently controlled on the digital display, which also features a safety LED that warns the user when the top plate is hot and unsafe to touch. Two models are available, offering either 5 or 10 stirring positions. Each stirring position is driven by an independent motor, providing efficient mixing of sample sizes up to 1000ml. With increased spacing (100mm) between stirring positions, the top surface is designed to accept a wide range of vessel types, including beakers, Erlenmeyer flasks and media storage bottles. INCLUDED: The Benchmark IPS7000-5 MHS-5 5-Position Hotplate Stirrer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards XDS35iC Dry Scroll Pump Ultimate Vacuum 1 x 10-2 mbar Inlet Connection NW40 Displacement 43  (more)m3h-1 / 25 ft3min-1 Features - High ultimate vacuum and rapid pumping speed ensure efficient operation across a wide range of laboratory and industrial applications - Quiet operation provides a comfortable working environment, reducing noise in sensitive areas - Features a pressurized oil system that lubricates pump shaft bearings and rotor sealing faces for reliable performance - Maintenance is simplified with an oil sight-glass for easy monitoring of oil levels and conditions at a glance - Facilitates easy oil changes with an oil drain plug that allows either gravity or pressure oil drainage for convenience - Compact, freestanding design allows flexible use without the need for additional support structures - Ideal for use with analytical instruments, leak detectors, helium research, and for backing turbomolecular pumps, showcasing its versatility Scroll pumps are an excellent alternative to rotary vane pumps where oil free pumping is desirable. The XDS pumps in particular use an innovative bearing shield to isolate the vacuum environment from all forms of lubricant not only making them totally dry, but also protecting the bearing from any process gases. Vapour handling is enabled by an adjustable gas ballast; this allows the range of pumps to satisfy many applications that were previously off limits to other scroll pumps. The Edwards XDS35iC features Chemraz internal valves and stainlesssteel fittings for extra protection from the pumped media. The ‘C’ series isbetter designed for more aggressive applications as opposed to the standardseries. Click Here to View Product Video INCLUDED: The Edwards XDS35iC Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards XDS35iC Dry Scroll Pump Technical SpecificationsDisplacement 50 or 60Hz43 m3h-1 / 25 ft3min-1Peak pumping speed 50 or 60Hz35 m3h-1 / 21 ft3min-1Ultimate vacuum (Total pressure)1 x 10-2 mbar / 8 x 10-3 TorrMax inlet pressure for water vapour35 mbar / 23 TorrMax water vapour pumping rate – GB I70 gh-1Max water vapour pumping rate – GB II240 gh-1Max allowed outlet pressure0.2 bar gauge / 2.9 psig*Max allowed inlet and GB pressure0.5 bar gauge / 7 psigMotor power0.52kWPower connectorIEC EN60320 C19Nominal rotation speed1750 rpmWeight48 kg / 105 lbInlet flangeNW40Exhaust flangeNW25Noise level57 dB (A)Vibration<4.5mms -1 (rms)Leak tightness (static)<1 x 10-6 mbar ls-1Operating temperature range10 to 40 °C / 50 to 104 °FElectrical Requirements115/230V

Mild steel powder coated weighing platform We provide you with mild steel powder coated weighing pla (more)tforms with readability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms have a square shape of 300 x 300 mm or a rectangular shape of 400 x 500 mm or 500 x 700 mm. Use the potential Our platforms can work with one of eight weighing terminals to choose from: PUE CY10, PUE H315, PUE C315, PUE C32, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. Power of steel The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. The frame is made of mild steel. Mild steel powder coated weighing platforms are marked by a high degree of protection IP 65.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW