Hermle Z366 Centrifuge

This listing is for a D3024R Refrigerated Micro-CentrifugeFeatures:User-friendly large LCD display p (more)rovides all visual informationQuiet and stable operation benefit lab environmentBrushless motor drives quickly and effortlessly accelerates the rotor to set speedFully autoclavable Bio-safe rotorDual door interlock design, more safeGently braking at low speed, better separationSpecifications:Max. Speed: 15000rpm (200-15000rpm), increment: 10rpmMax. RCF: 21380—g, increment: 10—gRotor: 1.5/2mlx24 (included), 0.2/0.5mlx36 (supplied separately), 5ml round bottom x18 (supplied separately), 5ml eppendorf x12 (supplied separately), PCR8x4 serial tubes (supplied separately)Run Time: 30sec~99min~HOLD (Continuous operation)Driving Motor: Brushless motorAdditional Features: Speed/Acceleration switch; Short-time run function; sound-alert functionSafety Devices: Dual door interlock, Over-speed detector, Over-temperature detectorAutomatic internal diagnosisTemperature Range (D3024R): -20 °C to +40 °C

Angular rotor for centrifuge F45-36-8 EPPENDORF New equipment in its original packaging The Eppendor (more)f F-45-36-8 fixed angle rotor is intended for use in the Eppendorf 5415D and 5415R centrifuges. Reference: F45-36-8 13200 rpm 36X0.5ml 16.110 x g With lid

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Eppendorf 5427R Refrigerated Centrifuge w/ FA-45-30-11 Fixed Angle Rotor The Eppendorf 5427R Refrige (more)rated Centrifuge w/ FA-45-30-11 Fixed Angle Rotor stands out when it comes to meeting the demand for high sample throughput, unlike many other centrifuges that struggle with capacity limitations. This centrifuge boasts increased workloads, delivering rapid run times with unwavering reliability. What sets this centrifuge apart is its user-friendly design and intuitive interface, ensuring a comfortable and straightforward user experience allowing easy adjustments within the speed range of 100 to 16,220 RPM. Consequently, the 5427R emerges as the perfect solution for advanced research needs. Moreover, it incorporates innovative compressor technology that takes ecological considerations into account. This technology allows for precise temperature control from Ambient -11°C to +40°C, safeguarding sensitive samples and ensuring their optimal preparation for analysis. The 5427R also offers a wide range of high-quality aluminum rotors tailored to specific applications. In addition to established rotor types, it introduces specially designed models to cater to diverse research requirements.The included FA-45-30-11 Fixed Angle Rotor reaches a maximum speed of 14,000 RPM and maximum RCF of 20,817 x g. INCLUDED: The Eppendorf 5427R Refrigerated Centrifuge w/ FA-45-30-11 Fixed Angle Rotor includes: - FA-45-30-11 Fixed Angle Rotor with Aerosol Lid - Rotor Wrench - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Eppendorf 5427R Refrigerated Centrifuge w/ FA-45-30-11 Fixed Angle Rotor SpecificationsMaximum Speed16,220 RPM (14,000 RPM with included rotor)Minimum Speed100 RPMMaximum RCF25,001 x g (20,817 x with included rotor)Maximum Capacity48 x 1.5/2.0 ml (30 x 1.5/2.0ml with included rotor)Temperature Range-11°C to +40°CTimer10 seconds to 9:59 hours, with continuous runAcceleration Time22 secondsDeceleration Time19 secondsNoise Level< 56 dB(A)Dimensions (W x D x H)12.6 x 21.3 x 10 in. (31.9 x 54 x 25.4 cm)Weight66.1 lb. (30 kg)Electrical Requirements120V, 50/60Hz, 4.6A, 550WComparison of ModelsSpecifications5424R w/ FA-45-24-115425R w/ FA-24x25427R w/ FA-45-30-115702R w/ A-4-385810R w/ A-4-625810R w/ A-4-815910 Ri w/ S-4xUniversal5920R w/ S-4x1000Max Speed (RPM)150001506016,220 (14,000 with rotor)440014,000 (4,000 with rotor)14,000 (4,000 with rotor)14,000 (4,500 with rotor)13,700 (3,700 with rotor)Max RCF (x g)211302130025,001 (20,817 with rotor)300020,800 (3,200 with rotor)20,800 (3,200 with rotor)22,132 (3,849 with rotor)21,194 (3,428 with rotor)Capacity24 x 2.0 ml24 x 1.5/2.0 ml, 10 x 5.0 ml48 x 1.5/2.0 ml (30 x 1.5/2.0 ml with rotor)4 x 100 ml4 x 400ml (4 x 250ml with rotor)4 x 400ml (4 x 250ml with rotor)4 x 1000ml4 x 1000ml (4 x 1000ml with rotor)Temperature Range-10°C to +40°C-10°C to +40°C-11°C to +40°C-9°C to +40°C-9°C to +40°C-9°C to +40°C-11°C to +40°C-11°C to +40°CTimer30s to 9:59h10s to 9:59h10s to 9:59h1 to 99 min1 to 99 min1 to 99 min10s to 99h 59m10s to 99:59hDimensions (WxDxH)9.30 x 12.60 x 8.94 in11.42 x 18.9 x 10.24 in12.6 x 21.3 x 10 in380 x 580 x 265mm24 x 28 x 13 in24 x 28 x 13 in28.3 x 25.9 x 14.5 in29.2 x 27.8 x 15.9 inWeight21 kg46.3 lb (21 kg)66.1 lb (30 kg)36 kg218 lbs218 lbs240.3 lb (109 kg)306 lbPower Requirements120V, 50-60 Hz120V, 50/60Hz, 3.2A, 360W120V, 50/60Hz, 4.6A, 550W120V, 50-60 Hz120V, 50/60Hz, 20A120V, 50/60Hz, 20A120V, 60Hz, 12A120V, 50/60Hz.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

Speed (100 rpm increments): 100 – 4400 rpm Maximum RCF: 3000 x g Maximum capacity: 4 x 100 mL Accele (more)ration time: ≤ 19 s Deceleration time: ≤ 19 s Timer: 0 – 99 min, or continuous Dimensions (WxDxH): 320 x 400 x 240 mm Weight: 19 kg Equipped with: 1x Eppendorf A-4-38 swing-out rotor 4x Eppendorf 100 mL round bucket 4x Eppendorf insert for 4 round bottom tubes

Maximum speed: 30000 rpm Maximum RCF: 65395 xg Maximum capacity: 6 x 250 ml Speed range: 200 – 30000 (more) rpm Temperature range: -20°C to 40°C Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments Dimensions (WxHxD): 715 x 420 x 510 mm Weight: 91 kg Equipped with: 1x Hermle 221.21 fixed angle rotor 6x Hermle 12/001 1x 50 ml falcon tube adapter 6x Hermle 13/001 4x 15 ml falcon tube adapter

ESP is a very compact ultra-flat magnetic stirrer, with no moving mechanical components and maintena (more)nce-free. The control panel is protected from possible damage caused by any leaks of liquids, thanks to a special groove that favors the sliding of the liquid. Excellent agitation is guaranteed by the smooth start and the quickly reachable maximum speed of 1100 rpm. In short: - Maintenance free: no moving parts - The control panel is protected against liquid spills with a drain groove - The technopolymer casing resists chemicals - Accepts bottles up to 5 liters - Designed for maximum durability and backed by a 3 year warranty - Ergonomic - very low height - Speed ​​regulation up to 1100 rpm - Universal mains voltage / frequency range - Light - Ideal surface for viewing particles and color variations - Soft start but quickly reaches the set speed - Ideal for microtiter, microbiology and biochemistry

Sorvall Heraeus 6444 rotor for Sorvall Legend RT / T Plus centrifuge, Thermo Scientific Sorvall RC4  (more)Series, Heraeus Cryofuge 5500i, and Heraeus Multifuge 4. Speed of 5.650 rpm. Capacity for 2 large microplates or 10 normal microplates. 33 cm diameter Specifications: Designation Rotor Plate high: 2 x 500 ml Maximum permitted load [ g ] 2 x 523 Maximum speed nmax [ rpm ] 5250 Maximum RCF to nmax 5083 Radio(max.) [ cm ] 16.5 Acceleration / deceleration [ s ] 110 / 55 Heating of samples n maximum relative temperature room of 23 ° c. Time operation 1 hour 13°C Spray-fit: IF

IKA Oven 125 Control Drying Oven w/ Glass Door Heat Output 1500 W Working Temperature room temp. + (more)5 - 300 °C Operating Area Inner chamber 550 x 525 x 450 mm Features - Powerful IKA Oven 125 series for drying, heating, ageing, with rapid and precise temperature control. - 125 l high-quality insulated interior for cost efficiency, odour reduction, and uniform temperature. - Heats up to 300°C with TWB security features and independent temperature curve monitoring. - Glass door enhances monitoring of samples, ensuring safety and precision. - Well-lit interior, automatic fan-off when door opens, and up to 6 stainless steel shelves. - Includes interface for an extra sensor and USB storage for direct regulation and data logging. - Two TFT displays for clear parameter visibility, intuitive user interface for profile management. - Equipped with real-time clock for digital documentation and programmed start. The models in the IKA Oven 125 dry series are powerful drying cabinets for temperature regulation, drying, ageing and heating tasks. Rapid heating and exact temperature regulation guarantee reproducible results in industrial laboratories, schools and universities, research, quality control or science. Thanks to its high quality insulation, the device has a very large interior of 125 l in relation to its total volume. This structure also reduces odour emissions and operating costs and ensures excellent temperature uniformity.The Oven 125 control dry recirculating air drying cabinet heats up to 300 °C. The additional temperature selection limited TWB (DIN 12880) meets the highest security requirements. Furthermore, the temperature curve can be monitored during testing independently of the safety temperature. This means that your test material is always protected.The glass door allows for better monitoring of your samples.A well thought out interiorThe generously dimensioned interior of the Oven 125 control dry is comfortably illuminated. A practical cable bushing at the rear of the device is provided as standard for measurements in the oven or in the test material. The fan switches off automatically if the door is open. Up to 6 insertable shelves can be accommodated in the interior made of stainless steel.InterfacesThe Oven 125 control dry offers an interface for an additional sensor for direct temperature regulation in the test material. Test parameters can be stored directly on a USB stick.Two displaysAll important process parameters are displayed clearly on two large TFT displays. The temperature profiles and individual user profiles can be entered via the intuitive user interface. The real-time clock enables convenient digital documentation and a time-delayed start.Click Here to View Product Video INCLUDED: The IKA Oven 125 Control Drying Oven w/ Glass Door includes: - IKA Oven 125 control - dry glass - IO T 1.00 (2x) - Tilt protection (2x) - Screwdriver (for adjustment of temperature limit) - USB cable - Calibration certification - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Oven 125 Control Drying Oven w/ Glass Door Specifications Heat output1500 WWorking temperatureroom temp. +5 - 300 °CAdjustable safety circuit50 - 270 °CAdjustment and display resolution0.1 KTemperature stability (150°C, center, standard door)0.5 ±KTemperature displayyesTimeryesTimer displayLCDTime setting range1 - 142560 minNumber of trays max.6Load for one tray max.30 kgOperating area inner chamber550 x 525 x 450 mmTotal volume inner chamber125 l Air outlet port diameter inside48 mm Dimensions (W x H x D)700 x 825 x 650 mmWeight89 kg Permissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interfaceyesUSB interfaceyesVoltage220 - 240 / 115 / 100 VFrequency50/60 HzPower input1600 WPower input standby2 WComparison of ModelsSpecificationsIKA Oven 125 BasicIKA Oven 125 Basic w/ Glass DoorIKA Oven 125 ControlIKA Oven 125 Control w/ Glass DoorHeat Output1500 W1500 W1500 W1500 WWorking Temperature RangeRoom temp. +5 - 250 °CRoom temp. +5 - 250 °CRoom temp. +5 - 300 °CRoom temp. +5 - 300 °CTimer Display7 segment LED7 segment LEDLCDLCDTime Setting Range1 - 144000 min1 - 144000 min1 - 142560 min1 - 142560 minInner Chamber (WxDxH)550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mmTotal Volume Inner Chamber125 L125 L125 L125 LExternal Dimensions (WxHxD)700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mmRS 232 InterfaceNoNoYesYesUSB InterfaceYesYesYesYesVoltage220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V.comparison-table tr td:nth-child(5) { background-color: #fffacd; } Request a Formal Quote

Edwards T-Station 85H Wet Turbo Station - CF63 200-240V Ultimate Pressure <5 x 10-9 mbar Inlet Co (more)nnection DN 63 CF Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application nEXT T-StationThe Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All the nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of the active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 85The T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines an nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1.INCLUDED: The Edwards T-Station 85H Wet Turbo Station - CF63 200-240V includes: - Power Cord - One Year Manufacturer's Warranty