Hermle Z 36 HK Refrigerated Centrifuge

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOL (more)LOW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Jouan M22i refrigerated centrifuge with Jouan 5000rpm rotor This item was removed from a university  (more)where it was surplus to requirement. It is in good cosmetic condition and powers on, however, we are unable to test it further as there's an error with the door lock sensor that prevents any use. Also, the screen visibility is poor, therefore it is listed as Spares/Repair. Includes: Jouan four bucket rotor SWM180.5Max 5000 rpmLoad charge 2.000kg

This Sanyo MSE Mistral 2000R Refrigerated Benchtop Centrifuge was removed from a university lab wher (more)e it was surplus to requirements. The unit has been tested and is in working order. The RPM could be set up to 6500 but the rotor would only run up to 4500rpm. It was tested with a digital thermometer (not included).When the temperature was set to 4˚c, the thermometer read 5˚cWhen the temperature was set to -4˚c (minimum) the thermometer read -5˚c There is a Rotor inside with 4 x Buckets and 2 x Yellow 50ml Adaptors. It is in reasonably good cosmetic condition but has some minor marks from use.

SCILOGEX SCI406 LCD Digital Clinical Centrifuge, with rotor 19100197; 6 x 15ml and 6 x 50ml capacity (more)The SCI406 Clinical Centrifuge is ideal for the separation of serum, plasma, urea, blood samples, PRP, PRF and routine applications in hospital and research laboratories. The SCI0406 conforms to international safety standards and regulations. SCILOGEX clinical centrifuges are certified with CE, cTUVus and FCC. MCA test according to IEC/EN61010-2-20. Passed EN61010-2-101:2002 requirements for invitro diagnostic (IVD) medical equipment. SCILOGEX SCI406 clinical centrifuges support small volumes applications. The centrifuges are supplied with an angle rotor that can hold up to 6x50mL or 6x15mL centrifuge tubes. They are widely used in medical and veterinary practices for the centrifugation of blood and urine samples in qualitative analysis of water and soil samples. These centrifuges are also used in universities and other research institutes.Product Features - 6 x 50mL / 6 x 15mL / 2 x 50mL + 2 x 15mL rotor included - Rotor speed can be set and displayed in RPM or G-force - Operation can be timed from 30 seconds to 99 minutes or continuous running - Timer commences once the set speed is reached, so the separation time is more accurate - Gentle braking at low speeds with efficient separation - Quick spins are possible by pressing and holding PULSE key - Lid with electric lock and automatic release function saves processing time and prevents samples overheating - Easy operation with intuitive menu and easy-to-read backlit LCD processing display and sound alert - High strength composite rotor and excellent balance technology for quiet and stable operation - Maintenance-free brushless DC motor - Automatic self-diagnosis on startup showing accumulative running time and last running parameters Click Here to View Product Video INCLUDED: The SCILOGEX SCI406 LCD Digital Clinical Centrifuge, with rotor 19100197; 6 x 15ml and 6 x 50ml capacity includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a Labcold RSBT1056MD Blood Bank RefrigeratorLabcold Keypad Electronic lockStainl (more)ess steelLabcold Alarm and Control SystemAdjustable shelvesDual temperature display with load simulatorBlood audit interfaceCore temperature alarmRegistered medical Device in accordance with UK MDR 2002, and is compliant with BS4376: Part 1:1991This cabinet has a top mounted instrument panel, for convenience and ease of use.Adjustable shelves with clear inner doors ensure stable storage temperatures during door openings, whilst allowing rapid checking of stocks.All have the unique Labcold Keypad Electronic Lock, which allows only authorised persons to access the contents by entering 4-digit code.LABCOLD’S UNIQUE ALARM AND CONTROL SYSTEM provides a constant check of all important performance parameters with clear symbol displays of alarm status.A touch panel display constantly shows both chamber and liquid load simulator temperatures.A mutable, audible alarm is standard and remote alarm contacts are provided to integrate with compatible external systems.ConfigurationFree StandingCapacity (Litres)118Capacity (Bags)56Height x Width x Depth1045mm x 655mm x 670mmWeight77kgShelves2Temperature Range+2ºC to +8ºCDoor TypeSolidLock TypeDigital

Leybold Vakuum GMBH Trivac 016B Pump This item was removed from a university lab where it was surplu (more)s to requirement. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

Ohaus ISTHBLHTS Heated Thermal Shaker The Ohaus ISTHBLHTS Thermal Shakers is designed for applicati (more)ons that require consistent and precise results. With heating and shaking capabilities. These shakers use interchangeable blocks to accommodate a wide variety of tubes and microplates. The easy-to-use, 4.3", color, LCD touch screen allows the user to save and visibly track progress through the live status bar for five user defined programs, each with five individual steps. The unit's enhanced electronics and dual temperature sensors provide accurate, dependable temperature settings across the operating range with a temperature accuracy of ± 0.5° C between 20° C and 45° C; ± 2° C below 20° C and above 45° C. The ISTHBLHTS is designed for applications that require consistent and precise high-speed shaking with temperature control to 100° C. With heating and shaking capabilities, our shakers use interchangeable blocks to accommodate tubes and microplates. Intuitive LCD touchscreen allows the user to save and track progress of 5 user-defined programs, each with 5 individual steps. Enhanced electronics provide dependable temp. settings across the operating range. Program control capabilities allow user programmable operation for automated use and memory. Storage for five separate, 5-step programs, or unlimited if using the USB. Enhanced electronics provide accurate and dependable temperature settings across the operating range. The USB port allows for easily transferring test data to a flash drive for data logging and storage. Also ideal for program storage and performing software updates.Click Here to View Product Video INCLUDED: The Ohaus ISTHBLHTS Heated Thermal Shaker includes: - 1.5mL Block - Clear Rack - Cover - Hex Head Screwdriver - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISTHBLHTS Heated Thermal Shaker Specifications Temperature Range4° C above ambient to 100° CTemperature Accuracy± 1° C between 20° C and 45° C± 2° C above 45° CSpeed Range300 to 3000 rpmSpeed Accuracy± 2%Timer1 minute to 99 hours, 59 minutesOrbit3 mm (0.12")Cooling Rateabove ambient 2-3° C/min; below ambient 0.5-1.0° C/minHeating Rate5° C/minOverall Dimensions (L x W x H)10.25 x 9.75 x 5.2" (26 x 24.8 x 13.2 cm)Ship Weight11.9 lbs (5.4 kg)Request a Formal Quote