Hermle SIEVA-3 Filtration Centrifuge

This was removed from a university lab where it was surplus to requirements THe unit powers up but s (more)hows error 48 which is a door lock error. It seems like the door solenoid is not being sent a signal. It is sold for spares/repairs. No rotor included.

This Carl Padberg Zentrifugenbau LE was removed from a university lab where it was surplus to requir (more)ements. The cosmetic condition of this item is fairly good and it has powered on. We set the unit to 20,000rpm. It does ramp up quite slowly to speed. It reached 21,000+ and started to hold speed. We're not sure how accurate the speed adjustment is. It didn't seem to fully hold at 20,000rpm, it kept slowly rising. The belt looks like it needs replacing too. For this reason, It is sold for spare/repairs The speed range is from 15000 to 40000 rpm. Additionally included: 1x New Brunswick Scientific power supply switching/speed selection unit 1x Huber and Moser motor

Jouan CR4-22 Benchtop Refrigerated Centrifuge With Swinging Bucket Rotor This item was removed from  (more)a university lab where it was surplus to requirements. The centrifuge powers on and is in fair cosmetic condition. The rotor did not reach the maximum RPM of 4750, stalling at 4100 RPM. It has been temperature tested. (Thermometer not included.) Due to the inability of reaching its max RPM, this centrifuge is listed as Spares/Repair. Includes: - Jouan bucket rotor - 4 x 85220020 buckets - 4 x swinging plates - 4 x bucket inserts for 50ml tubes - 4 x bucket inserts for 25ml tubes

Labconco 7548500 PTFE-Coated Microcentrifuge Tube Rotor PTFE-Coated Aluminum Rotor for CentriVap mic (more)ro IR. Holds 24 1.5ml microcentrifuge tubes. INCLUDED: The Labconco 7548500 PTFE-Coated Microcentrifuge Tube Rotor includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Beckman Coulter Optima L-90K Ultracentrifuge This was removed from a university lab where it was sur (more)plus to requirements. The unit has been professionally serviced and is in good working order. A full report is available on request. It is in good cosmetic condition with minor marks.

This listing is for a Analytical 200g Weight. The unit is in full working condition and is ready fo (more)r immediate release. Analytical Weight Set is a set of weights used in laboratory balances and scales for precise measurements

Polyscience MX-CA11B MX Immersion Circulator (Maximum Temperature: 135C), 120V, 60Hz3D Visualization (more) of the Polyscience Immersion CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block iframe{height:315px !important;} The Polyscience MX-CA11B MX Immersion Circulator (Maximum Temperature: 135C), 120V, 60Hz is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Features Large, universal icon and English display On-screen prompts Single-point calibration capability For laboratory use only Suitable for tank capacities up to 28 liters Click Here to View Product Video INCLUDED: The Polyscience MX-CA11B MX Immersion Circulator (Maximum Temperature: 135C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus multi-tube vortex shakers These vortexes are ideal for processing a large amount of samples at (more) the same time. They consist of interchangeable foam racks for mixing tubes with a diameter of 10 to 29 mm. Feet with powerful suction cups reduce movement and prevent the device from slipping on the work surface, for safe operation in your laboratory. High speed and small orbit make these mixers perfect for mixing microplates effectively. All models are designed for continuous laboratory operation. Analog models: economical alternative for simple mixing; controls: knob adjustment. Digital models: timer and exact speed control for applications requiring repeatable results; controls: Touch / Standby / On switch; LED display for speed and time, buttons for adjusting default values. Single or double holders for microplates are available as accessories. - Easily process up to 50 samples simultaneously - Custom multi-tube mixer with six different tube racks and an extension kit - Easy-to-clean monobloc stainless steel chassis, perfect for a variety of environments, especially cleanrooms - For demanding samples, mixing can be improved by making it more vigorous thanks to the programmable pulse mode (digital models only). In addition, it is possible to adjust the interval of the pulse times and customize its operation The product includes: Foam rack for 12 mm tubes (code 30400239) Applications High throughput suspensions, genotyping, DNA and RNA testing in clinical laboratories Display Independent LED displays with speed and time information allow the operator to view both settings simultaneously (digital models) Operation Detachable three-wire cable and plug (included) Structure Foam and stainless steel rack for (50) 12mm diameter tubes (included). Interchangeable with foam rack for mixing tubes with diameter from 10 to 29mm

A laboratory oven with an exceptional quality/price ratio! 100% Made in Italy and with all accessori (more)es already included as standard.Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 300°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory Oven STF-N 52 FALC Natural Convection

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW