Heraeus Sorvall 75006444 5650rpm 2x500g Swinging Bucket Centrifuge Rotor Lab

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-37170 Brady BP-1344 ITEM-37171 Grant Water BathITEM-37172 Electrothermal Heating Mantle ITEM-37173 Boc Regulators ITEM-41531 2 x Pneuchange units ITEM-41532 Grant Water BathITEM-41533 Cylinder change over unitITEM-41534 Grant Water BathITEM-41535 Grant Bio PV-1 ITEM-41536 Corning PH Meter 240 ITEM-41537 Fisherbrand Hydrus 500 ITEM-41538 Optoma Projector ITEM-41539 Stuart SB162ITEM-41540 Stuart CB161 ITEM-41541 Mettler AJ50 ITEM-41542 Box of pipettes ITEM-41543 UVP Transilluminator ITEM-41544 Light box ITEM-41545 PumpITEM-41546 Thermo Espresso Centrifuge ITEM-41547 Sanyo Micro Centaur ITEM-41548 Sauter Scales ITEM-41549 2 x Micro centaurs ITEM-26100 Grant Bio Mini Shaker PMS-1000iITEM-26104 Eppendorf 5415 D ITEM-26106 WhirliMixer ITEM-11686 AdvanSys ASB 3940UA Ultra SCSI Storage Controller IT Equipment ITEM-26094 Freezer racking ITEM-26103 Pharmacia Biotech Electrophoresis Power SupplyITEM-30161 Harvard 6012 stimulator ITEM-26027 CORIOscan Connect +ITEM-26099 Freezer rack sample holders ITEM-30113 Needles, mixed makes/typesITEM-26102 APC Smart-UPS 100 ITEM-26101 Lucent Technologies RM200 Power Supply ITEM-27923 Vickers Instruments Microscope ITEM-27922 Vickers Instruments MicroscopeITEM-27921 Vickers Instruments Microscope ITEM-26107 accujet ProITEM-27919 Vickers Instruments Microscope ITEM-27920 Vickers Instruments Microscope ITEM-27918 Vickers Instruments MicroscopeITEM-27917 Vickers Instruments MicroscopeITEM-27915 Vickers Instruments MicroscopeITEM-27916 Vickers Instruments Microscope ITEM-27914 Vickers Instruments MIO A MicroscopeITEM-27906 Vickers Instruments MicroscopeITEM-26108 MicrocentrifugeITEM-26097 Bio Rad Trans-Blot SD CellITEM-26096 Techne MCS-104S

Lot Of Heraeus Centrifugal Rotor Buckets And Tube Holder Bucket Inserts Lab These items were removed (more) from a university lab where they were surplus to requirement. All items are in good cosmetic condition but have not been tested. The items included are as follows: - 4 x Heraeus #7570 E Rotor Buckets (max capacity of 600g) - 3 x Heraeus #8030 Rotor Buckets (max capacity of 510g) - 3 x Tube Holders For 15-25ml Tubes - 4 x Tube Holders 50ml Tubes

VWR Galaxy Miniarray minicentrifuge. Speed of 4,000 rpm. Capacity for 2 microarray slides. Specifica (more)tions: 230 V; 50-60 Hz

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Hermle Z496-1000-AC - 4 x 1000ml Swing-out Rotor without Buckets for Z496-K The Hermle Z496-1000-AC  (more)is a 4 x 1000ml swing-out rotor designed for use with the Hermle Z496 series of centrifuges. With a maximum speed of 4,600 RPM and a maximum RCF of 5,203 x g, this rotor is capable of effectively separating samples in a range of applications. The rotor has a large maximum capacity of 4 x 1000ml, making it ideal for processing multiple samples simultaneously. It should be noted that this rotor does not come with buckets, so they must be purchased separately. Overall, the Hermle Z496-1000-AC rotor is a reliable and efficient tool for high-capacity centrifugation in a variety of laboratory settings. INCLUDED: The Hermle Z496-1000-AC - 4 x 1000ml Swing-out Rotor without Buckets for Z496-K includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle 4 x 100H Swing Out Rotor with Buckets The Hermle 4 x 100H Swing Out Rotor with Buckets is a c (more)ompatible accessory for Hermle Z32-HK, Z307, and Z327 series centrifuges. It has a maximum speed of 5,000 RPM and can generate a maximum relative centrifugal force (RCF) of 4,080 x g. The rotor can accommodate a maximum capacity of 4 x 100ml, making it a suitable option for moderate sample volumes in research and clinical laboratories. Its swing-out design allows for easy sample loading and unloading, while its reliable and efficient performance ensures accurate results. INCLUDED: The Hermle 4 x 100H Swing Out Rotor with Buckets includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Grant JB Aqua 18 Plus Water Bath Lab This item was removed from a university where it was surplus to (more) requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition, however the handle has snapped off, this does not affect its functionality.

Integra Cellspin Cell Control Stirrer Four-Platform System This was removed from a lab where it was  (more)surplus to requirements. The unit has been tested by a service engineer and is in full recertified working order. This listing consists of: 1 x Integra Cellspin Controller.4 x Integra Cellspin Platforms.3 x 186050 2m Control Cables.1 x 186238 Controller PSU. This system will allow you to run either 1 or 2 x Platforms at once. Only one controller cable is needed for this setup. The system includes 2 x spare platforms and 2 x spare control cables. Another controller could be purchased from the distributor to allow for 2 complete 2 platform systems. We can quote for an extra brand-new controller if required. The platforms have all had brand-new belts fitted and have been rpm-tested through the range. Note that these platforms require spinner flasks to operate correctly. These can be purchased separately from the distributor. We can also quote for these flasks if required.

Fast and Stable Measurement It only takes a second for the balance to display the final measurement  (more)result. Weighing Heavy Loads with High Accuracy On the large weighing pan of a PM balance, you can weigh a load of 120 kg with a readability of 0.2 g and second-to-none repeatability. Minimum Eccentricity Error Over the Entire Range PM balances can be used to determine the mass of irregularly shaped components with a centre of gravity that is significantly shifted from the weighing pan axis. Parameter Stability Over Time and After Transport The mechanical design is resistant and robust, allowing you to maintain the correct metrological parameters after transport and despite long and intensive use. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.01 g on the 200 x 185 mm weighing pan and with a readability of 0.2 g on the 500 x 400 mm weighing pan. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails New, lmproved The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. 5Y Terminal With Terminal 5Y you get a 10-inch display, Digital Weighing Auditor, multi-step user verification, ambient light alerts, hotspot, RFID*, live note voice and text notes, voice commands for the balance and handy measurement history within the handy library widgets Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring. * RFID ISO/IEC 14443 Type A, 13,56 MHz

We provide you with three models of platforms in plastic casing: with readability [d] of 0.5 g, 1 g  (more)and 2 g and a maximum capacity [Max] of 0.6/ 1.5 kg, 1.5/3 kg and 3/6 kg. Each model has a weighing pan dimensions of 195 x 195 mm. Use the potential Our platforms can work with one of six weighing terminals to choose from: PUE CY10, PUE C32, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. Power of steel The use of stainless steel for the weighing pan guarantees you a long life for the platform. Fearless of its contact with moist objects or accidental splashing. The housing is made of ABS plastic.