Eppendorf 5920R Refrigerated Centrifuge w/ S-4x1000 Rotor

Sorvall Legend T Benchtop Centrifuge with 4600rpm Rotor This was removed from a university lab where (more) it was surplus to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition with marks from use. Included are; 1x Sorvall RotorP/N: 75006445S/N: 002518 4x Sorvall swinging bucket Heraeus AdaptorsP/N: 75006449

Jouan Refrigerated Centrifuge  Model - CR412 with 4750RPM Rotor & Inserts Lab This item was (more) removed from a university where it was surplus to requirement. It is in good cosmetic condition and powers on, however, when powered on the display reads '0000' and no controls are operable, thus preventing any testing from being conducted. Therefore, this item is sold as Spares/Repair.

This item has just arrived in our stock. Please enquire for further details.

Max speed: 6000 rpm Max RCF: 2000 x g Max capacity: 6 x 1.5/2ml Dimensions: (WxHxD): 153 x 128 x 109 (more) mm Weight: 730g

HETTICH MIKRO 220 centrifuge. Rotor with adapters for 15 ml falcon tubes. 12X35G Speed ​​6,000 rpm.  (more)Temperature control. RunSilent™ silencing system (≤ 65 dB). Cover with safety lock. Robust and stable. Includes manual. Rotor supports up to 60 2.0/1.5ml tubes per cycle. Maximum speed: 18,000 rpm. Density 1.2 kg/dm3.

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-41029 Box of glass test tubesITEM-24612 Boxed BOC Lab Series 8500 Multi Stage Co2 RegulatorITEM-41030 10 X Boxes 5ml reaction vesselsITEM-24613 Electrophoresis X cell sure lock casingITEM-24605 NTC Oxygen RegulatorITEM-24607 NTC Oxygen RegulatorITEM-24608 BOC Special Gases RegulatorITEM-24606 NTC Oxygen RegulatorITEM-24604 BOC Multi stage regulatorITEM-24609 GA SSO4 Oxygen RegulatorITEM-24610 GA SSO4 Oxygen RegulatorITEM-24614 Vollrath Water BathITEM-41511 Electrophoresis tanksITEM-24583 Box of RegulatorsITEM-24611 Bibby Hotplate StirrerITEM-24584 Box of regulatorsITEM-41512 Sala PulleyITEM-41513 FLEXILUX 300 & 600 Longlife unitsITEM-24587 MSE Micro Centaur PlusITEM-41514 IKA Vibramax VXRITEM-41515 IKA VIBRAMAX VXR BASICITEM-24585 MVD CCD video cameraITEM-41516 Box of electrophoresis tanksITEM-24586 Sanyo Digital CCD cameraITEM-41517 LKB 2197 Power supplyITEM-41518 Techne DB3ITEM-21720 Airflow TA 2 Anemometer ( in case)ITEM-21722 Edwards Pirani 11 GaugeITEM-21729 Edwards Monitorr 101 Edwards Penning 8ITEM-21731 New Brunswick Co2 LN2 Back up ModuleITEM-21718 BOC Nitrogen 300 bar InletITEM-21725 Genevac Pirani GaugeITEM-21728 WPI Nanoliter GaugeITEM-21724 Edwards Pirani 11 GaugeITEM-21733 Chell PDR-D-1 Pressure ReadoutITEM-21714 Freshford 230 bar inletITEM-21727 SGT Charcoal FilterITEM-21716 Boc HiQ InletITEM-21715 Freshford 300 bar inletITEM-41519 Grant Water BathITEM-41520 B&T Heater StirrerITEM-37162 Grant Water BathITEM-37163 ISOTECH IGC2231ITEM-21734 8x Mass Flow ControllersITEM-37164 Box of electrophoresisITEM-21732 Peak Scientific 12x SolenoidsITEM-37166 Prior microscopeITEM-37167 Nikon MicroscopeITEM-37168 Olympus MicroscopeITEM-37169 Electrophoresis Hood

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

M1 Mass Standard - knob weights - set (1 mg - 500 g), wooden box.

A stent is a type of prosthesis that is placed inside a blood vessel to restore its patency. Stent D (more)ozens of lives are saved thanks to it. Its shape, size, and weight must be matched to the blood vessel. In addition, the stent application site requires attention to sterility. These properties necessitate the use of balances with the highest resolution for the inspection of stents. The stent weighing kit has been designed to ensure that such a delicate sample, a stent, is weighed with the greatest precision possible, yet in an easy and ergonomic manner. The said precision is obtained thanks to the XA 5Y.M.A.S. microbalances, and ergonomics due to the specially designed weighing pan and additional draft shields. The weighing pans that are part of the kit allow for weighing stents of different sizes, including 5.5 × 140 mm, 6 × 60 mm, 8 × 40 mm, 8 × 40 mm, 19 × 10 mm, and 1.6 × 19 mm. Thanks to the well-thought-out design of the kit and its applicators, the user places the stent on a special tray, which increases ergonomics and eliminates cross-contamination. The stent weighing kit includes 7 items: draft shield base, 2 draft shields, 2 fork-shaped stent weighing pans: for small (1) and large (1) stents, 2 stent applicators: for small (1) and large (1) stents. Due to the different shapes and sizes of stents, two types of weighing pans, dedicated covers, and size-appropriate applicators come standard with the kit. The RADWAG-manufactured microbalance is a versatile solution. Therefore, it can be operated by a right- or left-handed person. The overall design of the kit, i.e. a fork-shaped weighing pan with an additional draft shield, has eliminated the difficulties associated with weighing of a small-weight sample of a relatively large volume such as stent. With this, the stent weighing results are obtained with an accuracy equal to that of the balance. The kit is intended for all load capacities of the XA 5Y.M.A.S. series balances.

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.

ZWIEBEL calibration weight 10g class M1 INOX Stainless steel laboratory calibration weight Brand: ZW (more)IEBEL Weight: 10 g Type / class: M1 maximum permissible error: ± 2mg LZ 67 Weight checked on a precision balance at 0.01g (10mg) - see photo In its plastic box uncalibrated weight