Eppendorf 5804 Benchtop Centrifuge Zentrifuge S-4-72 Rotor 50ml Conical Tube Adapter

This Jouan B4i Benchtop Centrifuge was removed from a university lab where it was surplus to require (more)ments. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. This item includes the following rotor: Thermo Jouan High Throughput Swing-Out Rotor Model S40Max Load 2.00kgMax speed 4300 (rpm) This item ran at 4000rpm with S40 Rotor fitted.As stated in the manual, the maximum speed for a swing-out rotor on this unit is 4000 rpm.

Sorvall Legend T Benchtop Centrifuge with 4600rpm Rotor This was removed from a university lab where (more) it was surplus to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition with marks from use. Included are; 1x Sorvall RotorP/N: 75006445S/N: 002518 4x Sorvall swinging bucket Heraeus AdaptorsP/N: 75006449

Benchtop centrifuge large capacity Digtor 22. Capacity max. 4 x 750 mL. Speed max. 21.948 xg/14.300  (more)rpm. Rotors angular and oscillating to process tubes from 0.2 ml to 750 mL. LED display indicator rpm/rcf and time. Programming speed in steps of 10 rpm/10 xg. Account the back/increasing from 0 or set rpm/rcf. Watch 1 to 99 min in intervals of 1 sec, and the time indefinite. Control of acceleration/braking progressive. Mensajesdel state of the computer. Control by microcesador. PC connection. Free engine maintenance. Rotors in memory. Automatic locking and emergency. Safety stop for imbalance, an indicator of vessel where it occurs. Level noise <60 dB. Forced ventilation:it reduces the temperature increase. Rotor not included, view available on description.

Benchtop centrifuge Ortoalresa Consul 22. Maximum capacity 4 x 400 mL. Max. 14.300 rpm/21.948 xg. TF (more)T colour touch screen, Indicator of rpm and rcf, time, acceleration/braking, imbalance, programmable speed 10 rpm/10 xg, countdown/increasing clock-programmable intervals from 1 sec to 99 hr and indefinite period of time. Acceleration and braking controllable, 40 memories. Noise level <60 dB. Engine maintenance free. Rotor not included, view available on description or attached file.

Hitech Instruments 310 Gas Monitor, SB100 Audio/Visual Alarm &amp; 806-117 Sensor These units were r (more)emoved from a university lab where they were surplus to requirements. All the units power up but have not been tested further. Included are; 1 x Hitech Instruments 310 Gas Monitor 1 x SB100 Audio/Visual Alarm 1 x Remote Gas Sensor806-1177 The job no. for all&nbsp;of the units is - S01-0048

This Agilent Technologies 3100 Offgel Fractionator &nbsp;Model: G3100A was removed from a university (more) lab where it was surplus to requirements. The item is in good cosmetic condition. There are some scratches and stains, primarily along the lid and minor marks/scratches on the surface. The item powered on without issue. We were able to use the controller to access the settings for the different trays. When the trays activated they lit up to indicate they were functioning. The item also comes with the following:1x Agilent Fractionator ControllerModel: G3101A 1x Kingston Technology 1GB Compact Flash

Applied Biosciences 7900 HT Fast Real-Time PCR Complete System This was removed from a university l (more)ab where it was surplus to requirements. We were able to get the unit to communicate with the PC but we were unable to get it to run cycles due to a serial number conflict. We were able to open the door but not close it again. Included with it are; 1 x DELL PCWindows Vista Business 1 x SDS 2.3Item is in a good used condition. The Item powered on and working, but not connecting to PCR Tester 1 x Bti PRGF Desktop CentrifugeIt is in good used condition. The item powered on and was tested, all working 4 x PGRF CF10142 LOT 2894 1 x Diagnostica Stago PrinterItem powered on and tested, all working 1 x Datalogic QS6000 Plus Barcode ReaderThe item powered on and was tested, all working Associated books and a spare Block Assembly.

Odessy LI-COR Unit Model-9120 Lab This item was removed from a university where it was surplus to re (more)quirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility as it requires software. Software not included.

This Zeiss Axiophot Microscope w/ 5 x Zeiss Plan-NEOFLUAR Objectives was removed from a university l (more)ab where it was surplus to requirements. The unit is in good used cosmetic condition but it does have various marks and signs of general use. The microscope has been professionally serviced and is in full working order. The report is available on request. The fluorescence bulb was removed due to unknown lifespan. The system consists of: 1 x Zeiss Axiophot Microscope body.2 x Zeiss 45 60 70 03 Cameras.1 x Zeiss 44 64 21 3FL Fluorescence Cube Slider.1 x Zeiss 45 36 70 Ph Slider.1 x Zeiss 45 35 02 Mechanical Stage.1 x Zeiss 44 53 67 + 44 53 25 Condensor.1 x Zeiss 44 72 16 Lamp With 1 x Zeiss 39 26 42 Power Supply (Showing 06254.34 Run Hours).1 x Zeiss 44 72 17 Lamp. It also has 5 x Objectives: 1 x ZEISSPlan-NEOFLUAR63x/1,25 Oil44 04 61Ph3∞/0,17 1 x ZEISS WEST GERMANYPlan-NEOFLUAR40x/0,7544 03 51Ph2∞/0,17 1 x ZEISS WEST GERMANYPlan-NEOFLUAR20x/0,5044 03 41Ph2∞/0,17 1 x ZEISS WEST GERMANYPlan-NEOFLUAR10x/0,3044 03 31Ph1∞/0,17 1 x ZEISS WEST GERMANYPlan-NEOFLUAR5x/0,1544 03 20∞/0,17 And 2 x Zeiss Pl 10x/25 Eyepieces.

CY10 scale&rsquo;s multi functions The CY10 series multifuncional scale is designed for fast, accura (more)te and repeatable weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 multifuncional scale: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance&rsquo;s memory &ndash; either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Multifunctional scale, including labelling scale If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series multifuncional scale can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz