Eppendorf 5702R Refrigerated Centrifuge w/ A-4-38 Rotor

This Heraeus Biofuge 13 Centrifuge was removed from a university lab where it was surplus to require (more)ments. The unit powers on and runs smoothly up to 13,000rpm. It is in reasonably good cosmetic condition but is marked from use. We are unable to test this item further at our facility. 18 sample holders.

Hermle Z287-A Compact Universal Centrifuge The Z287-A exceeds the limitations set forth by tradition (more)al microcentrifuges which are restricted solely to fixed angle rotors for microtubes. Instead, this compact, next generation model features an expansive line of swing out and fixed angle rotors options that accept microplates and test-tubes up to 50ml. We’ve designed this centrifuge to be our most compact and economical. A true workhorse for any lab requiring a centrifuge that can accommodate many fields of research. Along with a broad range of available rotor options, the Z287-A introduces a convenient status indicator. Users can easily view the current state of the centrifuge from across the room. The LED illuminates to signify if the rotor is spinning, the run is completed or the centrifuge is idle in standby mode. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the EZ-Scroll touch wheel front panel can adjust accel/decel rates, and change the end of run alarm tone. Additionally this feature prevents debris buildup, leakage, and can be operated with gloves on. The Z287-A is a truly powerful and versatile centrifuge perfect for any research laboratory. INCLUDED: The Hermle Z287-A Compact Universal Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Eppendorf 5702R Centrifuge 230V with A-4-38 Rotor Max. Speed 4,400 RPM Max. Capacity 4 x 100ml Max. (more) RCF 3,000 x g Features - Holds up to 4 x 100 ml samples for versatile lab applications - Temperature control range from -9°C to +40°C, suitable for temperature-sensitive samples - Compact design with a 20.7-inch height (lid open) for under-shelf placement - Quiet operation minimizes noise in lab environments - Timer range from 1 to 99 minutes with continuous run option - FastTemp for rapid pre-cooling and continuous cooling when idle - ECO switch-off activates after 8 hours of inactivity to conserve energy - Two program keys allow quick access to frequently used settings - Supports a maximum speed of 4,400 RPM and 3,000 x g (RCF) for efficient sample processing The Eppendorf 5702R centrifuge has a maximum speed of 4,400 rotations per minute, and a maximum g-force of 3,000 x g (RCF). The Eppendorf 5702R has a maximum capacity of 4 x 100ml samples and a timer with a time range between 1 and 99 minutes, with a continuous setting as well. Temperatures from -9C to +40C. With a relatively small footprint, the Eppendorf 5702R benchtop centrifuge can be used in a variety of applications without taking up valuable countertop real estate. The 5702R has a total weight of only 84 pounds, and a maximum height (lid open) of 20.7 inches, making it perfect for under the shelf usage. The 5702R can be used in a range of settings, from clinical to cell culture labs. The Eppendorf 5702R Centrifuge 230V is new in the box INCLUDED: TheEppendorf 5702R Centrifuge 230V w/ A-4-38 Rotor Rotor includes: - A-4-38 Swing Bucket Rotor with Buckets - 1 Set of 4 x 10ml Vacutainer Adapters - 1 Set of 2 x 15ml Adapters - Power Cord - Full 6 Month Parts and Labor Warranty Eppendorf 5702R Centrifuge 230V with A-4-38 Rotor SpecificationsMaximum Speed4,400 RPMMaximum g-Force3,000 x g (RCF)Maximum Capacity4 x 100 mlTimer1 – 99 minutes continuousHeight with lid open20.7 inchesTemperature Control-9C to +40C

Centrifuge FC5513-K, Frontier™ 5000 Ohaus, with rotor Designed to be comfortable and practical, Fron (more)tier Micro centrifuges feature an intuitive control interface that is easy to operate even when wearing gloves. Micro centrifuges save valuable bench space by integrating all of their functionality into a small footprint. Frontier Micro centrifuges offer high-speed operation for a range of essential laboratory applications, such as DNA/RNA preparation, ultrafiltration and more. Additionally, biocontainment rotors allow for research with hazardous samples. The equipment is completed by a silent brushless motor, high sample productivity, multi-safety control, customized programs. Included in the FC5513-K model you will get the angle rotor with maximum capacity of 24 x 1.5 / 2.0ml. Features: Maximum relative centrifugal force (x g) at 17,317 g; maximum speed 13,500 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 85 mm; 45° angle. You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. ELEGANT AND PRACTICAL DESIGN - Simple and modern interface, to set parameters easily - The display shows both the set and real parameters - Clear and right display STRUCTURE AND FUNCTIONALITY - The panel is splash proof to protect the centrifuge from accidental sample spills - The maintenance-free induction motor produces G-force max. of 17317×g - Speed ​​up to 13500 rpm in less than 15 seconds (with microtubes) - 10 acceleration/deceleration settings - 99 memory sets for quick storage and easy recall of used parameters - Rotor imbalance detection systems shut down the unit when loads are out of balance TECHNICAL FEATURES Speed ​​range: 200 rpm - 13,500 rpm Maximum relative centrifugal force: 17,317 g Maximum flow rate (rotor): 24 x 1.5 / 2.0ml Program memories: 99 Rotor Packaging: Angled Rotor: 24 x 1.5 / 2.0ml Acceleration gear: 10 Deceleration gear: 10 Lid lock: mechanical Noise level: ≤60 ± 2 dB (A) Pre-refrigeration time: not applicable Rotor Compatibility: Angled 24 x 1.5ml / 2.0ml; angled 24 x 1.5ml / 2.0ml sealable; Hematocrit rotor, 24 x capillaries; corner 18x2ml spin columns Rotor recognition method: manual Execution time: quick rotation; 10 seconds to 99 hours 59 minutes 59 seconds; Continuous Safety certification: CE; FCC

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Bio-Rad Dyad Disciple Peltier Thermal Cycler PTC0221 2-48 Well & 96 Well Block This was removed  (more)from a university lab where it was surplus to requirements. The unit powers up but we were unable to test it without the control unit. Bio-Rad Dyad Disciple Peltier Thermal CyclerModel - PTC0221SN - DY005562 2-48 Well Alpha Unit Block AssemblySN - AL037212 96 Well Alpha Unit Block Assembly (ALP2296)SN - AL110470 Holds 0.2ml vials

IKA ROTAVISC SBS hi-vi II Complete Viscosity Measuring Range 100 to 40,000,000 mPas Viscosity Accura (more)cy (FSR) ± 1% Speed Range 0.01 to 200 rpm Features - Equipped with robust steel ball bearing technology for high durability and performance - Designed for applications with high sample throughput, frequent spindle changes, and harsh environments - Offers a viscosity measuring range from 100 to 40,000,000 mPas, suitable for both Newtonian and non-Newtonian liquids - Delivers precise results with a viscosity accuracy of ±1% and a repeatability of ±0.2% - Features a 4.3" TFT display with intuitive menu navigation for easy operation - Includes digital leveling support for correct setup and simple ramp function for recurring tasks - Infinitely variable speed control from 0.01 to 200 rpm with ±0.01 rpm setting accuracy - Supports both continuous and timer-based operation modes The SBS (Steel Ball Bearing, Suspended) rotational viscometers extend the application spectrum of the IKA ROTAVISC family by incorporating robust ball bearing technology, making them ideal for high sample throughput, frequent spindle changes, and harsh environments. These viscometers offer fast and accurate results for both simple and demanding viscosity measurements. They feature a 4.3" TFT display with intuitive menu navigation, digital leveling for correct setup, and a simple ramp function for recurring tasks. With an accuracy of ±1% and a reproducibility of ±0.2%, ROTAVISC ensures precise measurements for Newtonian and non-Newtonian liquids. The speed can be adjusted steplessly or through specified programs, with a viscosity measuring range from 800 to 320,000,000 mPas.INCLUDED: The IKA ROTAVISC SBS me-vi I Complete includes: - Power Cord - Two Year Manufacturer's Warranty

AUTOSTILL Auto Four WS SYSTEM JENCONS distillation unit With glassware Equipment for parts

High precision measurements The 20 kg class E2 mass standard is a precision metrology tool, ideal fo (more)r calibrating high-precision balances used in metrology, pharmaceutical, chemical laboratories and other research and industrial institutions. Product Features The ergonomic, cylindrical shape ensures ease of use and precise placement of the standard on the weighing platforms. Made from the best materials, it guarantees stability and resistance to changes in environmental conditions.

The mass standard is the foundation of accurate mass measurement, as it affects the quality and reli (more)ability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Varied Standards: The set consists of 12 flat polygonal sheets and 8 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 pairs of tweezers, 1 brush and 1 pair of gloves, facilitating precise and safe cleaning and handling of the standards. Plastic Packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. *The mg unit mass standards are flat polygonal sheets. **The 1 mg, 2 mg and 5 mg mass standards are made of aluminum.