Eppendorf 5702 Centrifuge

This Jouan BR3.11 Refrigerated Benchtop Centrifuge was removed from a university lab where it was su (more)rplus to requirements The unit powers up and is in good working order, but the lid has to be opened manually. The automatic switch is broken It is in good cosmetic condition with minor marks. Rotor Arm:Max Load 2.8kgMax RPM 5150 Buckets x 2:Dimensions L5.5cm x W5.5cm x H9.5cm Rotor:Part No. 8036 HoleDimensions L2cm x W2cm x H4cm

MSE Mistral 3000i Benchtop Centrifuge This was removed from a university lab where it was surplus to (more) requirements. Although the unit is in good cosmetic condition and powers on, it is unable to run a cycle or reduce temperature. Additionally included: 1 x MSE RotorModel BS4402 7 x Swinging Buckets:Volume: 250ml Bucket Adaptors: 6 x BlueHolds: 12x 5ml Vials 7 x GreyHolds: 4 x 12ml Vials 8 x MSE BrownHolds: 1 x 100ml VIals 1 x Hex Key Locking Bar

This listing is for a Thermo Scientific TX-400 Centrifuge Rotor with Buckets. The unit is in full w (more)orking condition and is ready for immediate release. Supplied with x4- 75003655 Round Buckets Maximize the efficiency of your centrifugation processes with the TX-400 rotor, specifically designed for use with various Thermo Scientific centrifuges. Key Features: Capacity: Accommodates 4 x 400 mL samples, making it suitable for larger volumes in a single run. Impressive RCF: Achieves a maximum relative centrifugal force (RCF) of 4696 x g, allowing for effective sedimentation of a variety of sample types. Speed Capabilities: Operates at a maximum speed of 5000 rpm, providing flexibility for different centrifugation protocols. Tube Specifications: Diameter: 80 mm for standard tubes. Length: Capable of holding tubes up to 125 mm in length. Radius: Designed with a radius of 16.8 cm for optimal performance. Type: Features a swinging bucket design, allowing for smooth and efficient separation as the buckets swing outward during centrifugation. Biocontainment Certified: The rotor is certified for biocontainment by CAMR, ensuring safety when working with biological samples. Compatibility: Specifically designed for use with the following Thermo Scientific centrifuges: Sorvall Legend X1 Sorvall ST 16 Multifuge X1 Megafuge 16 SL 16

Sigma 3-16KL Centrifuge This item was removed from a university laboratory where it was surplus to r (more)equirements. The centrifuge is in very good used cosmetic condition, showing signs of general use. The rubber boot around the motor shaft is perished and torn due to age and wear, but this can be easily replaced and does not affect the unit's operation. Functionality: - Powers up and runs as intended. - Tested at -10ºC and 37ºC, with temperatures reached as expected. Included Accessories: - Bucket Adapters: - 4 x Sigma 17355 - 4 x Sigma 17356 - 4 x Sigma 17358 - 4 x Sigma 17359 - 4 x Sigma 17362 - 4 x Sigma 17377 - 4 x Sigma 17190 lids for the buckets Also included: - Instruction manual

Eppendorf 5702 Centrifuge with A-4-38 Rotor The Eppendorf 5702 centrifuge has a maximum speed of 4,4 (more)00 rotations per minute, and a maximum g-force of 3,000 x g (RCF). The Eppendorf 5702 has a maximum capacity of 4 x 85ml samples and a timer with a time range between 1 and 99 minutes, with a continuous setting as well. With a relatively small footprint, the Eppendorf 5702 benchtop centrifuge can be used in a variety of applications without taking up valuable countertop real estate. The 5702 has a total weight of only 44 pounds, and a maximum height (lid open) of 20.7 inches, making it perfect for under the shelf usage. The 5702 can be used in a range of settings, from clinical to cell culture labs.INCLUDED: The Eppendorf 5702 Centrifuge w/ A-4-38 Rotor includes: - A-4-38 Swing Bucket Rotor w/ Buckets - 1 Set of 4 x 10ml Vacutainer Adapters - 1 Set of 2 x 15ml Adapters - Power Cord - Operator's Guide - Full 6 Month Parts and Labor Warranty Eppendorf 5702 Centrifuge with A-4-38 Rotor SpecificationsMaximum Speed4,400 RPMMaximum g-Force3,000 x g (RCF)Maximum Capacity4 x 85 mlTimer1 – 99 minutes continuousHeight with lid open20.7 inchesWeight44 lbs

Refrigerated centrifuge THERMO ELECTRON JOUAN GR4I With Rotor 11175338 Type: GR 4i Maximum centrifug (more)e speed: 8000 rpm refrigerated Voltage: 230V / 50/60Hz 1500 W Net weight: 200kg Maximum load: 3.6 kg Temperature range: -9 ° C to 40 ° C Dimensions (H x W x D): 80 x 85 x 66 cm With swinging bucket rotor 11175338 Maximum rotor speed: 4750 rpm With 4 M4 pods 11174218 with a capacity of 750ml + cover Replacement date on the Rotor: 09/2022 In good condition Year of manufacture: 2006

This was removed from a university lab where it was surplus to requirements. Included are; SIS Soft  (more)Imagine System Camera Control PanelBrand: Soft Imaging System by OlympusModel: Camera ControlSerial#: WE260313003 The item is in good cosmetic condition. It powers on with an ON switch illuminated. We are unable to test further as it requires a connection to an SIS System. SIS Handbox Remote ControlSerial#: N/A Item is good cosmetic condition but we are unable to test as it requires connection to SIS System. Other items included: 2 x SIS USB Drives Serial#1: A2660500Serial#2: A2660600 These are HASP Keys/Dongles Manuals included:SIS User's Guide Add-Ins x 2SIS Step by Step analySIS x 2SIS MegaViewSIS Report GeneratorSIS Exercise Book

Gilson MyPIPETMAN Select Multichannel P12x300, 20-300 uL PipetteFeatures - Designed to be ergonomic, (more) safe, and reliable while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 20 to 300 uL - 3 Year Manufacturer's Warranty

Yamato FP-413 High Performance Muffle Furnace 11.3L, 220V Operating Temperature Range 100°C to 1150 (more)°C Max. Temperature Reaching Time ~80 min. Internal Capacity 11.3L Features - RCF-free chamber - High-temperature accuracy at ±1.0°C - Upgraded with long-life R-thermocouple sensors - High accuracy controller for better operability and visibility - Excellent heat tightness with a firmly sealed chamber door - Program operation of maximum 99 steps, 99 patterns, with repeat operation function - High-quality alumina porcelain hot plate where the heater is not exposed to the inner chamber preventing contamination of samples - Safety features include self-diagnostic functions, calibration off-set, key lock function, auto-recovery after a power failure, earth leakage breaker, automatic overheat prevention device, and independent overheat prevention device High performance 11.3L muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. High accuracy controller for better operability and visibility. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±1.0°C. Upgraded with long life R-thermocouple sensors. High quality alumina porcelain hot plate where heater is not exposed to the inner chamber preventing contamination of samples. Program operation of maximum 99 steps, 99 patterns, with repeat operation function. Safety features include self-diagnostic functions, calibration off-set, key lock function, auto recovery after power failure, earth leakage breaker, automatic overheat prevention device and independent overheat prevention device. Optional items include exhaust system, N₂ gas loading device (with flow meter), temperature output terminal, time-up output terminal, sample tray, external communication terminal (RS232C), external communication adapter, event output terminal, operation signal output terminal and furnace floor plate. Temperature range 100°C or 1150°C. INCLUDED: The Yamato FP-413 High Performance Muffle Furnace 11.3L, 220V includes: - Exhaust port cap, fuse, furnace floor plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

If you buy a WLY series balance by July 31, 2024, you will receive each of these products along with (more) a FREE lifetime license for the Workflow Module. Precision Balance WLY Fast and accurate weight determination thanks to the duo: the WLY multifunction balance and the PUE7 weighing terminal. Ease of operation and maximum automation of the weighing process. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations and differential weighing. The power of WLY’s working mods. Use the potential Barcode scanners, receipt printers, label printers, RFID readers, PC equipment or an additional weighing platform – thanks to multipurpose software, WLY balance can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. DIY with WLY With WLY you will Do It Yourself: You will program on-screen keys and functional keys You will program infrared proximity sensors You will design printouts You will design text data that is displayed in an indicator display. This balance is the result of a combination of our experience and true precision. Want to generate labels? You can. With Label Editor software, you will generate: Standard labels for single products C labels for cumulative containers CC labels for containers with cumulative containers. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW