Eppendorf 5430R Refrigerated Centrifuge w/ Selectable Rotor

Hermle Z446 Centrifuge w/ Swing Out Rotor The Z446 universal centrifuge series offers the highest ca (more)pacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 x g with full loads of up to 28 x 50ml or 68 x 15ml tubes. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z446 Centrifuge w/ Swing Out Rotor includes: - Z446-750 4 x 750ml Swing Out Rotor - Z446-750-B50 7 x 50ml Conical Buckets (Set of 2) - Z446-750-B15 17 x 15ml Conical Buckets (Set of 2) - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z327-K Refrigerated Centrifuge Speed Range 200 to 18,000 RPM Maximum Capacity 4 x 200ml Tempe (more)rature Range -20°C to 40°C Features - Maintenance-free induction drive - Microprocessor with large LCD display - Motor driven lid lock - Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion - Active imbalance identification and cut-off (rotor specific) - CFC-free refrigeration system (Z327-K) - A large variety of rotors and accessories - Audible signal at the end of each run with several melody options - Noise level under 63 dBA at max. speed - Manufactured according to international safety regulations, i.e. IEC 61010 - Rotor exchange is easy to handle - Stainless steel chamber Both the Z327 and the refrigerated Z327-K offer a wide assortment of rotor options (up to 19), making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high-volume fixed angle rotors is very simple and can be done in a matter of seconds. The Z327-K features rear mounted refrigeration system, optimized for saving space on the lab bench at only 40 cm wide! Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z327-K Refrigerated Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Gilson Pipetman L P1000L 100 - 1000 uL, Metal Ejector Pipette Designed for performance and comfort,  (more)PIPETMAN® L comes in a comprehensive range of models adapted to your needs in the lab. Comfortable, precise, accurate, and reliable, use PIPETMAN L pipettes confidently in your applications.Available as a fixed or variable volume, the PIPETMAN L air-displacement pipettes cover a full volume range, including: - Variable volume single channel models covering a volume range from 0.2 μL to 10 mL - Variable volume multichannel models covering a volume range from 0.5 μL to 1200 μL, including four models equipped with V-rings (VR) at the bottom of the tip holder for a proper fit with most tip brands, covering a volume range from 20 µL to 300 µL - Fixed volume single channel models covering a volume range from 1 μL to 5000 μL Convenient Use Lightweight and balanced, PIPETMAN L combines an ergonomic design with minimized pipetting forces, giving you the ability to pipette longer without fatigue. Right-handed or left-handed? No problem. Adjust the location of the tip ejector to the most comfortable position for you. Secure Pipetting Reduce pipetting errors and avoid accidental volume changes during pipetting cycles with a true volume-locking mechanism for improved accuracy and precision. PIPETMAN L variable volume models are all fully autoclavable without disassembly for maximum convenience and protection from cross-contamination. Large volume models are equipped with a plastic tip ejector to avoid direct contact with the tip and better compatibility with chemicals. Choose Your Tip Ejector For single channel models, choose between a model with a stainless-steel tip ejector or a plastic ejector, depending on your needs and applications. GLP Compliance PIPETMAN L models feature a DataMatrix 2D code for easy traceability. Use a 2D code scanner to transfer the code automatically into any traceability or asset management system. Also, the pipette serial number is engraved on the body of the pipette for unique identification. Click Here to View Product Video CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Pipetman L P1000L 100 - 1000 uL, Metal Ejector Pipette includes: - Operator's Guide - 3 Year Manufacturer Warranty Gilson Pipetman L P1000L 100 - 1000 uL, Metal Ejector Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeManual Air DisplacementVolume Range100 - 1000 µLPipette ModelP1000LPipette RangePIPETMAN LNumber of Channels1Ejector TypeMetalPack Size1Pack Size UnitEachComparison of ModelsSpecificationsP2L (0.2 - 2 µL)P10L (1 - 10 µL)P20L (2 - 20 µL)P100L (10 - 100 µL)P200L (20 - 200 µL)P1000L (100 - 1000 µL)P5000L (500 - 5000 µL)P10 mL (1 - 10 mL)Adjustable or Fixed VolumeAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustablePipette TypeManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementVolume Range0.2 - 2 µL1 - 10 µL2 - 20 µL10 - 100 µL20 - 200 µL100 - 1000 µL500 - 5000 µL1 - 10 mLNumber of Channels11111111.comparison-table tr td:nth-child(7) { background-color: #fffacd; }

MultiFlo FX is an automated multimode reagent dispenser for 6- to 1536-well microplates. The system  (more)incorporates several unique technologies in its modular design, such as Parallel Dispense, random access dispense (RAD) and patented Automated Media Exchange (AMX) modules. The technologies in MultiFlo FX microplate dispenser enable many liquid handling applications from 2D and 3D cell culture to concentration normalization assays, ELISA, bead-based assays and more. A fully configured MultiFlo FX replaces up to five liquid handlers, saving space, time, and instrumentation budgets. MultiFlo FX delivers complete workflow automation in cell imaging and biochemical applications. Product Type: Microplate Dispenser For Use With (Application): Primary/secondary screening assays, compound storage, genomics and proteomics research, ELISA, cell based washing, fixing, staining, volume or concentration normalization For Use With (Equipment): BioStack and third party automation compatible; BioSpa 8 Automated Incubator compatible Volume: 500 nL to 30,000 μL Precision: <5% CV at 1 μL, <2.5% CV at 5 μL, <2.0% CV at 10 μL Accuracy: ±5% at 1 μL, ±2.0% at 5 μL, ±2.0% at 10 μL Plate Type: Dispensing (peri pump and syringe): 96-, 384- and 1536-well standard, deep and PCR plates; 6-. 12-, 24- and 48-well plates (dispense tip configurable); Washing: 96-. 384-well standard plates; 6-, 12-, 24-,and 48-well plates (with compatible manifold configuration) Speed: 96 wells, 5 μL cass, 10 μL/ well: 3 s, 96 wells, 5 μL cass, 20 μL/ well: 3.5 s, 384 wells, 5 μL cass, 5 μL/ well: 6.5 s, 384 wells, 10 μL cass, 10 μL/ well: 8 s, 384 wells, 1 μL cass, 1 μL/ well: 6 s, 1536 wells, 1 μL cass, 1 μL/ well: 21 s Dimensions (WxHxD): 435 x 203 292 mm Weight: 6.5 kg

Temperature range: Ambient +5°C to 80°C Temperature uniformity: ±0.25°C at 37°C Speed range: 25 up t (more)o 500 rpm (depending on load) Orbit: 25 mm Timer: 0.01 – 99.59 h, continuous Platform size: 460 x 460 mm Dimensions (WxDxH): 559  x 762 x 610 mm Weight w/o accessories: 60.3 kg

Separating substances at medium rotational speeds: IKA G-L is the ideal midi centrifuge for all type (more)s of separation processes such as those found in molecular biology. It can be used with standard 1.5/2 ml vessels. The cover opens automatically at the press of a button. Capacity: 12 x 1.5/2.0 ml Permitted density: 1.2 kg/dm3 Centrifugal acceleration: 16500 G Speed range: 800 – 15700 rpm Timer: yes Timer display: 7 segment LED Unbalance sensor: yes Quick stop: yes Cover opening: automatic Dimensions (WxHxD): 200 x 140 x 280 mm Weight: 3.9 kg