Eppendorf 5424 Centrifuge

Maximum Speed: 14000 rpm Maximum Force: 16,750 xg Chamber Temperature: -5°C to 40°C (by 1°C) Rotatio (more)n: 300 -14000 rpm (by 100 rpm), 1 – 100 xg (by 1 xg),  101 – 16,750 xg (by 10 xg) Spin Duration: 0:01 through 0:59 (by 1 second), 1:00 through 4:45 (by 15 seconds), 5 through 360 min (by 1 min), Momentary operation mode, Hold mode (indefinite duration),  Timing mode Repeatability: Temperature Control: +/- 1 C° in the range from +4° C to ambient Rotation to 10 RPM Spin Timing 0.1 seconds Dimensions (HxWxD): 400 x 470 x 690 mm Weight: 73 kg Equipped with: 223A Swing out rotor (max 4400 rpm) 4x Bucket 4x Insert (4x 15 ml falcon tube capacity)

Maximum RCF with fixed angle rotor: 20913 x g Maximum RCF with swing-bucket rotor: 4500 x g Maximum  (more)RCF with plate rotor: 3486 x g Speed range: 200 – 14000 rpm Temperature range: -9 °C to 40 °C Maximum capacity: 4x 750 mL/4x MTP Acceleration/braking ramps: 10/10 Timer: 1 min to 99 min, continuous, short-spin Dimensions (WxDxH): 700 x 608 x 345 mm Weight: 99 kg Equipped with: 1x Eppendorf A-4-81 swing-out rotor (max 4000 rpm) 4x Eppendorf bucket 4x Eppendorf bucket aerosol-tight lid 4x Eppendorf MTP carrier 4x Eppendorf insert (10x 15 mL falcon tube capacity) 4x Eppendorf insert (5x 50 mL falcon tube capacity)

This ALC Multispeed Refrigerated Centrifuge PK 121 R was removed from a university lab where it was  (more)surplus to requirements. The unit is in reasonable cosmetic condition but has been previously used. The start button is damaged but still works. The unit powers on and has been tested. It spins up to 4100rpm, but the rotor is rated at 4300rpm. When set to its lowest which is -10 degrees it got down as low as -12. When set to its max which is 40 degrees it displayed 39 and was at 37. The Rotor number displayed T515.The Buckets Serial number is 0306/01.The buckets Cat Number is 11210335.The number on the bottom of the buckets is Ch. 007027 S.303.The bucket adaptors inside the buckets were numbered ALC R2035 & the Cat Number is 11172435. The ALC 2035 Adapter is for 50ml tubes.

Thermo Scientific Fresco 21 Refrigerated Benchtop Centrifuge This item was removed from a university (more) laboratory where it was surplus to requirements. The centrifuge is in very good used cosmetic condition, showing signs of general use.It powers on and operates as expected, with temperatures tested successfully. Testing Details:- Tested at -9ºC and 37ºC, both of which were achieved in a reasonable amount of time. - Motor spindle has been greased for optimal performance. Specifications:- Model: Fresco 21 - Manufacture Date: 2009 Includes:- User Manual

Hermle Z496-K High Volume Underbench Centrifuge (230V ONLY) The Z496-K centrifuges offer the highest (more) tube/bottle capacity in our line. Several rotors are available, including a popular 4 position swinging bucket rotor with a wide offering of accessories for the centrifugation of tubes, bottles, plates and blood bags. The high capacity rectangular buckets accept microplates directly or a variety of tube inserts for accomodating as many as 40 x 50ml conical or 96 x 15ml conical tubes per run. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving up to 99 saved programs, the easy to use front panel can adjust accel/decel rates, time, and convert operation between rpm and rcf. The powerful refrigeration system, with a range of -20° to 40° C, also features a precool function that ensures the temperature of the chamber is optimized for any application. A standard floor standing model is available (height: 38.6 in.) which includes a convenient lower drawer for te storage of frequently used rotors and accessories. In addition, a space saving “underbench” model (height: 27.5 in.) is available when under the counter storage is preferred. Both models are equipped with wheels for easy maneuverability around the laboratory. For all your high capacity, high volume needs, the Z496-K floor standing series is the perfect centrifuge. INCLUDED: The Hermle Z496-K High Volume Underbench Centrifuge (230V ONLY) includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Working-temperature range: 5°C above ambient temperature up to 50°C Standard sterilisation program:  (more)60 minutes at 180°C (without removing the sensors) Setting temperature range: 18 to 50°C Setting accuracy temperature: 0.1°C Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error Temperature variation in chamber (at 37°C): +/- 0.3 K Temperature fluctuations with time (at 37°C): +/- 0.1 K Humidity control: Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 % Setting accuracy humidity: 0.5 % rh CO₂ control: Digital electronic with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation Adjustment range CO₂: 0 to 20% Setting accuracy CO₂: 0,1% Variation in time CO₂: +/- 0.2% Adjustment range O₂: 1 to 20% Setting accuracy O₂: 0.1% Max. number of internals: 10 (3 included) Max. loading of chamber: 120 kg Max. loading per internal: 15 kg Volume: 156 l Internal dimensions (WxHxD): 560 x 700 x 400 mm Dimensions (WxHxD): 719 x 1070 x 591 mm Weight: 90 kg

Buchi R-210 Rotavapor Rotary Evaporator & Heidolph Heizbad WB Water Bath This was removed from  (more)a university lab where it was surplus to requirements. The system powers up and the motor and the water bath are in full working order. It is in reasonable cosmetic condition with marks and stains. Included are; 1 x Buchi RotavaporType - R-210SN - 0700006764Adjustable height from 47 to 57cm 1 x Heidolph Water BathType - Heizbad WBSN - 029902413

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Manufacturer: Waters XSelect Model: XSelect HSS PFP XP Column, 100Å, 2.5 µm, , 3 mm X 100 mm P/N: 18 (more)6006179 Description: The XSelect HSS PFP column is a low coverage, unendcapped pentafluorophenyl phase that provides exceptional separation of closely related compounds as well as alternate selectivity to traditional alkyl chain columns due to an intricate combination of retention mechanisms. Packed in ultra-low dispersion hardware, 2.5 µm eXtended Performance [XP] columns enable exceptional separation performance, robustness and throughput for HPLC assays while enabling a seamless transition path toward UPLC adoption. Specifications: % Carbon Load: 7.1 Bonding Technology: PFP Brand: XSelect Chemistry: PFP / Fluoro-Phenyl Endcapped: No Endfitting Type: Waters Format: XP Column ID: 3 mm Length (mm): 100 mm Mode: Reversed-Phase Particle Shape: Spherical Particle Size (dp): 2.5 µm Particle Substrate: Silica Pore Size: 100Å Silanol Activity: High Surface Area: 230 System: HPLC Technology: HSS USP Classification: L43  pH Range: 2 - 8 The column is in brand new condition, packed and sealed in box - never used.

Ohaus FC5916 Frontier Multi-Pro Centrifuge w/ Selectable Rotor Speed Range 200 to 16,000 RPM Maximum (more) Capacity 4 x 750ml Warranty 2 Year Manufacturer's Features - Automatic rotor identification makes switching between applications extremely easy - Simple one-hand operation enabled by the selection button/rotary knob combination—even with gloves on - Large backlit LCD display shows centrifugation settings and real-time parameters on one interface - Program storage up to 99 runs including parameter settings and rotor types - Maintenance-free induction drive - Thread-free rotor locking mechanism - Optimized airflow system to keep samples cool (non-refrigerated models) - Chemical and corrosion-resistant stainless-steel housing ensures durability in lab environments - Self-diagnostic program to record usage and error history for easy maintenance and to minimize downtime - Over-speed protection, immediately upon rotor insertion - Active imbalance-detection with individual imbalance tolerances set for each rotor - Motorized lid-locking system to protect operators from accidental injuries - Sealed and bio-containment rotors to safeguard operators from harmful aerosols Click Here to View Product Video The Ohaus Frontier 5000 Series Multi-Pro Centrifuges are designed for universal use in multiple applications in research, industrial, and clinical laboratories and can be combined with a range of rotors and accessories for customized use. These centrifuges are available in 7 models with capacities from 0.2ml to 4 × 750 ml - and feature high speed performance at maximum volume, automatic rotor identification and safety features. These multi-purpose centrifuges offer a high-speed centrifugation platform which can be customized to fit workflow needs using a wide variety of rotors and accessories. The intuitive design of the centrifuges & accessories enables easy access to parameter settings, and quick rotation between applications. The performance of these centrifuges is propelled by German engineering, and high-quality components for reliable use. Constructed of chemical-resistant stainless steel to ensure durability in lab use. The Frontier 5000 Series is equipped with protective features, including automatic overspeed protection, imbalance detection and self-diagnostic system to ensure reliable use and operator safety. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Ohaus FC5916 Frontier Multi-Pro Centrifuge w/ Selectable Rotor includes: - FC5916 Frontier Multi-Pro Centrifuge - Selected Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson PIPETMAN G Microvolume Starter Kit, P2G, P10G, P100GThe PIPETMAN G Microvolume Kit provides t (more)he three pipettes most commonly used by molecular biologists for pipetting enzymes, reagents, and buffers - a P2G, P10G, and P100G - plus pipette holders, tips, and pipetting guide. With a redesigned piston assembly, the PIPETMAN G pipettes feature extremely low pipetting forces, improving comfort and minimizing injury. This is all accomplished while maintaining the durability, accuracy, and reliability of the original PIPETMAN pipettes. Premium Pipetting ComfortWith a new seal and lighter springs, the new piston assembly of PIPETMAN G Pipettes significantly reduces the force needed to aspirate and dispense liquids. The benefit is especially helpful during extended pipetting sessions and alleviates common hand stresses caused by repetitive actions.FlexiblePIPETMAN G Pipettes come with a durable stainless steel tip ejector which is ideal for most situations. Plastic tip ejectors are available separately and recommended for working with corrosive substances.CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE v INCLUDED: The Gilson PIPETMAN G Microvolume Starter Kit, P2G, P10G, P100G includes: - Three PIPETMAN G Pipettes: P2G, P10G, P100G - Two Racks of PIPETMAN DIAMOND Tips (Models: DL10 and D200) - Three SINGLE Pipette Holders - Three Plastic Tip Ejectors - Adapter for P2G and P10G Tip Ejectors - Manufacturer's Documentation - Operator's Guide - 3 Year Manufacturer's Warranty