Benchmark C2248 StripSpin 12D Digital Mini Centrifuge w/ PCR Strip Rotor

This Eppendorf 5810R Refrigerated Laboratory Centrifuge was removed from a university lab where it w (more)as surplus to requirements. The unit powers up and is in good cosmetic condition. It is in good working order. Tested with the A-4-62 rotor fitted, it ran smoothly up to, 4000rpm. The centrifuge was last serviced by an engineer on 11.07.23 All additional items included: 1 x Eppendorf A-4-62 Swing Bucket Rotor4 x MTP swinging plate buckets 4 x 250 ml rectangular plate buckets8 x tube holders 1.2-5ml 25 wells2 x 15ml bucket adapters 9 wells

This listing is for a Eppendorf 5702R Refrigerated Centrifuge The range of Eppendorf 5702 general p (more)urpose, low-speed centrifuges has been designed specifically to meet the needs of mid-throughput clinical research and cell culture laboratories. These centrifuges are very compact, so that they fit easily on the lab bench, as well as extremely quiet.

TOMY One Spin Mini Centrifuge New equipment in its original packaging Model/model number: One Spin - (more) mini laboratory centrifuge Maximum capacity: 1.5/2.0 ml microtubes x 4 Rotation speed: 4,000 rpm (±20%) *Fixed Centrifugal acceleration: 420-950 × g (1.5 ml) / 450-1000 × g (2.0 ml) Size/Weight: L105×D130×H96mm 0.38kg Single-phase power supply AC100-240V 50/60Hz 0.6A (dedicated power adapter)

MARSHALL Select MS-CE12000 Hematocrit Centrifuge, 12,000 RPM Maximum Speed 12,000 RPM Maximum RCF 1 (more)4,170 × g Maximum Capacity Hematocrit Rotor: 24 x capillaries Features - Reaches up to 12,000 RPM for efficient hematocrit determinations - Streamlined and practical with an all-steel structure for durability and safety - Space-saving design suitable for various laboratory settings - Features an integral food-grade silicone ring to prevent aerosol overflow - Includes detection functions for door lock and motor status - Push-button programming with digital display for easy parameter settings The MARSHALL Select MS-CE12000 Hematocrit Centrifuge, a high-performance centrifuge engineered to meet the demanding requirements of immunohematology and research laboratories. Operating at a maximum speed of 12,000 RPM, this centrifuge specializes in the accurate determination of hematocrit (HCT) values by centrifuging anticoagulant-treated whole blood in disposable capillary glass tubes. After a brief 5-minute spin, the proportion of red cells is measured against the total volume of blood, allowing precise analysis of the blood's hematocrit level. The machine's ergonomic, streamlined design not only ensures practicality and safety with its all-steel structure but also enhances the aesthetic appeal of any laboratory setting. The MS-CE12000 is not just robust but also intelligently designed for ease of use and safety. It features a compact, space-saving footprint and is equipped with an integral food-grade silicone sealing ring to prevent aerosol overflow, safeguarding the operator. The centrifuge boasts electromechanical integration for its door lock, ensuring reliability and safety during operation. Additionally, its user-friendly interface includes push-button programming and a digital tube display for setting and monitoring centrifugal speed and time. With real-time detection systems for door lock and motor status, complemented by an alarm function for enhanced diagnostic safety, this centrifuge is an essential tool for modern laboratories focused on hematology and cytology. INCLUDED: The MARSHALL Select MS-CE12000 Hematocrit Centrifuge, 12,000 RPM includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Embossed foil keypad for simple operation Short-spin function with pre-selected rotational speed rpm (more) or rcf settings as required (from 500 rpm in steps of 100 rpm) Timer up to 99 min or continuous run Soft key for gentle acceleration and deceleration Automatic imbalance detection Equipped with a Eppendorf F-45-30-11 fixed angle rotor. Rotor has a 30x 3,75 g capacity and a max rpm of 14000. Max. rotational speed: 14,000 rpm Max. load: 30 x 2.0 ml Safe-Lock Microcentrifuge Tubes Max. density of material to be centrifuged: 1.2 g/ml Max. kinetic energy: 6,100 Nm Dimensions (HxWxD): 228 x 310 x 430 mm Weight: 17 kg

This CTC Analytics HTC PAL MXY 04-01A Autosampler System was removed from a university lab where it  (more)was surplus to requirements. The system powers up and is in good cosmetic condition. Any issues with the individual modules are listed below. Included in the system are; 1x CTC Leap Technologies AutosamplerModel MXY 04-01A 1x CTC Injection UnitModel No. MZ 01-00F 1x CTC Stack Cooler DWModel MC 04-01 Rev. GThe drawer doors have come away (plastic screws snapped) 1x CTC Power SupplyPart No. MN 01-00 1x CTC Pelter ThermostatPart No. MN 03-00 1x CTC TerminalModel No. 01-00A 1x CTC Injection Valve Drive unitModel No. MV 02-01A 1x CTC Arm PlatformModel No. MR 034-02B 1x Motor Assembly Syringe PalModel No. MM 01-01F 1x Active Reverse Rinse UnitSer No. SDS1208007 1x XP power supplyModel AED45US24 1x Syringe Holder:Model No. MSU 014-00A The unit is in good cosmetic condition. 1x Citation High Performance Sample LoaderThe PC powers on and is in good cosmetic condition. There is a Leap Technologies program on the Sample loader Other Control Programs:• Solvent Conditioner Control 2.16•One Minute NMR 2.18.43•Citation Control 2.4 1x Protasis Desgasser 1x Reloatable Power TapModel PDU20BHVIEC 10R 8x IEC ports Accessories: 2x PAL System X Type Syringes:Part No. 20452/01 • 100µl Hamilton Gas tight glass Syringes2x 5.0ml 1x 1000µl 1x 0.25µl The units are in good cosmetic condition. 1x L-Mark glass Syringe:F/N 0.72(G22s)b51•50µl The unit is in good cosmetic condition (with needle) 100ml Wheaton Glass bottles: 3x with lids2x without lids The units are in good cosmetic condition. 500ml Glass bottles1x Simax (with lid) 1x Boro 3.3 (without lid) The units are in good cosmetic condition.

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

Dimensions (HxWxD): 2900 x 1200 x 600 mm

Temperature range: Ambient +10°C to 250°C Warm-up time to 70°C: 50 min Warm-up time to 150°C: 55 min (more) Warm-up time to 250°C: 60 min Recovery time after door opened for 60 s at 70°C: 5 min Recovery time after door opened for 60 s at 150°C: 12 min Recovery time after door opened for 60 s at 250°C: 16 min Capacity: 56 L Dimensions (WxHxD): 696 x 850 x 685 mm Internal dimensions (WxHxD): 396 x 460 x 308 mm Weight: 55 kg

Getinge 46-series washer-disinfectors combine hygienic and ergonomic solutions with well-proven tech (more)nology for maximum user safety. Getinge 46-series Washer-Disinfectors offer a large chamber size with a minimal external footprint. Thanks to the built-in heat exchanger, the 46-series dries items effectively on both the inside and outside. Drying time and temperature can be preset for each program via the control panel. The display uses plain language to explain what’s happening in every stage of the washing and disinfecting processes. Simply select one of the six preset programs and press the start button. Wash levels (up to): 4 pcs Chamber volume: 201 L Internal dimensions (WxDxH): 550 x 620 x 590 mm Dimensions (WxDxH): 650 x 690 x 1860 mm