Benchmark C2205 MyFuge 5D Digital Microcentrifuge w/ Combination Rotor

Hermle Z207-M Centrifuge

Hermle Z207-M Centrifuge Due to the compact design, the Microlitre Centrifuge Z207-M, is applicable (more)even in the smallest laboratory setting. There are two rotors available, the 24-place microlitre rotor either with snap-on lid or hermetically sealed lid, and the rotor for Spin Column Kits. Of particular note is the innovative control panel with Touch-function. FeaturesMicroprocessor with large LCD displayElectrical lid lockPre-selection of the rotor typeQuick access to samplesActive imbalance identification and cut-offAir Cooling SystemQuick Acceleration and DecelerationNoise level < 60 dBA at max. speedEasy rotor exchangeManufactured in accordance to InternationalSafety Regulations, i.e. IEC 61010Quick acceleration and deceleration within 13 seconds Distinct Control PanelControl panel with Touch-OperationSimple one-handed operationEasy to program with gloves onSplash-proof foil keyboardPermanent indication of pre-set and actual valuesSelection of speed in both rpm and g-force, in increments of 1010 acceleration and deceleration rates, possibility of unbraked decelerationPre-selection of the running time, from 10 s to 99 h 59 min or continuousStorage of up to 99 runs, including rotorQuick-key for short runs Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z207-M Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

$2,744.00 ex VAT

Eppendorf 5702 Centrifuge

Speed (100 rpm increments): 100 – 4400 rpm Maximum RCF: 3000 x g Maximum capacity: 4 x 100 mL Accele (more)ration time: ≤ 19 s Deceleration time: ≤ 19 s Timer: 0 – 99 min, or continuous Dimensions (WxDxH): 320 x 400 x 240 mm Weight: 19 kg Equipped with: 1x Eppendorf A-4-38 swing-out rotor 4x Eppendorf 100 mL round bucket 4x Eppendorf insert for 4 round bottom tubes

€2,249.00 ex VAT

Proteal Duografter II Centrifuge

€1,499.00 ex VAT

Heraeus Biofuge 28 RS Centrifuge

Max speed: 28000 rpm Max RCF: 51710 xg Acceleration: 9 stepped, reproducible profiles Braking: 9 ste (more)pped, reproducible profiles and unbraked deceleration Temperature control: 0°C to 40°C Dimensions (HxWxD): 358 x 540 x 600 mm Weight: 100 kg Equipped with: Heraeus 3740 fixed angle rotor Max speed 28000 rpm Capacity 12x 1.5 mL

€1,999.00 ex VAT

Agilent Set of 2x Frit, PTFE, 5/pk / 01018-22707

People are watching right now:

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€64.00 ex VAT

€76.16 incl. VAT if applicable

Germany

general laboratory equipment other

Varian SPS-5 Autosampler

For sale: refurbished Varian SPS-5 Autosampler Also available: SPS3 sampler and other options if n (more)eeded Other Atomic Absorption Systems like Varian 220FS, 220Z Furnance, 240Z Furnance, Perkin Elmer series New and used parts for Agilent and Varian AAS systems We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! We can deliver maintenance and repair services by our own engineers The SPS-5 Sample Preparation System is a random-access autosampler which can be connected to all of the AA, ICP and UV spectrometers currently manufactured by Varian. It can hold up to 500 samples when the optional rear rack extension is fitted. A fume hood is also available. A range of rack types is available for different test tube sizes. Rack hole sizes can be further customized with the 60 position (Type 25) rack for different test tube diameters. The SPS-5 is compatible with the optional on-line Auto-Diluter. The SPS-5 autosampler includes rinse station, two racks (Type 25 and Type A) and inert probe. Standard configuration allows up to three sample or standard racks to be used at once. With the optional rack extension, up to five racks may be accommodated. Racks must be ordered separately. The autosampler requires but does not include test tubes/bottles. The SPS-5 is also available in a fibreoptic autosampler version for use with the Cary 1, 3, 4, 5, 50, 100, 300, 400 and 500 with the Cary WinUV software. Version 2 of the WinUV software does not support use of the SPS-5 with the normal liquid sampling probe nor does it support the optional Diluter. Rack recognition To reduce the risk of operator error, the SPS-5 features Magnetic Rack Recognition (MRR). Each rack has an embedded magnet which is detected by sensors in the SPS-5. The SPS-5 can detect rack presence and type, minimizing the risk of operator error during rack changes. Rack types The SPS-5 can be fitted with five different rack types, catering for a range of sample vessels: Rack type Capacity Tube volume (nominal) Type 10 100 10 mL Type 25 60 25 mL Type 50 35 50 mL Type A 12 125 mL Type B 6 500 mL The Type 25 rack can be fitted with adapters to hold small diameter test tubes. The Type A and B racks are supplied with vessels. All racks are made from chemical-resistant polypropylene. Probe height The height of the SPS-5 probe can be programmed so that you can sample from a particular layer in a sample or avoid aspirating sediment from the bottom of a vessel. Diluter An optional Diluter can be fitted to the SPS-5. This can be used for off-line standard and sample preparation prior to a run. It can also be used to perform on-line dilutions for some techniques.The Diluter’s design ensures that the syringe is never contaminated. After dispensing any solution into a sample vessel, the SPS-5 will mix the contents with the probe. The probe is simultaneously vibrated horizontally and moved up and down through the solution. Splashing is eliminated as the probe height is set in response to the volume in the vessel.

automated liquid handling

Scilogex Plate Stand

Scilogex Plate StandThe Scilogex Plate Stand includes the support rod and clamp. Plate size 12 x 8 i (more)n, rod length 31 in. INCLUDED: The Scilogex Plate Stand includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

$159.00 ex VAT

general laboratory equipment other

IKA Pette Vario 20 - 200ul Pipette

IKA Pette Vario 20 - 200ul Pipette Features - Improved ergonomics as a result of replaceable handle (more)s ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 20 - 200ul Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 20 - 200ul Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range20 - 200 µlIncrements0.2 µlAccuracy (Nominal Volume µl / %) ± 1.2 µl / 0.6%Precision (Nominal Volume µl / %)± 0.4 µl / 0.2%Accuracy (50% of Nominal Volume µl / %)± 1 µl / 1%Precision (50% of Nominal Volume µl / %)± 0.3 µl / 0.3%Accuracy (10% of Nominal Volume µl / %)± 0.5 µl / 2.5%Precision (10% of Nominal Volume µl / %)± 0.14 µl / 0.7%

$165.00 ex VAT