Benchmark C1005-T5 Clear Centrifuge Tube, 5ml, 200 per. pk. (4 bags of 50)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Benchmark C2205 MyFuge 5D Digital Microcentrifuge w/ Combination Rotor The myFuge™ 5D digital mini c (more)entrifuge includes a four position rotor that accepts a variety of 5ml tubes (including 5ml snap-cap and screw-cap centrifuge tubes, as well as 5ml blood collection tubes). In addition, the rotor has four positions for positions for standard microtubes (1.5/2.0ml) and offers optional adapters for 2ml cryotubes, 0.2ml PCR tubes, and 0.5ml microtubes, making it one of the most versatile and compact centrifuges in its class.The myFuge 5D offers digital speed control (up to 5,500 rpm). Timer is also controlled (up to 99 min.) with a safety interlock to stop the centrifuge if the lid is opened during operation. With built in rcf conversion, speed can be set/displayed in rpm or rcf. The myFuge 5D also comes with a 2-year warranty.INCLUDED: The Benchmark C2205 MyFuge 5D Digital Microcentrifuge w/ Combination Rotor includes: - Power Cord - COMBI Rotor - Two Year Manufacturer's Warranty

Labconco 7548700 PTFE-Coated Microcentrifuge Tube Rotor PTFE-Coated Aluminum Rotor for CentriVap mic (more)ro IR. Holds twelve 15 ml vials, 20 mm dia. x 70 mm tall. INCLUDED: The Labconco 7548700 PTFE-Coated Microcentrifuge Tube Rotor includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hermle Z446 Centrifuge w/ Swing Out Rotor The Z446 universal centrifuge series offers the highest ca (more)pacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 x g with full loads of up to 28 x 50ml or 68 x 15ml tubes. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z446 Centrifuge w/ Swing Out Rotor includes: - Z446-750 4 x 750ml Swing Out Rotor - Z446-750-B50 7 x 50ml Conical Buckets (Set of 2) - Z446-750-B15 17 x 15ml Conical Buckets (Set of 2) - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

ECO G Lauda Series - Refrigerated Thermo-Cryostats LAUDA ECO G cryostats offer reliable technology a (more)nd modern design for temperature ranges from -50°C to 200°C depending on the models. Microprocessor management and integrated cooling system. Gold control heating head (TFT color graphic display and graphic illustration of temperature profiles), with 5 programs and 150 segments each, equipped with mini USB interface. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Examples of specific applications - Sample preparation in chemistry and pharmacy - Functional tests of electronic components - Bearing tests - Beer forcing test - Valve tests - Stress tests - Bending test - Expansion test - Semiconductors Notable features - PID microprocessor management - TFT graphic display with graphic representation of temperature profiles - Alphanumeric navigation menu - Overtemperature protection - Protection class III for operation also with flammable liquids - Pump adjustable to 6 levels - Front adjustment of the external/internal pump power without removing the control unit - USB interface - Possibility to upgrade with various interfaces - Possibility of upgrading with Pt100/LiBus for external control via console - Programmer with 150 segments for 5 programs - Integrated programmer with up to 20 segments - Standard pump connectors - Steel tub - Drain tap Graph of cooling performance of ECO Gold LAUDA cryostats. Performance graph of the pump pressing on the six levels.

Orbital shaker or back and forth KL2 EDMUND BUHLER New equipment in its original packaging Orbital o (more)r reciprocating (horizontal) shaker Platform dimensions: 300 x 300 mm Max load: 2 kg Orbital shaking speed: 30 - 420 rpm Amplitude of agitation back and forth: 8 mm Timer: 0 - 120 min or continuous Delivered with tray with 3 clamping bands

A laboratory incubator with an exceptional quality/price ratio! 100% Made in Italy and with all acce (more)ssories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM Falc incubator has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 80°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory incubator ICT FALC

Julabo PURA 30 Water Bath, 115V/60Hz (NRTL Certified) Working Temperature Range 18°C to 99°C Heatin (more)g Capacity 1300W Volume 36L Features - Ease of use - Bright display - Splash-proof protected mains switch - Built-in dry running protection - No disturbing elements in the bath - Platform included as standard - Integrated timer - Non-slip rubber feet - Ergonomic recessed grips - Integrated drain screw The Julabo PURA water baths stand for a straightforward and safe working in the laboratory. The high-quality water baths offer a temperature stability of ± 0.15°C (with bath cover). The working temperature range of +18°C to 99.9°C (with counter-cooling/bath cover) allows a wide range of applications, such as routine laboratory work, temperature applications for samples, incubation, material testing, corrosion testing, temperature control applications of cultures as well as temperature tests of food and beverages and in the dental field. All models (except PURA 4) come with an integrated drain screw for quick and clean draining of the baths. PURA water baths can be used flexibly and can be easily transported through ergonomic side recessed grips. Non-slip rubber feet ensure a firm footing and more safety in the laboratory. The units are splash-proof, feature a (membrane) keypad and temperature display (LED) for ease of use. Operation in °F or °C with integrated timer. There are no disturbing parts inside the bath so that the entire inner surface can be used to safely temperature-control even small sample containers. Click Here to View Product Video INCLUDED: The Julabo PURA 30 Water Bath, 115V/60Hz (NRTL Certified) includes: - Platform - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Matrix Orbital Delta F0.5 Thermoshaker Speed Range 0 - 2000 rpm Time Setting Max. 6000 min Hea (more)t Output 100 Watts Features - Large and clear display with a convenient menu structure allows for intuitive operation - Speeds of up to 2,000 rpm and shaker diameter of 3 mm ensure the liquid mixes quickly and effectively - Two different speed modes for gentle heating of the samples - Programmable ramps allow for automatic execution of mixing and heating tasks - Smart speed adjustment according to insert, attachment and filling volume - Aluminum die cast housing ensures secure positioning, excellent stability and everyday robustness The IKA Matrix Orbital Δ F0.5 is part of a new and powerful product family of thermoshakers available. IKA Matrix Orbital Δ F0.5 mixes and heats with a fixed insert for 24 x 0.5 ml tubes. Whether its blood samples, pharmaceutical agents, DNA/RNA samples or ELISA assays – samples with even the smallest volumes mix reliably and completely in all laboratory applications. No cross-contamination and an optimal mixing result. In addition, IKA Matrix Orbital Δ F0.5 comes with numerous user-friendly features: Click Here to View Product Video INCLUDED: The IKA Matrix Orbital Delta F0.5 Thermoshaker includes: - MATRIX Orbital Delta F0.5 - IKA Pette vario 100-1000 µl - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Matrix Orbital Delta F0.5 Thermoshaker Specifications Type of movementorbitalShaking stroke3 mmMaximun load0.3 kgPermissible ON time100 %Speed min (adjustable)300 rpmSpeed range0 - 2000 rpmSpeed displayTFTSpeed deviation30 ±rpmSpeed control 10 RPM StepsTimer yesTimer display TFTTime setting min.1 sTime setting max.6000 minOperating modetimer, continuous and program operationHeating temperature rangeroom temp. +4° - 100 °CHeat output100 WHeat controlTFTSet temperature resolution1 ±°CTemperature control accuracy0.5 ±°CTemperature stability0.5 °CTemperature homogenity0.5 (@ 20°C ... 45°C); 1.5 ±°CHeating rate15 °C/minTemperature displayyesNumber of reaction vessels24x 0.5 mlDimensions (W x H x D)216 x 149 x 351 mmWeight9.2 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21RS 232 interfaceyesUSB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input240 WPower input max.240 WFuse2x T4A 250VComparison of ModelsSpecificationsMatrix Delta PlusMatrix Orbital Delta F0.5Matrix Orbital Delta F1.5Matrix Orbital Delta F2.0Matrix Orbital Delta FPMatrix OrbitalMatrix Orbital PlusShaking Stroke3 mm3 mm3 mm3 mm3 mm3 mm3 mmMaximum Load0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kgSpeed Range0 - 3000 rpm300 - 2000 rpm300 - 1500 rpm300 - 1500 rpm300 - 2000 rpm300 - 3000 rpm300 - 3000 rpmSpeed Control10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM StepsTime Setting Min.1 s1 s1 s1 s1 s1 s1 sTime Setting Max.6000 min6000 min6000 min6000 min6000 min6000 min6000 minHeating Temperature Range-10 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C--Heating Rate5.5 °C/min15 °C/min11 °C/min13 °C/min18 °C/min--Dimensions (W x H x D)216x127x351 mm216x149x351 mm216x158x351 mm216x158x351 mm216x147x351 mm200x120x320 mm216x127x351 mmVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(3) { background-color: #fffacd; }

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW