Beckman Optima L-60 Floor Standing Centrifuge Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

Beckman Avanti 30 Compact Centrifuge with F0850 Rotor & Manual This item was removed from a uni (more)versity lab where it was surplus to requirements. It is in good clean condition with minor marks around the display screen. The centrifuge powers on, with screen and controls functioning correctly. Temperature and RPM settings are operational, and are in good working order (thermometer not included). Specifications: - RPM Range: 0-30,000 RPM (max RPM with F0850 Rotor fitted: 16,500)\ - Time Range: 0-9 hours 59 minutes - Temperature Range: -20°C to 40°C Includes: - Beckman F0850 Rotor - Capacity: 8 x 50 ml - Max RPM: 16,500 - Rotor removal tool - Beckman Avanti 30 Compact Centrifuge Instruction Manual - Beckman Instructions for using F0850 fixed-angle rotor

Beckman Coulter Rotor Type 50.2 Ti This item was removed from a university where it was surplus to r (more)equirement. It is in good cosmetic condition, we are unable to test it further at our facility. Features:- Type - 50.2 Ti - Max RPM - 50,000 - The Unit Has 12 x Slots For Vials - Only Use in Instruments Classified H, R, S

Beckman Coulter JLA-10.500 Biosafety Liquid Centrifuge Canisters (Set of 2) This item was removed fr (more)om a university laboratory where it was surplus to requirements. Both canisters are in good cosmetic condition and rated for a maximum speed of 1000 RPM. Specifications:- Quantity: 2 Canisters - Max RPM: 1000

Benchmark LC-8 3500 Centrifuge Benchmark’s LC-8 series of laboratory centrifuges is uniquely designe (more)d to meet a wide range of applications in both the clinical and research laboratory. An eight position rotor is included and designed to directly accept 10ml and 15ml test-tubes (conical or round bottom), while optional adapters are also available for use with all popular sizes of blood collection and culture tubes. Unlike most compact centrifuges in this class, the rotor can be easily removed from the chamber for cleaning. The back-lit, liquid crystal display provides full control over the set run time and rotational speed. The rotational speed can be set/viewed in rpm or rcf and acceleration/deceleration levels can be easily adjusted in the advanced settings mode. To ensure safety, the digital microprocessor ensures that the lid has been closed and that the safety lid lock is engaged prior to starting a centrifugation cycle. In addition, an advanced imbalance detection system constantly monitors the balance and vibration, automatically bringing the rotor to a stop if an imbalance is detected. INCLUDED: The Benchmark LC-8 3500 Centrifuge includes: - 8 x 15ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 5920R Refrigerated Centrifuge The Eppendorf 5920R Refrigerated Centrifuge is a large bench (more)top refrigerated centrifuge with exceptional performance and high capacity, making it a superior choice for high-throughput applications. The Eppendorf 5920R combines outstanding functionality with an advanced operating system. It has a menu-driven, multilingual operation menu with a large backlit display that allows the user to save up to 99 programs. The FastTemp Pro function is also featured, providing fast, automated pre-cooling using a pre-programmable time and date. The refrigeration system also utilizes Dynamic Compressor Control (DCC) technology for precise cooling performance. The Eppendorf 5920R Refrigerated Centrifuge has a wide variety of rotors, buckets, and adapters available to spin all commonly used tubes, bottles, and plates. With high centrifugation speeds of up to 13,700 RPM (21,194 x g), the 5920R is certainly capable of suiting a large multitude of different applications. This centrifuge also features automatic rotor recognition along with imbalance detection for maximum operational safety. Please Note: This centrifuge includes the S-4x1000 Swing Bucket Rotor and Round Buckets, not the buckets and adapters depicted in the photo above. The included rotor reaches a maximum speed of 3,700 RPM (3,428 x g). Click Here to View Product Video INCLUDED: The Eppendorf 5920R Refrigerated Centrifuge includes: - S-4x1000 Rotor and Round Buckets - 1 Set of 5x50ml Adapters, Cat # 5825732006, Set of 2 - 1 Set of 14x15ml Adapters, Cat # 5825734009, Set of 2 - Operator's Guide - Power Cord - Full One Year Parts and Labor Warranty Eppendorf 5920R Centrifuge SpecificationsMaximum Speed13,700 RPM (3,700 RPM with included rotor)Maximum RCF21,194 x g (3,428 x g with included rotor)Maximum Capacity4 x 1000ml (4 x 1000ml with included rotor)Temperature Range-11°C to 40°CTimer10 seconds to 99:59 hours, continuousDimensions (W x D x H)29.2 x 27.8 x 15.9 in (74 x 71 x 40 cm)Weight306 lb.Electrical Requirements120V, 50/60HzComparison of ModelsSpecifications5424R w/ FA-45-24-115425R w/ FA-24x25427R w/ FA-45-30-115702R w/ A-4-385810R w/ A-4-625810R w/ A-4-815910 Ri w/ S-4xUniversal5920R w/ S-4x1000Max Speed (RPM)150001506016,220 (14,000 with rotor)440014,000 (4,000 with rotor)14,000 (4,000 with rotor)14,000 (4,500 with rotor)13,700 (3,700 with rotor)Max RCF (x g)211302130025,001 (20,817 with rotor)300020,800 (3,200 with rotor)20,800 (3,200 with rotor)22,132 (3,849 with rotor)21,194 (3,428 with rotor)Capacity24 x 2.0 ml24 x 1.5/2.0 ml, 10 x 5.0 ml48 x 1.5/2.0 ml (30 x 1.5/2.0 ml with rotor)4 x 100 ml4 x 400ml (4 x 250ml with rotor)4 x 400ml (4 x 250ml with rotor)4 x 1000ml4 x 1000ml (4 x 1000ml with rotor)Temperature Range-10°C to +40°C-10°C to +40°C-11°C to +40°C-9°C to +40°C-9°C to +40°C-9°C to +40°C-11°C to +40°C-11°C to +40°CTimer30s to 9:59h10s to 9:59h10s to 9:59h1 to 99 min1 to 99 min1 to 99 min10s to 99h 59m10s to 99:59hDimensions (WxDxH)9.30 x 12.60 x 8.94 in11.42 x 18.9 x 10.24 in12.6 x 21.3 x 10 in380 x 580 x 265mm24 x 28 x 13 in24 x 28 x 13 in28.3 x 25.9 x 14.5 in29.2 x 27.8 x 15.9 inWeight21 kg46.3 lb (21 kg)66.1 lb (30 kg)36 kg218 lbs218 lbs240.3 lb (109 kg)306 lbPower Requirements120V, 50-60 Hz120V, 50/60Hz, 3.2A, 360W120V, 50/60Hz, 4.6A, 550W120V, 50-60 Hz120V, 50/60Hz, 20A120V, 50/60Hz, 20A120V, 60Hz, 12A120V, 50/60Hz.comparison-table tr td:nth-child(9) { background-color: #fffacd; }

Maximum capacity: 4 x 290 ml Maximum permissible density: 1.2 kg/dm³ Maximum speed: 15000 rpm Maximu (more)m acceleration: 24400 RCF Maximum kinetic energy: 18500 Nm Dimensions (WxDxH): 457 x 600 x 418 mm Weight: 51kg Equipped with: 1x Hettich 1798 swing-out rotor (max 4000 rpm) 4x Hettich 5268 insert (12 positions, ØxD: 13 x 52 mm) 2x Hettich insert (12 positions, ØxD: 17 x 82 mm)

This Stratagene MX3000P Multiplex Quantitative RT- PCR System was removed from a university lab wher (more)e it was surplus to requirements. The main unit is in reasonably good, used cosmetic condition but it does have some scrapes, scratches and marks from use. The unit powers up and both Green LEDs light. You can also feel the well block heating up. The well block is 96 hole. The system includes: 1 x Agilent Stratagene MX3000P. (various marks from use)1 x Dell Optiplex755 PC with keyboard & mouse.1 x Monitor. (various marks from use)1 x VGA Cable.1 x RS232 Cable. The PC is running a fresh install of Windows 7. Installed is a copy of Stratagene MxPro - Mx3000P v4.10 build 389.The software will control the Mx3000P unit. We have run a basic heat cycle with it and verified that the lamp will turn on & off. It has not been tested any further.

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-37279 2x Bio-Rad model 3000XiITEM-37280 PTI Warp Drive MCS-3400ITEM-37283 LKB 2212 HeliracITEM-37284 Hanna HI 2211 pH/ORP MeterITEM-37285 Grant W6 Water BathITEM-37286 Chemlab model-N18ITEM-37287 Jenway 3505 pH MeterITEM-37288 Savant PS 250ITEM-37290 HaakeBuchler Polystatic PumpITEM-37292 Pharmacia Fine Chemicals Electrophoresis power supply eps 500/400ITEM-44595 Kern DE 300K/100N Weighing ScalesITEM-45226 16x Metal Freezer RackingITEM-45249 2x Boxes of Polysterine packagingITEM-45252 Proline Microchef Microwave ST44ITEM-45254 Stuart S150 Rolling IncubatorITEM-45403 Delta Sonic BathITEM-45404 Roto-Shake GenieITEM-45405 UVP Dual Intensity Ultraviolet TransilluminatorITEM-45406 kodak gbx-2 safelight filterITEM-45407 Thermo Fisher Scientific Clamp For Test Tube 4-1027-CMCITEM-45408 1XPT100 ProbeITEM-45409 Techne Tempette Junior TE-8J Heated Circulating Water BathITEM-45410 TOYO MS-I6B Mini StirrerITEM-45411 Ilford Darkroom Safelight Photo Processing LightITEM-45412 2 x Helis Bio BottlesITEM-45419 Olympus 10.4/ 4x SliderITEM-45420 5 x small centrifugal tube holdersITEM-45421 CAPP CRP-412X Lab Plate ShakerITEM-45425 Vacuubrand Membran-Vakuumpumpe ME2

Fridge temperature range: 2°C to 20°C Fridge volume: 189 L Freezer temperature range: -5°C to -25°C  (more)Freezer capacity: 104 L Dimensions (WxDxH): 595 x 640 x 2191 mm Explosion proof Possible options can be ordered at extra cost (see image)

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database – access to databases Function – access to basic functions F1 and F2 – programmable function keys and menu navigation keys Reports – access to database of drying process reports Profile – access to parameters settings Sample – access to products database