Axygen Mini Plate Spinner Centrifuge

This listing is for a Grant Instruments LMC-3000 CentrifugeThe Grant LMC-3000 is a low speed benchto (more)p centrifuge ideal for biomedical applications.

Manufacturer: Beckman Coulter Model: J-26S XP BioSafe Three-Phase Description: The J-26S X sets the  (more)standard for performance, including high speed, low heat dissipation, imbalance tolerance and low noise level, and its wide range of separation capabilities is extended even further, now including three-phase filtration that further separates airlock material into solids, liquids and gases. The addition of a High Efficiency Particle Arrestance (HEPA) filter set makes the unit bio-safe. The J-26S XP centrifuge features a more impact-resistant lid, full containment barrier and automatic rotor detection. The ergonomic design - with lower unit height and hands-free door operation - remains unchanged. The J-265 XP can process six liters of fermentor output in less than 10 minutes, deliver a subcellular fraction at 82,000 x g, and run 24 microplates simultaneously. The unit automatically detects which rotor is installed and prevents the rotor from exceeding its maximum speed. It enables faster, quieter and more energy-efficient operation with better temperature control. The exclusive, high-torque SR (Switched Reluctance) drive reduces cycle times. Core features: - Processing six liters of digester output in less than 10 minutes. - Deliver a subcellular fraction at 82,000 x g - Run 24 microplates at once - Separate live cell populations with elutriation - Sterile filters prevent the escape of infectious material Specifications: Maximum speed: 26,000 rpm Acceleration: Maximum, slow or timed (1-10 minutes, 0-500 rpm). Deceleration: Maximum, Slow, Timed (1-10 minutes from 500-0 rpm) or Off Maximum capacity volume range: 1 - 6 L Refrigeration system: CFC-free, non-ozone depleting refrigerant Temperature range(s): 10°C - 40°C in 1 degree increments Weight: 290kg Dimensions (W x H x D): 71cm x 86cm x 86cm Power requirements: 220/380 VAC, 50 Hz, 3 phases Humidity restrictions:< 95% (non-condensing) Scope of delivery: - J-26S XP BioSafe Three-Phase without rotor - Instruction manual as PDF via e-mail If you need a suitable rotor, we are happy to help! The unit is in absolute top condition and has been 100% function tested.

This Thermo Heraeus Pico 17 Centrifuge was removed from a university lab where it was surplus to req (more)uirements. The unit powers up and is in good working order up to the max of 13000rpm. It is in good cosmetic condition with minor marks from use. Thermo Heraus Pico 17 CentrifugeModel#: Pico 17Serial#: 40638289Manf: 2006 Thermo 75003424 Fixed Angle RotorModel#: 75003424Holds 24 x 1.5/2ml Tubes.Max 14800rpmIt also comes with the original Allen key used to tighten the Rotor.

Sanyo MSE Harrier 18/80 Refrigerated Centrifuge This was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and runs well to 6000rpm. It also cools and incubates as it should. It is in good cosmetic condition with minor marks. It is supplied with;MSE Rotor 43124-141SN - 7962Max RPM - 6000 4 x Buckets4 x Beige Adaptors hold 1 x 50ml tube each

MARSHALL Select MS-CE6000 Benchtop Centrifuge, 6,000 RPM Maximum Speed 6,000 RPM Maximum RCF 4,387  (more)x g Maximum Capacity 4 x 500ml Features - All-metal construction with multi-layer explosion-proof design for safety and durability - Maintenance-free DC brushless motor ensures stable, low-noise operation - 5-inch LCD touch screen with multilingual support, including customizable options - Electromechanical integration door lock and food-grade silicone sealing for safety - Advanced safety features: self-test, blocking, overspeed, and overtemperature alarms - User-friendly interface with intuitive operation and real-time parameter display - Multiple user-defined program settings with memory for the last used program - Supports a variety of rotors and adapters for 0.2 ml to 750 ml tubes - Compact dimensions make this centrifuge suitable for benchtop use The MARSHALL Select MS-CE6000 Benchtop Centrifuge offers a robust and reliable solution for laboratory centrifugation needs. With a maximum speed of 6,000 RPM and a maximum RCF of 4,387 x g, it can accommodate up to 4 x 500 ml samples, making it versatile for various applications. Its all-metal construction with a multi-layer explosion-proof design ensures operator safety and durability. Driven by a maintenance-free DC brushless motor, the centrifuge provides stable, low-noise operation at less than 65 dB(A). The user-friendly interface features a 5-inch LCD touch screen with support for multiple languages. It offers electromechanical integrated door locking for enhanced safety and a food-grade silicone sealing ring to prevent aerosol overflow. The centrifuge includes advanced safety features such as self-test, blocking, overspeed, and overtemperature alarms. Its design supports various angle rotors and adapters for 0.2 ml to 750 ml tubes, making it adaptable to diverse laboratory needs. Additionally, the system allows for user-defined programs and remembers the last used settings for convenience, with timer settings from 1 second to 99 minutes and 59 seconds. Overall, the MARSHALL Select MS-CE6000 is a versatile and secure choice for laboratories seeking efficient and reliable centrifugation. INCLUDED: The MARSHALL Select MS-CE6000 Benchtop Centrifuge, 6,000 RPM includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hermle Compact Hematocrit Centrifuge Due to its compact design the Z207-H Hematocrit Centrifuge is t (more)he perfect centrifuge for even the smallest of lab spaces. It is equipped with a hematocrit rotor for 24 x capillaries. Accompanied by Hermle’s easy to use control panel , the unique EZ-Scroll™ touch pad, gives you ease of control and a modern feel. An advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf in increments of 10. In addition to retrieving saved programs, the easy to use front panel can be used to adjust accel/decel rates, run time, and change the end of run alarm tone. There is also a momentary spin function that will run while the button is pressed. Additionally the Z207-H features a sleep mode to save energy by shutting off after a certain time if not being used while on, which can be toggled on or off easily. INCLUDED: The Hermle Compact Hematocrit Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Malvern Panalytical Viscosizer TD is an automated biophysical characterization tool utilizing Taylor (more) Dispersion Analysis and providing ultra-low volume, solution-based molecular size and stability measurement capabilities, combined with Poiseuille flow for relative viscosity assessment. Viscosizer TD offers biopharmaceutical researchers an orthogonal technique for conformational stability analysis, which is unrivaled in extending into label-free measurements in highly complex solutions, and encompasses a critical size range from small molecules through to protein-based systems. Light source: Pulsed xenon lamp Wavelength filter: 254 nm UV Beam wavelength: 190 to 1100 nm Band pass: 10 nm Injection modes: Hydrodynamic injection Pressure features: On inlet only Flushing pressure: 0 to 3000 mbar Temperature control: Samples and buffer cooling, 4°C to 40°C Equipped with a VSR2009-0384 uncoated capillary Internal diameter: 75.6 µm Length to end of window 1: 450 mm Length to end of window 2: 850 mm Total length: 1300 mm

Riello Model S3T 20 XTD T5 Lab This item was removed from a university where it was surplus to requi (more)rement. It is in reasonably good cosmetic condition, but we are unable to power it on as it was originally hard wired and as a result, it does not include a plug. Therefore, it is listed as Spares/Repair and would require a plug attached to attempt to power it on.

Template input incorrectly - Listed as Used and not S/R Varian Cary 500 Scan UV-VIS-NIR Spectrophoto (more)meter with PC and Monitor This system was removed from a university laboratory where it was surplus to requirements. The spectrophotometer powers on, communicates with the PC, and is in good condition with minimal wear. However, multiple error messages are displayed during operation. Therefore, it is listed as Spares/Repair. The previous client has also confirmed that the system was not operational when last used. Error Messages Displayed: - SEQFatal Chopper Failure – Reported during calibration - CCTVis Lamp Failure – Vis lamp has failed; restarting the unit did not resolve the issue, suggesting a replacement may be necessary - CHGVis Source Failure – Reported by the instrument software - NMPDatum Not Found – Re-powering suggested, though the issue persists Software Included (WinUV Folder): - Align - Cary Help - Scan - Simple Reads Additional Components: - Dan PC - Model: Dantum - Serial No.: 428199-1 - Condition: Powers on, good condition with some wear. - Monitor (Lenovo ThinkVision) - Serial No.: VN722039 - Condition: Powers on, great condition with no wear. Spectrophotometer Specifications:- Model: Cary 500 Scan - Serial No.: EL97123060

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don&rsquo;t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what&rsquo;s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7&rdquo; graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator&rsquo;s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.