Angular rotor for centrifuge F45-36-8 EPPENDORF

Centrifuge FC5513-K, Frontier™ 5000 Ohaus, with rotor Designed to be comfortable and practical, Fron (more)tier Micro centrifuges feature an intuitive control interface that is easy to operate even when wearing gloves. Micro centrifuges save valuable bench space by integrating all of their functionality into a small footprint. Frontier Micro centrifuges offer high-speed operation for a range of essential laboratory applications, such as DNA/RNA preparation, ultrafiltration and more. Additionally, biocontainment rotors allow for research with hazardous samples. The equipment is completed by a silent brushless motor, high sample productivity, multi-safety control, customized programs. Included in the FC5513-K model you will get the angle rotor with maximum capacity of 24 x 1.5 / 2.0ml. Features: Maximum relative centrifugal force (x g) at 17,317 g; maximum speed 13,500 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 85 mm; 45° angle. You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. ELEGANT AND PRACTICAL DESIGN - Simple and modern interface, to set parameters easily - The display shows both the set and real parameters - Clear and right display STRUCTURE AND FUNCTIONALITY - The panel is splash proof to protect the centrifuge from accidental sample spills - The maintenance-free induction motor produces G-force max. of 17317×g - Speed ​​up to 13500 rpm in less than 15 seconds (with microtubes) - 10 acceleration/deceleration settings - 99 memory sets for quick storage and easy recall of used parameters - Rotor imbalance detection systems shut down the unit when loads are out of balance TECHNICAL FEATURES Speed ​​range: 200 rpm - 13,500 rpm Maximum relative centrifugal force: 17,317 g Maximum flow rate (rotor): 24 x 1.5 / 2.0ml Program memories: 99 Rotor Packaging: Angled Rotor: 24 x 1.5 / 2.0ml Acceleration gear: 10 Deceleration gear: 10 Lid lock: mechanical Noise level: ≤60 ± 2 dB (A) Pre-refrigeration time: not applicable Rotor Compatibility: Angled 24 x 1.5ml / 2.0ml; angled 24 x 1.5ml / 2.0ml sealable; Hematocrit rotor, 24 x capillaries; corner 18x2ml spin columns Rotor recognition method: manual Execution time: quick rotation; 10 seconds to 99 hours 59 minutes 59 seconds; Continuous Safety certification: CE; FCC

Max speed: 28000 rpm Max RCF: 51710 xg Acceleration: 9 stepped, reproducible profiles Braking: 9 ste (more)pped, reproducible profiles and unbraked deceleration Temperature control: 0°C to 40°C Dimensions (HxWxD): 358 x 540 x 600 mm Weight: 100 kg Equipped with: Heraeus 3740 fixed angle rotor Max speed 28000 rpm Capacity 12x 1.5 mL

This Sorvall SLC-4000 Fixed Angle Centrifuge Rotor PTI F9S-4x1000 was removed from a university lab  (more)where it was surplus to requirements. The unit is in good cosmetic condition with only minor marks from use, though it has not been tested and will need to be inspected by a qualified engineer before it is used again. Specs;7,000rpm9,220 x gHolds: 4 X 100ml

Beckman Optima XL100K Ultracentrifuge Lab This item was removed from a university where it was surpl (more)us to requirement. It is in good cosmetic condition and in good working order. Also includes the following: Sorvall AH-629 Rotor RPS40T-832 Rotor Neither rotor includes the vial buckets.

Benchmark C2212 MyFuge 12 Plus Digital Mini Centrifuge w/ Combination Rotor The unique rotor design  (more)of the new MyFuge 12 Plus eliminates the need to switch rotors (or use a separate centrifuge) when changing between microtubes and PCR strips. The included, COMBI-Rotor allows for simultaneous centrifugation of up to 12 microtubes and/or 4 PCR strips.In addition, the MyFuge 12 Plus features a large digital display with adjustable speed (up to 7,000 rpm) and a digital timer. With built in rcf conversion, speed can be set/displayed in rpm or rcf.The MyFuge 12 Plus combines power with intuitive functionality making it the perfect companion in any laboratory.INCLUDED: The Benchmark C2212 MyFuge 12 Plus Digital Mini Centrifuge w/ Combination Rotor includes: - Power Cord - COMBI Rotor - Two Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

MORE DETAILS TO FOLLOW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.