Thermo Sorvall Dupont TFT 50.38 Fixed Angle Rotor 12x38,5 ml 50K rpm WX Beckman

Eppendorf A-4-62Swing Bucket Rotor (buckets not included) for 5810/R The Eppendorf A-4-62 Rotor is a (more)n all-in-one swinging bucketrotor with a maximum speed of 4,000 rpm and RCFof 3,200 x g. The A-4-62 has awide range of adapters available to accommodate varying tube sizes. This rotoris used with Eppendorf centrifuge models 5810 and 5810R. Buckets are not included. INCLUDED: The Eppendorf A-4-62 Swing Bucket Rotor for 5810/R includes: - Full 1 Year Parts and Labor Warranty Eppendorf A-4-62 Rotor SpecificationsMax Rotational Speed4,000 rpmMax RCF3,200 x gCapacity4 x 250 mlCompatibilityEppendorf 5810/ 5810RAutoclavable121°C for 20 min

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The 'F' PREMIUM series plasma freezers are instruments of the highest quality and with state-of-the- (more)art functionality. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. ACCURATE TEMPERATURE AND GUARDED 24 HOURS - Controlled air cooling system for uniform and stable temperature distribution - Automatic defrost with stable temperature maintenance - Rapid recovery of the temperature even after numerous door openings - Safety thermostat to prevent freezing - Long autonomy in case of power failure - Acoustic and visual alarms with remote notification via SMS or email - °B Connected universal software for remote archive, report (FDA 21 CFR Part 1 compliant EFFICIENCY - US SNAP and F-GAS compliant high efficiency natural gas - High performance and low consumption compressor - Polypropylene chassis with one-piece print guaranteed for life against corrosion and fully recyclable CONVENIENCE - Easy access to parameters via 7' touch-screen - Card reader for reserved entrance or with password - Data export via USB or card reader - Anti-bacterial coating for the best cleaning - Low noise - Low heat emission - Modular internal equipment - Easy access to internal drawers-trays - Highest quality stainless steel - Set Point -41°C F701 plasma freezer - Storage capacity (350ml plasma bags): 575 - Cold/hot temperature alarm limit: -46°C / -32°C - Medical Device according to MDR (EU) 2017/745, Class IIa - Multifunction electronics with 0.1°C touchscreen display and monitoring software - Wide range of functions and accessories MULTIFUNCTION ELECTRONICS FOR MAXIMUM RELIABILITY - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery OPTIMIZED DESIGN FOR ENERGY EFFICIENCY - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum STRUCTURE IMPROVED AND BUILT FOR EVERLASTING DURABILITY - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B Class ISO 5 / EC GMP A

Thermo Scientific Robotics Enclosure Cabinet S-MAS9036-000-00 Lab This enclosure was removed from a  (more)university where it was surplus to requirement. This listing is the enclosure only and does not include the tables it sits on. Refer to the red highlight featured on the diagram. It originally housed a Thermo Scientific™ Spinnaker™ Microplate Robot System which is not included. The measurements for the assembled enclosure are as follows: Length x 448cmWidth x 152cmHeight x 118cm This item includes various brackets and fixings as seen, but we are unable to confirm if all the required items are included.

Industrial Workbench with Drawer and Shelving This item was removed from a university lab where it w (more)as surplus to requirements. The workbench is well-used, showing signs of wear typical of an industrial or workshop setting. It has served as a welding station and includes a protective cover, though this is in poor condition and displays holes from where a vice was previously fitted. The drawer opens stiffly, and the surface has scratches and marks from usage. Specifications:- Tabletop/Work Area Dimensions: 184 cm x 76 cm - Back Shelf: 183 cm x 9.5 cm - Bottom Storage Area: 137 cm x 63 cm

Hermle Z496-1L-A250F 250ml Conical Bottle Insert for Z496-1000-1L, 2/pk The Hermle Z496-1L-A250F 250 (more)ml Conical Bottle Insert for Z496-1000-1L, 2/pk is for use with the Z496-1000-AC Swing Out Rotor and includes two 250ml conical bottle adapters. INCLUDED: The Hermle Z496-1L-A250F 250ml Conical Bottle Insert for Z496-1000-1L, 2/pk includes: - 1 x 250ml adapters, 2 per pack - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

F1 class mass standards are exceptional measuring tools that represent the pinnacle of precision in  (more)the field of metrology. Classified as F1 metrology class, they are perfect for advanced applications where every detail of measurement is of paramount importance. F1 mass standard: flat polygonal sheet Nominal value: 2 mg Material: aluminum F1 Class Mass Standards – Key Features Highest Precision and Accuracy - F1 class mass standards are characterized by absolute measurement precision and extraordinary accuracy. They are designed to meet the most stringent standards for acceptable deviation from actual weight. Stability under Difficult Conditions - An important feature of F1 class mass standards is their ability to maintain measurement stability even under harsh environmental conditions. The standards of this class are resistant to changes in temperature, humidity and other factors that affect the precision of measurements. Calibration in Accordance with International Standards - The calibration process for F1-class mass standards is rigorous and in accordance with international standards. This ensures that standards of this class are globally recognized and can be used in different countries. Specialized Construction Materials - F1-class standards are often made of materials with unique physical properties. This provides them not only with precision, but also with durability and wear resistance. Application 1. Industrial Metrology F1 class mass standards are used in metrology laboratories engaged in the testing and maintenance of measurement standards. 2. Scientific Research In scientific research, especially in high-precision fields such as physics and astronomy, F1-class mass standards are a key tool. 3. Aerospace Industry In the precision mass measurements required by the aerospace industry, F1-class standards guarantee reliability and accuracy. 4. Calibration Laboratories In calibration laboratories where uniformity and precision are a priority, F1-class mass standards are the standard of excellence. F1-class mass standards are synonymous with the highest quality and precision in the field of metrology. Their use is crucial where even the slightest deviation from the standard can carry unpleasant consequences. They are tools for advanced applications that contribute to raising standards in the field of mass measurement.

The Scale Editor 2.1 software is used for managing databases of RADWAG balances and scales via RS232 (more) and Ethernet communication interfaces. The software works with the following equipment: Laboratory Balances of the AS X2, PS X2, WLC X2 series, Standard-class balances and scales of the WTC, WLC, C315, H315 series, Advanced-class scales of the C32, HX7, HX5.EX series. Professional-class balances and scales of the HY10, WLY, WPY, 4Y, 5Y series. MWSH, MWMH, MWLH industrial modules. Main features: Editing database tables. Export of databases and reports to Excel, txt, pdf files. Export of databases and reports to a csv file. Import of databases from a csv file. Printouts configuration of standard-class balances and scales. Configuration of the Wi-Fi® module of standard-class balances and scales. Configuration of the Ethernet module of standard-class balances and scales. CAUTION! We do not sell packaging version of the software.