Thermo Scientific TX-750 Swing Bucket Rotor, Cat. # 75003607

Beckman Coulter SW 55 Ti Rotor This item was removed from a university laboratory where it was surpl (more)us to requirements. The rotor is in good cosmetic condition and is designed for a maximum speed of 55,000 RPM. Specifications:- Max RPM: 55,000 - Serial No.: 14E 0512

Piramoon Technologies FiberLite F15-6x100 15,000rpm 24,700g Centrifuge Rotor This was removed from  (more)a university lab where it was surplus to requirements. The item is in very good cosmetic condition and also includes its original carry case and Carbon Fiber Rotor Care Kit for this specific model. Items features are as follows:15000rpm24,700 X G6x 100ml tube holdersQuick release autolock

VWR Galaxy Miniarray minicentrifuge. Speed of 4,000 rpm. Capacity for 2 microarray slides. Specifica (more)tions: 230 V; 50-60 Hz

Eppendorf S-4-72 Swing Bucket Rotor with 250ml Buckets The Eppendorf S-4-72 Swing Bucket Rotor with  (more)250ml Buckets, (Catalog #: 5804746007) is a medium capacity swing-bucket rotor with speeds up to 4,200 RPM and a maximum RCF of 3,234 x g. The S-4-72 Buckets can accept a broad range of adapters to handle all common tube formats from 0.2ml to 250ml. This rotor is designed for use with the Eppendorf 5804/R and 5810/R Centrifuges. The Eppendorf S-4-72 Swing Bucket Rotor with 250ml Buckets are in their original box and in new condition. (Please Note: The adapters pictured above are NOT INCLUDED. Please refer to the Additional Product Accessories section above if you may require adapters). INCLUDED: The Eppendorf S-4-72 Swing Bucket Rotor with 250ml Buckets includes: - S-4-72 Swing Bucket Rotor - 4 x 250ml Round Buckets - Full 1 Year Parts and Labor Warranty Eppendorf S-4-72 Swing Bucket Rotor with 250ml Buckets SpecificationsMaximum Speed4,200 RPMMaximum RCF3,234 x gMaximum Capacity4 x 250mlRadius16.4 cmCentrifuge CompatibilityEppendorf 5804/R and 5810R CentrifugesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

Eppendorf A-2-DWP-AT Microplate Rotor & Buckets The Eppendorf A-2-DWP-AT Microplate Rotor &  (more)Buckets features two deepwell-plate buckets, which can each hold up to two plates for simultaneous processing of up to 192 samples. Reaches speeds of 4,500 RPM with a max RCF of 3,486 x g. This rotor can accommodate MTP, DWP, or filtration plate kits. The A-2-DWP-AT can only be used with Eppendorf centrifuge models 5810, or 5810R. INCLUDED: The Eppendorf Swing Bucket A-4-38 Rotor includes: - 2 Deep Well Plate Buckets - Full 1 Year Parts and Labor Warranty Eppendorf A-2-DWP-AT Microplate Rotor & Buckets SpecificationsMax Rotational Speed4,500 rpmMax RCF3,486 x gMax Capacity2 x 6 MTP; 2 x 2 DWP; 2 x 1 filtration plate kitsAutoclavable121°C for 20 minutesCompatibilityEppendorf 5810, and 5810R

Memmert IPP1400eco Peltier-Cooled Forced Circulation Incubator 1360L, 115V Temperature Range 0°C (a (more)t least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1360L (48.0 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP1400eco Peltier-Cooled Forced Circulation Incubator 1360L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP1400eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP1400eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP1400eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1400eco Peltier-Cooled Forced Circulation Incubator 1360L, 115V includes: - 4 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Benchmark H5100-02 96 Well PCR plate or 96 x 0.2ml Block for MultiTherm Touch The Benchmark H5100-02 (more) 96 Well PCR plate or 96 x 0.2ml Block for MultiTherm Touch is designed for use with the Benchmark H5100-HCT MultiTherm Touch Heating and Cooling Shaker. The H5100-02 is compatible with the H5100-HL Heated Lid. INCLUDED: The Benchmark H5100-02 96 Well PCR plate or 96 x 0.2ml Block for MultiTherm Touch includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

S+B End Sink cabinet Ice blue 425x600x910

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW