Thermo Scientific TX-200 Swing Bucket Rotor with Round Buckets

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Sorvall SS-34 centrifuge rotor. Capacity of 8 x 50mL. Max. speed 25,000rpm; max. RCF 50,228 x g. Ang (more)le 34°. Tube Diameter 29mm. Compatible with Sorvall RC-5, RC-5B, RC-5B Plus, RC-5C, RC-5C Plus, RC6c Plus, and RC-26 Plus centrifuges.

Beckman Tube Sealer applies heat to the cap of the centrifuge tube to create an airtight seal for st (more)orage and transport. It presents some deterioration due to rust in the lower part that does not influence its operation. Includes two tube racks to be positioned along the guided rail for higher performance operation. Gift ultracentrifuge tubes. User manual.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Revco Habitat CO2 Water Jacketed Incubator Model no. RCO3500TWBB was removed from a univer (more)sity lab where it was surplus to requirements. The unit has been fully tested and recertified by a qualified service engineer. The report is available on request if you would like to see it. The unit has a water jacket that will require a top-up on installation. The unit will require 8-10 hours to stabilise once installed. It is in excellent cosmetic condition with some minor marks from use. 4 Shelves - 49.5 x 49.5cm Internal dimensions - D52 W50 H55cm

Memmert IPP410eco Peltier-Cooled Forced Circulation Incubator 384L, 115V Setting Temperature Range  (more)Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 384 L (13.6 cu. ft.)cu.ft.) Features - 384 L (13.6 cu. ft.) volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Refrigerant-free design with Peltier cooling for maximum energy efficiency and environmentally friendly operation - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert HPP410eco Climate Chamber 384L, 115V offers precise climate control for a wide range of laboratory applications. With a 384-liter capacity and a temperature range from +5°C to +70°C (with humidity) or 0°C to +70°C (without humidity), this chamber provides versatile conditions for storage and incubation. Equipped with dual Pt100 sensors for accurate temperature control to 0.1°C, it ensures reliable performance and consistent environmental conditions. The adjustable humidity range from 10% to 90% RH, controlled by a hot steam generator and dehumidified by Peltier technology, allows for flexible climate simulation, making it ideal for sensitive samples. The TwinDISPLAY control system, powered by a PID microprocessor, ensures easy and precise adjustments, while the AtmoCONTROL software enables programmability via USB or Ethernet. Safety is a top priority, with the integrated AutoSAFETY system offering visual and acoustic alarms for over- and undertemperature protection. The durable stainless steel door with a 2-point locking system and an inner glass door provides secure access while maintaining energy efficiency. With a maximum chamber load of 440 lbs and support for up to 14 shelves, the HPP410eco delivers exceptional capacity and reliability for demanding laboratory environments. INCLUDED: The Memmert IPP410eco Peltier-Cooled Forced Circulation Incubator 384L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

IKA Roller 10 Basic ShakerRoller shaker with 10 rolls provides smooth rocking androlling action at a (more) fixed speed. Used for mixing blood samples, solid andliquid suspensions and viscous samples. The unit can be used with allconventional tubes and cylindrical bottles. Easily removable attachmentsprovide for quick cleaning in case of sample spills. - Usable at 4 to 50 °C in incubators - Suitable for continuous operation - Removable rolls enable shaking of larger tubes - Easy operation with touch keypad - Shaking diameter: 24,5 mm (height) - Speed range: 30 rpm (fixed) INCLUDED: The IKA Roller 10 Basic Shaker includes: - ROLLER 10 Basic - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 1 Year Warranty Extension with IKA Registration) IKA Roller 10 Basic Shaker SpecificationsType of movementrollingPermissible ON time100 %Speed min.0 rpmSpeed fix30 rpmSpeed displaynoneTimer displaynoneOperating mode continuous operationRolls, number 10Rolls, Ø 32 mmRolls, length327 mmWorking area length350 mmRolls, luffing angle fixed3 °Rolls, max stroke at roll end16 mmRolls, changeable, removableyesDimensions (W x H x D)380 x 115 x 545 mmWeight8.242 kgPermissible ambient temperature4 - 50 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage100 - 240 VFrequency50/60 HzPower input24 WDC Voltage24 VCurrent consumption1000 mAComparison of ModelsSpecificationIKA Roller 10 BasicIKA Roller 10 DigitalIKA Roller 6 BasicIKA Roller 6 DigitalType of MovementRollingRollingRollingRollingSpeed Range30 rpm (fixed)5 - 80 rpm30 rpm (fixed)5 - 80 rpmTimerNoYesNoYesNumber of Rolls101066Rolls Diameter32 mm32 mm32 mm32 mmRolls Length327 mm327 mm327 mm327 mmWorking Area Length350 mm350 mm350 mm350 mmDimensions (W x H x D)380 x 115 x 545 mm380 x 115 x 545 mm240 x 115 x 545 mm240 x 115 x 545 mmVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

IKA MF 10.2 Mill Impact Grinding Head For crushing brittle, hard materials such as minerals, buildi (more)ng materials up to Mohs hardness 6. Before being discharged, the ground material passes through a sieve. This sieve is interchangeable and available in different hole sizes (not incl. with delivery). The ground material can then be collected using an NS 29 standard ground vessel. INCLUDED: The IKA MF 10.2 Mill Impact Grinding Head includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty IKA MF 10.2 Mill Impact Grinding Head Specifications Process typeinlineCircumferential speed max.34 m/sFeed hardness max.6 MohsFeed grain size max.10 mmMaterial milling chamberstainless steel 1.4308Mill feed can be cooled in milling chamber with dry iceyesDimensions (W x H x D)320 x 450 x 300 mmWeight2.942 kgRequest a Formal Quote