Sorvall TH-641 Swinging Bucket Rotor 41,000 Max RPM with 4 x Buckets Lab

BECKMAN COULTER JA-25.50 Aluminum Fixed Angle Rotor Fixed Angle Rotor Max: 25,000 rpm, 75,600 x g Ca (more)pacity: 8 x 50 mL Nominal Capacity: 3,000 mL Biosafety Lid For use with Avanti J-Series and J2-Series Centrifuges (except J-21 Series)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Eppendorf 1 x 50ml Falcon Adapters, Cat. # 022639226 New in box Eppendorf 1 x 50ml Falcon Adapters ( (more)Cat. # 022639226) for round 85ml buckets for 5702 / 5702 R / 5702 RH centrifuges. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 1 x 50ml Falcon Adapters, Cat. # 022639226 includes: - Full 6 Month Parts and Labor Warranty

Manufacturer: PFI Systems Model: Fumigation Boiler / Bath Key Facts: - Max Volume 250ml- 230V 50/60H (more)z Items delivered: - Fumigation Boiler The fumigation boiler is in good cosmetic condition and 100% functional tested.

Thermoregulation and thermal stability at their best The Auto-Tuning thermoregulation system guarant (more)ees excellent thermal homogeneity and stability (±0.5°C). Ecological cooling system and low operating costs. Selectable incubation temperature and working range from 3 to 50°C. Uniform temperature thanks to VELP ventilation technology. 3-digit DIGITAL DISPLAY, resolution 0.1°C. - Transparent internal door for observation of the sample without temperature alterations Reliable and easy to control Volume of 109 liters net. Internal sockets to power devices. Intuitive digital interface, with three buttons for easy setup of the instrument. Constant monitoring according to GLP (Good Laboratory Practice). Adjustable recording time (in case of connection to VELP Ermes and TempSoft™). The optional TempSoft ™ incorporates high / low alarm thresholds. Quick and easy calibration. In the photo: the interior of the FOC 120E model, with the two electrical sockets, forced ventilation and the 6-position system for BOD Sensor Velp analysis; the control panel with the clear digital display to the tenth of a degree; the transparent internal door. Our life is connected, giving us previously unimaginable possibilities, why not connect your laboratory too? Improved productivity and safety; sharing analysis and assistance in a few clicks! Monitor your instrument anytime, anywhere with VELP Ermes Thanks to Velp Ermes you will no longer need cables. Discover the platform that allows you to reduce repetitive manual tasks with real-time control of your FOC Connect wherever you are. Access the data recording of your instrument wherever you are, in total safety, through the VELP Ermes platform and benefit from software updates and immediate ad hoc assistance, without the need for specialized technicians. Immediate notifications and alerts will allow you to always be informed about the status of your analyzes, improving productivity and reproducibility. The Ermes cloud subscription, which allows you to connect up to 10 instruments, is available for 1 or 3 years and must be ordered separately. IN OPTION! Control your FOC Connect via TEMPSoft ™ software Through the optional TEMPSoft ™ software and the relative connection of the FOC Connect to the PC, you can: - Control up to 10 FOC Connects. - Set the work ramps (different times and temperatures) and the desired setpoint, with the possibility of minimum and maximum temperature alarm thresholds - Monitor the internal temperature with dedicated graphics - Export data in multiple formats - Store test data in accordance with GLP (Good Laboratory Practice) FOC Connect is supplied with the MODBUS communication protocol.

The unit was removed from a university lab. It has not been tested at our facility. This job lot of  (more)items comes from a university lab, The items were no longer required. None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; Enraf Nonius Goniometer Control UnitType 0590.821Serial No. 042 Enraf Nonius main processing unitType 1546.801Serial No. 19-19 Jobin Yvon Horiba PC without HDD Bruker Nonius X-Ray ControlType 1590.830Serial 24-04 Enraf Nonius Delft x-ray station with Thomson Tubes X-Ray Head Enraf Nonius Pocket TerminalSerial No. 69786R 2 x Huber mechanical adjusting blocksPart Nos. D83253 D8219 4 x Software disks Cad4- PC Software V1.5c 3.5 Connecting cables and data leads

Samples and applications - Preparation of foamy mixtures (ice cream, butter, margarine, icing) and s (more)preadable creams    - Preparation of tablet coatings - Preparation of ointments and pharmaceutical creams - Preparation of cosmetics (lip balm, soap, shampoo, conditioner, creams, lipstick, mascara) - Preparation of pigments, inks and paints - Preparation of biodiesel - Dispersion of petroleum derivatives (e.g. asphalt) TECHNICAL DATA - Rotor diameter: 18 mm - Stator diameter: 25 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 100 - 2,500 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 23.6 m/s - Ultimate fineness, emulsions: 1-5 µm - Ultimate fineness, suspensions: 5-25 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

Eppendorf 26 x 1.5/2.0ml Adapters, Cat. # 5804794001 The Eppendorf 26 x 1.5/2.0ml Adapters, Cat. # 5 (more)804794001 are for use with the Eppendorf S-4-72 Swing Bucket Rotor for the Eppendorf 5804/R and 5810/R Centrifuges. These adapters feature a capacity for 26 x 1.5/2.0ml tubes each with the maximum tube dimensions (Diameter x Height) of 11mm x 43mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 26 x 1.5/2.0ml Adapters, Cat. # 5804794001 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 26 x 1.5/2.0ml Adapters, Cat. # 5804794001 SpecificationsBottom ShapeFlatRotor CompatibilityEppendorf S-4-72 Swing Bucket Rotor