Jouan B 4i

Fiberlite F18-8x50cy Fixed Angle Rotor THERMO SCIENTIFIC New equipment in its original packaging The (more)rmo reference: 75003663 Capacity: 8 x 50ml Max Speed : 14,500 rpm RCF Max: 24,446 ×g Compatible with models: Thermo Scientific Sorvall Legend XT/XF, Sorvall Legend X1, Multifuge X3/X3F, Multifuge X1 and SL 40F Centrifuges

SIGMA 11222 oscillating rotor with 2 rectangular buckets 13222 Max. plate height : 56mm Max speed (3 (more)-18KS / 3-18KHS): 3,000 rpm Max RCF (3-18KS / 3-18KHS): 1.218 x g Max load per support: 337 g Tmin at max speed. : <4°C Angle: 90°

This Sorvall H6000/HBB-6/HLR-6 5000rpm Swinging Bucket Rotor was removed from a university lab where (more) it was surplus to requirements. The unit is in good cosmetic condition but has not been tested. It will need inspecting for safety before it is used again. It will require a locking stud as this is not included. P/N 11238 It has 6 x 1000ML Buckets. P/N 44040 The rotor is rated for 5000rpm Max.

Turbomolecular vacuum pump Edwards EXT255H 24V. Pumping speed: 220 lit/sec. Inlet flange: ISO100. Ba (more)cking connection: KF25 Minimum size backing pump: 10CMH. Cooling: Water or Air. Edwards EXC 100 or EXC 120 Turbo Pump Controller is needed to operate the pump (excluded).

This was removed from. a university lab where it was surplus to requirements. It seems there are som (more)e parts missing. What is included is listed below; Table/Rack on wheelsDimensions - L111 W70 H62cm Fitted inside:-Carl Zeiss ECU-LSM 5 Live PC - Powers on but the Hard drive has been removed. Carl Zeiss LSM 510 META Laser Head Casing - The casing is in bits and it looks like there are parts missing Carl Zeiss Remote for LSM 510 R3.5/LSM 5 Live Box full of all the connection cables Keyboard &amp; Mouse Box of small parts/accessories including:-Software discs and Fujitsu Recovery DVD'sCarl Zeiss MicroImaging LSM 510 META 4.0 Software DongleSeveral USB CablesLots of small parts/accessories

Yamato FO-410CR Muffle Furnace with Communication Port 9L, 220V Operating Temperature Range 100°C t (more)o 1150°C Max. Temperature Reaching Time ~70min. Internal Capacity 9L Features - Easy-to-use controller - Communication ports - High-temperature accuracy at ±2.0°C - Upgraded with long life R-thermocouple sensors - Excellent heat tightness with a firmly sealed chamber door - Program operation of a maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns, or 10 steps x 3 patterns - Self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker, and automatic overheat prevention device Standard 9L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C. INCLUDED: The Yamato FO-410CR Muffle Furnace with Communication Port 9L, 220V includes: - Exhaust port cap 1 pc. - Power Cord - Operator's Manual - Manufacturer's Documentation - Year Manufacturer's Warranty

Memmert UN30plus Natural Convection Oven 32L, 115V Setting Temperature Range +20°C to +300°C Convec (more)tion Type Natural Convection Chamber Volume 32 L (1.1 cu. ft.) Features - 32L internal volume accommodates various sample sizes for lab versatility - TwinDISPLAY with dual high-definition TFT-color displays for precise control and monitoring - Temperature range from +20°C to +300°C with accuracy up to 99.9°C: 0.1, from 100°C: 0.5 - 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring and error prevention - Natural convection ensures uniform heat distribution for delicate samples - Pre-heated fresh air admixture with electronically adjustable air flap for consistent temperature control - Digital timer adjustable from 1 minute to 99 days for flexibility in lab processes - AutoSAFETY with over- and undertemperature monitoring to ensure protection and safe operation The Memmert UN30plus Natural Convection Oven 32L, 115V is a versatile and precision-engineered solution for temperature control in laboratory and industrial settings. With a 32L internal volume, this oven provides ample space for a variety of sample sizes while maintaining a temperature range from +20°C to +300°C. The oven’s advanced TwinDISPLAY system, featuring dual high-definition TFT-color displays, allows for precise monitoring and easy adjustments. Equipped with two Pt100 sensors in a 4-wire circuit, the UN30plus ensures consistent temperature accuracy, protecting your samples through mutual monitoring and error prevention. This oven also features natural convection for uniform heat distribution, ideal for delicate samples, along with a pre-heated fresh air admixture controlled by an adjustable air flap for optimal temperature stability. The digital timer, adjustable from 1 minute to 99 days, offers flexibility in various applications, while the AutoSAFETY system provides integrated over- and undertemperature protection for maximum safety. The easy-to-clean stainless steel interior, reinforced by ribbing, is corrosion-resistant, making the Memmert UN30plus both robust and reliable for continuous lab use. INCLUDED: TheMemmert UN30plus Natural Convection Oven 32L, 115V includes: - 1 x Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Four-sensor powder-coated platforms are a type of industrial scales that have four load cells (strai (more)n gauges) located in each corner of the platform, ensuring accurate measurements regardless of where the load is located on the platform. Application Four-sensor powder-coated platforms are ideal for industrial applications where precise and reliable measurements of heavy loads are needed. They can be used in warehouses, logistics centres, manufacturing plants, as well as in the food, chemical and pharmaceutical industries. Powder coating provides them with extra protection against harsh working conditions, which increases their service life and reliability. Use the potential Our platforms can work with one of as many as eight weighing terminals: PUE CY10, PUE H315, PUE C315, PUE C32, PUE 7.1, PUE HX7, PUE HY10, PUE 5.

Polyscience MX28P100-A11B 28L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60HzFeatures - (more) Large, universal icon and English display - On-screen prompts - Single-point calibration capability - Working temperatures from ambient +10° up to 150°C - DuraTop™ insulating, chemical-resistant top deck - Temperature stability of ±0.07°C - Controller displays internal bath temperature, set-point and more–all on one easy to read screen Three control buttons and plain-text on-screen prompts make the setup and operation of the MX Temperature Controller easy and straightforward. Redundant over-temperature protection, high and low temperature limits and alarms alert you instantly to conditions that fall outside normal operating parameters User-settable high-temperature safety provides over-temperature and low liquid level protection. Patented, integrated design protects pump and heater while simplifying cleaning and maintenance. PolyScience Circulating Bath with MX Temperature Controller. It is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Click Here to View Product Video INCLUDED: The Polyscience MX28P100-A11B 28L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco Dry Ice Benchtop Freeze Dryer -75°C, -103°FFor thelaboratory with occasional lyophilization (more) requirements, the Dry Ice BenchtopFreeze Dryer Manifold provides a simple, economical means of freeze-drying. Since dryice cools alcohol or other heat transfer solutions to approximately -75 degreesC or -103 degrees F, the Dry Ice Benchtop Freeze Dry Manifold is ideal for processingmaterials with low eutectic points. The Dry Ice Benchtop Freeze Dry System isequipped with a center well for dry ice and solvent that serves as a watervapor collector and doubles as a convenient pre-freezing bath. Flasks, serumbottles and ampules may be frozen by dipping and rotating them in the well.Type 304 stainless steel with twelve valves and a single run capacity of 1liter. Valves accommodate either 1/2" or 3/4" flask adapters.Includes dry ice/solvent center well with 1.92 liter capacity and cover,1/2" outside diameter port for connection to vacuum pump and 3/8"outside diameter port or connection to vacuum gauge. INCLUDED: The Labconco Dry Ice Benchtop Freeze Dryer System: - Dry Ice/Solvent Center Well &amp; Cover (1.92 liter capacity) - 1/2" Outside Diameter Port for Connection to Vaccum Pump - 3/8" Outside Diameter Port for Connection to Vacuum Gauge - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty