Eppendorf 5415C centrifuge

This Jouan B4i Benchtop Centrifuge was removed from a university lab where it was surplus to require (more)ments. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. This item includes the following rotor: Thermo Jouan High Throughput Swing-Out Rotor Model S40Max Load 2.00kgMax speed 4300 (rpm) This item ran at 4000rpm with S40 Rotor fitted.As stated in the manual, the maximum speed for a swing-out rotor on this unit is 4000 rpm.

Sorvall Legend T Benchtop Centrifuge with 4600rpm Rotor This was removed from a university lab where (more) it was surplus to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition with marks from use. Included are; 1x Sorvall RotorP/N: 75006445S/N: 002518 4x Sorvall swinging bucket Heraeus AdaptorsP/N: 75006449

This Eppendorf 5810R Refrigerated Laboratory Centrifuge was removed from a university lab where it w (more)as surplus to requirements. The unit powers up and is in good cosmetic condition. It is in good working order. Tested with the A-4-62 rotor fitted, it ran smoothly up to, 4000rpm. The centrifuge was last serviced by an engineer on 11.07.23 All additional items included: 1 x Eppendorf A-4-62 Swing Bucket Rotor4 x MTP swinging plate buckets 4 x 250 ml rectangular plate buckets8 x tube holders 1.2-5ml 25 wells2 x 15ml bucket adapters 9 wells

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Neslab RTE-101 Refrigerated Water Bath Circulator was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It was first set to the minimum temp of -30C. It dropped to -16.8C after about 8 hours of running. It was then set to 37C and our thermometer read 36. It reached the boiling point with no problems. The unit is in reasonably good cosmetic condition but has some marks from use.

Memmert U30 drying and sterilisation oven. Capacity 45 L. Ambient temperature range +10 ºC to 220 ºC (more). Analogue temperature display (°C). Two power levels. Natural air circulation. Internal ventilation on 6 levels. Timer up to 120 min. Aluminium interior. Includes a perforated tray. Safety temperature limiter. Dimensions: internal 37*33*37 cm; external 52*55*68 cm. User manual not available. Introducing the Memmert U30 drying and sterilisation oven at Galileo Equipos! Perfect for laboratories looking for efficiency and precision, this oven stands out for its 45-litre capacity and a temperature range of up to 220 ºC. Ideal for drying and sterilisation, it offers optimal results thanks to its robust design and natural air circulation. With an integrated timer and temperature limiter, it ensures maximum safety in your processes. Take advantage of this excellent option with an unbeatable quality/price ratio. Buy now at Galileo Equipos and equip your laboratory with the best!

Memmert UN75 Natural Convection Oven 74L, 115V Temperature Range Ambient +5°C to 300°C Convection T (more)ype Natural Convection Chamber Volume 74L Features - 74 L (2.6 cu.ft.) chamber volume suitable for various sample sizes - Temperature range from +5°C above ambient to +300°C for flexible applications - 1 Pt100 sensor DIN class A in a 4-wire circuit for precise temperature monitoring - SingleDISPLAY digital PID-microprocessor controller with high-definition TFT-color display - Natural convection system ensures uniform heat distribution - Pre-heated fresh air admixture via electronically adjustable air flap - Sturdy, corrosion-resistant stainless steel interior with integrated heating on all sides - Powerful 115 V, 50/60 Hz, approx. 1800 W design for consistent performance The Memmert UN75 Natural Convection Oven 74L, 115V offers precise temperature control from +5°C above ambient to 300°C, ideal for various applications in laboratory settings. With a spacious 74 L (2.6 cu.ft.) chamber, this oven accommodates a range of sample sizes while maintaining consistent, uniform heating through its natural convection system. Its SingleDISPLAY digital PID-microprocessor controller provides easy monitoring with a high-definition TFT display, complemented by a Pt100 sensor DIN class A in a 4-wire circuit for precise temperature regulation. Designed for durability, the oven features a corrosion-resistant stainless steel interior with integrated heating on all sides and an electronically adjustable air flap for optimal air exchange, powered by a reliable 115 V, 50/60 Hz setup at approximately 1800 W. INCLUDED: The Memmert UN75 Natural Convection Oven 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Maximum Robustness The HRP high resolution scales are very robust. Their platforms are recognised to have an IP 67 level of protection. They feature additional sealing elements to protect against dust, dirt, and moisture and can thus be cleaned with a pressure washer. 9 advantages The ability to weigh loads up to 150 kg on a large pan with high readability and good repeatability, minimal eccentricity error over the entire range, fast and stable measurement (achievable within 1 second), stability of parameters over time and after transport, and a pan dimension adapted to the scale’s readability – all this is the result of using a measurement system based on improved RADWAG MonoBLOCK technology. The new – taller and larger – RADWAG MonoBLOCK has enabled the best repeatability and speed in the class of high-resolution industrial weighing platforms. Repeatability not repeatable by others Automatic adjustment with an internal weight not only guarantees the best quality of work and repeatability of results, but also saves time and provides comfort. For such industries as pharmaceutical, chemical, food and… HY10.HRP H scales are ideal for industrial conditions where high readability and repeatability of measurement are required, such as in the pharmaceutical, chemical and food industries. The HY10.HRP and HX7.HRP scales whose terminals are made of stainless steel can be used even in the most demanding wet environments. Choose a terminal HRP high-resolution scales can work with one of two industrial terminals: PUE 7.1 and PUE HY10. The PUE 7.1 terminal has: 5.7-inch color resistive display a touch-sensitive keyboard ABS plastic housing IP 43 protection rating communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, Wi-Fi®, optional additional modules: additional A/D converter module DP6. The PUE HY10 terminal features: 10.1-inch color graphic display touchscreen keyboard stainless steel housing IP 68/69 degree of protection communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, optional additional modules: Wi-Fi®, RS485, Profibus, Profinet, moduł wyjść analogowych, 12 IN/ 12 OUT. The power of steel The use of stainless steel for weighing pan construction guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the HRP high-resolution scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Use the potential Barcode scanners, receipt printers, label printers or additional displays – thanks to multipurpose software, HY10 scale can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations, differential weighing, labelling, peak hold and statistics. The power of HY10’s working mods.