Applied Biosystems ViiA 7 Real-Time PCR System & Software Lab

Accuris PR2121-N-25BLK qMAX Probe One-Step RT-qPCR Kit, No ROX, 2500 Reactions (1x25ml, 2x1.25ml) qM (more)AX Probe One Step Multiplex kits are specifically developed and optimized for efficient probe-based detection of multiple targets in a single reaction well. The Multiplex formulation is comprised of a 20x reverse transcriptase and 2x PCR Mix preparation ideally suited for complex RNA samples including low-copy number viral RNA commonly used in the clinical and research laboratory. INCLUDED: The Accuris PR2120-N-50BLK qMAX Green One-Step RT-qPCR Kit, No ROX, 5000 Reactions (1x50ml, 4x1.25ml) includes: - Accuris Probe One-Step RT-qPCR Kit, No ROX, 2500 reactions - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex TC1000-S Thermal CyclerThe Scilogex TC1000-S Thermal Cycler delivers high performance, high (more) throughput with easy programming via the color LCD touch screen display. Excellent temperature uniformity and high speed ramping rates with outstanding heat conductivity. Ideal for 96 x 0.2mL PCR tubes or 96-well plates. INCLUDED: The Scilogex TC1000-S Thermal Cycler includes: - 96 Well Block - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Block: Gold anodized 96 well block Maximum Heating Rate: 3.5°C/sec Maximum Cooling Rate: 2.5°C/sec A (more)vg Heating Rate: 3.0°C/sec Avg Cooling Rate: 2.0°C/sec Temperature Uniformity at 55°C: ± 0.2°C within 15 sec Temperature Uniformity at 70 °C: ± 0.3°C within 15 sec Temperature Uniformity at 95 °C: ± 0.6°C within 15 sec Block Temperature Range: 3°C to 99°C Gradient Temperature Range: 20 to 99°C Control Accuracy: ± 0.1°C Programming: Easy spreadsheet programming Memory: 350 typical programs in up to 30 user directories (password protected) Auto restart after power failure: Yes Heated Lid: High Performance Smart Lid (HPSL) Lid Temperature Range: 30 to 99°C Dimensions (WxDxH): 280 x 380 x 240 mm Weight: 13 kg

The Alpha Cycler 4 (AC-4) is the only true fully independently controllable four block thermal cycle (more)r available today. The system can be specified in any combination of 96 and 384 well formats across its four bays. Alpha Cycler software allows the user to quickly access their most commonly used protocols without the need to navigate through folders to find it, individual user logins; with protected protocols aswell-as allowing users’ access to temperature logs after each run to monitor the state of the system. • Compact – Small labspace footprint, condenses four truly independent blocks into one unit with no network/connectivity issues. • Active Sample cooling – For sharper amplification and minimal non-specific amplification. • Program Wizard – Generate a protocol specific to your sequence, template source and amplicon length in seconds . • Report generated on run conditions and state following completion of protocol. • USB connectivity and login/out function – Login and out to any system with it automatically configured to your defaults. • Android driven 10” tablet interface – HD screen with excellent response Block temperature range: 10°C to 100°C (4°C final hold) Temperature set point adjustment: 0.1°C Block uniformity (at 55°C): ±0.3°C Temperature accuracy (at 55°C): ±0.25°C Gradient availability: Between 10°C and 100°C Maximum gradient: 29°C Minimum gradient: 1°C Maximum heating rate: 3.4°C/s Minimum heating rate: 0.1°C/s Maximum cooling rate: 1.0°C/s Minimum cooling rate: 0.1°C/s Selectable heated lid temperature: 35°C to 115°C or off Lid uniformity: ±5°C Pre-heat lid: Yes Warm up time (from ambient): < 2 min Dimensions (HxWxD): 330 x 535 x 700 mm Weight: 47 kg

This CTC Analytics HTC PAL MXY 04-01A Autosampler System was removed from a university lab where it  (more)was surplus to requirements. The system powers up and is in good cosmetic condition. Any issues with the individual modules are listed below. Included in the system are; 1x CTC Leap Technologies AutosamplerModel MXY 04-01A 1x CTC Injection UnitModel No. MZ 01-00F 1x CTC Stack Cooler DWModel MC 04-01 Rev. GThe drawer doors have come away (plastic screws snapped) 1x CTC Power SupplyPart No. MN 01-00 1x CTC Pelter ThermostatPart No. MN 03-00 1x CTC TerminalModel No. 01-00A 1x CTC Injection Valve Drive unitModel No. MV 02-01A 1x CTC Arm PlatformModel No. MR 034-02B 1x Motor Assembly Syringe PalModel No. MM 01-01F 1x Active Reverse Rinse UnitSer No.&nbsp;SDS1208007 1x XP power supplyModel AED45US24 1x Syringe Holder:Model No. MSU 014-00A The unit is in good cosmetic condition. 1x Citation High Performance Sample LoaderThe PC powers on and is in good cosmetic condition. There is a Leap Technologies program on the Sample loader Other Control Programs:• Solvent Conditioner Control 2.16•One Minute NMR 2.18.43•Citation Control 2.4 1x Protasis Desgasser 1x Reloatable Power TapModel&nbsp;PDU20BHVIEC 10R 8x IEC ports Accessories: 2x PAL System X Type Syringes:Part No. 20452/01 • 100µl Hamilton Gas tight glass Syringes2x 5.0ml 1x 1000µl 1x 0.25µl The units are in good cosmetic condition. 1x L-Mark glass Syringe:F/N 0.72(G22s)b51•50µl The unit is in good cosmetic condition (with needle) 100ml Wheaton Glass bottles: 3x with lids2x without lids The units are in good cosmetic condition. 500ml Glass bottles1x Simax (with lid) 1x Boro 3.3 (without lid) The units are in good cosmetic condition.

Scientific Industries Bead Genie™, 120V The Scientific Industries Bead Genie™, 120V is a bead beater (more) ideal for lysing, extraction, or homogenization applications, utilizing an aggressive vertical mixing motion. This unit is supplied with holders to hold vertically 12 x microtubes (1.5 or 2.0ml), 6 x 15ml tubes, or 3 x 50ml tubes, and 12 x microtubes (1.5 or 2.0ml) horizontally. Beads are also available and sold separately for complete bead beating solution. The Bead Genie, built in the USA, is compact compared to most bead beaters and homogenizers, yet heavy and durable. INCLUDED: The Scientific Industries Bead Genie™, 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Temp. range 5 – 40°C LCD 5 digits Altitude up to 2000m Max relative humidity 80% Including replac (more)ement marker tips

Two-headed, chemically resistant, dry-running diaphragm pumps for a wide range of laboratory applica (more)tions. For transporting and evacuating without affecting the media. • 100% oil-free transfer so media cannot be contaminated during pumping, evacuating or compressing • Very suitable for vapors and condensates • Suitable for aggressive and corrosive gases and vapours • Maintenance-free, environmentally friendly • Flow rate: 20 L/min (at atmospheric pressure) • Working pressure: 1.0 bar • Final pressure (abs): 8 mbar • Max. pumping speed 1.2 m3/h

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: stainless steel wire Nominal value: 1 mg Material: stainless steel What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module&rsquo;s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).