Applied Biosystems 7500 Fast Real-Time PCR System

Perkin Elmer 9600 Gene Amp PCR système Model : N801-0002 Dimensions Width: 52 cm (20 in.) Depth: 61 (more) cm (24 in.) Height: 30.5 cm (12 in.) Weight: 40.5 kg (90 lb)

Block: Gold anodized 96 well block Max Heating Rate: 3.5°C/sec Max Cooling Rate: 2.5°C/sec Avg Heati (more)ng Rate: 3.0°C/sec Avg Cooling Rate: 2.0°C/sec Temperature Uniformity 55°C: ± 0.20°C within 15 sec Temperature Uniformity 70°C: ± 0.30°C within 15 sec Temperature Uniformity 95°C: ± 0.60°C within 15 sec Block Temperature Range: 3°C to 99°C Gradient Temperature Range 20 to 99 °C Control Accuracy +/- 0.1 °C Block Format: 96 well (70µl) Memory: 350 typical programs in up to 30 user directories (password protected) Auto restart after power failure: Yes Lid Temperature Range: 30 to 99°C Dimensions (WxDxH): 280 x 380 x 240 mm Weight: 13.0 kg

The GeneAmp PCR System 2700 is an automated instrument, specifically designed for the amplification  (more)of nucleic acids using the GeneAmp Polymerase Chain Reaction (PCR) process. The instrument has an integrated 96-well sample block, which houses an internal Peltier heating/cooling unit. The sample block is made of aluminum to provide optimal thermal transfer rate. Long term stability and high reliability. The sample block accommodates several different types of MicroAmp disposable tubes and plates, which must be used in order to create a sealed chamber. Temperature range: 4 °C to 99.9 °C Accuracy: ±0.25 °C from 35 °C to 100 °C Dimensions (H x W x D): 215 x 210 x 350 mm Weight: 5.9 kg

This Applied Biosystems ABI Prism 7700 Sequence Detection System  Model - 7700 was removed from (more) a university lab where it was surplus to requirements. The unit powers up but we were unable to test it further. It is in reasonable cosmetic condition but has marks from use. Pre-installation ManualPlanned Maintenance ProtocolSite Preparation & Safety Guide

This Agilent Stratagene Mx3005P Real-Time PCR System was removed from a university lab where it was  (more)surplus to requirements. The main unit is in reasonable used cosmetic condition but it does have some scrapes, scratches and marks from use. The unit powers up and both Green LED's light. You can also feel the well block heating up. The well block is 96 hole. The system includes:1 x Agilent Stratagene MX3005P. (various marks from use)1 x Dell E8400 PC with keyboard & mouse which we believe to be brand new.1 x iiyama monitor. (various marks from use) The PC has has a new HDD fitted and is running a fresh install of Windows 7. Also installed is a copy of Stratagene MxPro - Mx3005P v4.10 build 389. The software will control the Mx3005P unit. We have run a basic heat cycle with it and varified that the lamp will turn on & off. It has not been tested any further. The PC comes with a brand new sealed keyboard & mouse and a used iiyama monitor is also included. The system should include everything required to operate.

Eppendorf MasterCycler Nexus SX1 thermal cycler with fast silver block. Flexlid Concept capable of a (more)ccommodate all kind of PCR tubes and plates with a sample capacity of 96 × 0.2 mL PCR tubes, strips or 1 PCR plate (96 wells). Heating and cooling technology by Peltier elements. Temperature Range from 4 to 99 °C, with an accuracy of ± 0.2 °C and uniformity of ± 0.3 °C. Heating and cooling rate of max. 3°C/s. No gradient capacity. Heated lid 37 – 110 °C with Output USB, Ethernet, CAN in, CAN out. Dimensions (HWD): 320*410*250 mm; 11,2 kg. User manual. The Eppendorf MasterCycler Nexus SX1 thermal cycler provides scientists with flexibility with a silver block for increased speed that can accomodate several standard tube types from 0.2 mL tubes to 96 well plates, there is no need to buy additional blocks. It also provides robust thermal cycling in a compact footprint with intuitive graphic control.

ECO Silver Lauda - Cooling Thermostat LAUDA ECO with reliable technology and modern design for tempe (more)rature ranges from -50°C to 200°C depending of the models. Microprocessor management and integrated cooling system. Silver (monochromatic LCD graphic display), both equipped with mini USB interface. They are distinguished by their range of functions, ease of use and clarity of the display, allowing maximum comfort of use for the operator. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Refrigerated thermostats comes standard with tank lid, pump connections and are available with air and water cooling. A drain cock on the back of the device makes changing the liquid in the tank easy and safe.Thermostatic bath/circulator with latest microprocessor technology and integrated cooling system MAIN FEATURE • Monochrome grafic LCD display for simultaneous indication of actual and set value • User friendly menu navigation in plain language • Easy input via cursor and soft keys. Additional Tmax key for overtemperature protection • Fully electronic continuous controller with PID action • Safety class III for operation with flammable and non-flammable liquids. Overtemperature cut-out adjustable via menu • Vario pump with six adjustable performance levels • Easy control of the flow rate between internal and external circulation during operation without contact with the bath • USB interface as standard • Upgradeable with an interface module (analogue module, contact module, RS 232/485 module, Profibus, Ethernet-USB module) • Upgradeable with Pt 100/LiBus module for external control and remote control via Command console • Integrated programmer, 1 programme with max. 20 segments • Pump connectors with plastic nipples 13 mm as standard • Bath vessel made from stainless steel with drain valve • Condenser cooling Air • Utilizes natural refrigerants Graph of cooling performance of ECO Silver LAUDA cryostats. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Pump connection: Outflow and return with fittings 13 mm diameter (plastic) 2 - Bath cover 3 - Front grip recess 4 - Ventilation grill (both sides) 5 - Front panel (removable without tools) 6 - Four feet 1 - Rating label 2 - Control cable of cooling underpart (only with RE 1050 S) 3 - Rear grip recess 4 - Connecting lead between the control head and cooling underpart 5 - Bath draining tap 6 - Bath drain point 7 - Ventilation grill

Max capacity: 4x 400 mL Max density: 1.2 kg/dm³ Temperature: -6°C to 40°C Speed: 11000 rpm Force: 13 (more)800 RCF Kinetic energy: 35000 Nm Dimensions (WxDxH): 815 x 690 x 410 mm Weight: 88 kg Equipped with: 1x Hettich 4394 swing-out rotor (4000 rpm) 4x Hettich 5092 bucket 4x Hettich 5093 lid 2x Hettich 5123 insert (2x 50 mL falcon tube capacity) 2x Hettich 5121 insert (7x 15mL falcon tube capacity)

Gilson HPLC System & Accessories - 306 - 811B - 805 - 832 - 7955- 119 - 506C This was removed fr (more)om a university lab where it was surplus to requirements. This is a large system. Most of the units have been powered up but it has not been tested further. We anticipate it may take some level or refurbishment to get it back to full working order. Included are; 1x Gilson XL Sampling injector:Model 231 The unit powers on and is in good cosmetic condition 2x Gilson Piston Pumps:Model 306 The units both power on and are in good cosmetic condition. 1x 15 pin MALE to FEMALE Ribbon cable:The unit is in good cosmetic condition. 1x Gilson Manometric Module:Model 805 The unit is in good cosmetic condition.There was no power port on the unit, it must be powered by a controller cable connected via a 306 Pump. 1x Gilson Dynamic Mixer:Model 811B The unit powers on and is in good cosmetic condition. 1x Gilson Temperature Regulator:Model 832 • Version 1.01The unit powers on and is in good cosmetic condition. 1x Gilson Collum Chiller:Model 7955 The unit powers on and is in reasonable cosmetic condition. 1x Gilson UV/VIS Detector:Model 119 •Version 2.01 The unit powers on and is in good cosmetic condition. 1x Gilson 506C System Interface unit:The unit is in good cosmetic condition. No sign of power. 1x 25 pin MALE to FEMALE serial cable for the (Gilson 506C System Interface unit)The unit is in good cosmetic condition. 1x 25pin Male to 9pin FEMALE connector adaptor.The unit is in good cosmetic condition. 1x Gilson Dilutor:Model 401 The unit powers on and is in good cosmetic condition. 1x Decade Electrochemical Amperometric Detector: ANTEC LeydenVersion 3.02The unit powers on and is in good cosmetic condition. 1x Viglen Contender PC:Model C3000A *OSWindows 98 •SoftwareUniPoint LC Version 3.01 The unit powers on. Accessories: 1x Viglen MonitorModel TS700 The unit powers on and is in good cosmetic condition. 1x Viglen KeyboardModel KB-0325 •PS/2 connector The unit is in good working and cosmetic condition  1x Microsoft Mouse:FCC ID: c3kkmp1 •PS/2 connector 1x VGA Cable:The unit is in good working and cosmetic condition. CD:1x Gilson UNIPOINT for Windows 98Version 3.0 Floppy Disk:Gilson System Software: •Version 1.71 •Disks 1 - 4Ser no. 219H8B765The units are in good cosmetic condition. •Win32s Disks 1-2The units are in good cosmetic condition. 2x Gilson 10WSC heads (cases)Ref E50056 • 3x Gilson WSC Pistion Pump Head user guides are inside the cases. 1x Gilson Thermostatic Rack Unit:Ser no. 270J1G048 The unit powers on via the (Gilson 832 temperature regulator)the unit is in good cosmetic condition. Gilson Racks for the thermostatic unit. 1x Rack Well, 60x 2ml glass or plastic vials.Part no 30 1x Rack Well, 108 x 0.7ml glass or plastic vials.Part no 31 The units are in good cosmetic condition. 1x Gilson Serial Input/Output Channel: 5 sets of( 2x FEMALE to 1x MALE 9pin connectors) Manuals:1x Unipoint system software: (Folder)The manual is in good condition and appears to be complete. 1x Gilson 506C System Interface User Guide:The manual is in good condition and appears to be complete. 1x Gilson 401 Dilutor Instruction manual:The manual is in good condition and appears to be complete. 2x Gilson 231-401 Auto Sampling Injector Instruction manual:The manuals are in good condition and appear to be complete. 1x Gilson 119 uv/VIS Detector User Guide:The manual is in good condition and appears to be complete. 1x 802C. 803C, 804C Manometric Module Instruction manual:The manual is in good condition and appears to be complete. 2x Gilson 306 Piston Pump User Guide:The manuals are in good condition and appear to be complete. 3x Gilson WSC Pistion Pump Head User Guides:The manuals are in good condition and appear to be complete. 1x Gilson UNIPOINT for Windows 98 User Guide:The manual is in good condition and appears to be complete. 2x 1x Decade Electrochemical Amperometric Detector Manuals:The manuals are in good condition and appear to be complete. 1x Gilson 832 Temperature Regulator User Guide:The manual is in good condition and appears to be complete. 1x Gilson 811B Dynamic Mixer User Guide:The manual is in good condition and appears to be complete. 1x Gilson 805-806-807 Manometric Modules User Guide:The manual is in good condition and appears to be complete. 1x Gilson SC- type Piston pump head Instruction manual:The manual is in good condition and appears to be complete. 1x Gilson 506C System Interface User Guide:The manual is in good condition and appears to be complete. 1x Gilson 506 Contact/ Modem Operators Guide:The manual is in good condition and appears to be complete. Syringes: 2x Phenomenex HPLC Columns:Model SYNERGI 4U Hydro- RP 80A 1x •Size 250x4.60mm1x •Size 250x3.00mm The units are in good cosmetic condition. 1x Phenomenex HPLC Column:Model SYNERGI 4U Polar - RP 80A •Size 250x4.60mm The unit is in good cosmetic condition. 1x Phenomenex HPLC Columns:Model HyperClone 5u ODS (C18) 120A •Size 250x4.60mm The unit is in good cosmetic condition. 1x Phenomenex HPLC Columns:Model HyperClone 5u SILICA 120A •Size 250x4.60mm The unit is in good cosmetic condition. 1x Phenomenex HPLC Columns:Model Phenosphere - NEXT 5u C18 •Size 250x4.60mm The unit is in good cosmetic condition. 2x HYPERSIL (5u ODS) Syringes:Prod no. 30105-062 •Size 150x4.60mm The units are in good cosmetic condition. 1x HYPERSIL (5u HyPURITY) Syringe:Prod no. 21005-022 •Size 150x4.60mm The unit is in good cosmetic condition. 2x HYPERSIL (ELITE C18 5u) Syringes:Prod no. 30105-062 •Size 150x4.60mm The units are in good cosmetic condition. 2x Phenomenex SYNERGI 4u Hydro -RP 80A Syringes:Part no. 00G-4375-E0 •Size 250x4.60mm The units are in good cosmetic condition. 1x Phenomenex HYPERSIL 3u C18 (ODS) Syringe: •Size 100x2.00mm The unit is in good cosmetic condition. 1x Phenomenex HYPERSIL 4u MAX -R P 80A Syringe: •Size 150x4.60mm The unit is in good cosmetic condition. 1x Phenomenex LUNA 3u c18(2) 100A Syringe: •Size 100x2.00mm The unit is in good cosmetic condition. 2x HYPERSIL 3 C18 Syringes: •Size 100x4.60mm The units are in good cosmetic condition. 1x Phenomenex BIOSep- SEC-S 200 Syringe: •Size 300x7.80mm The unit is in good cosmetic condition. 1x Phenomenex JUPITER 5u C18 300A Syringe: •Size 150x4.60mm The unit is in good cosmetic condition. 1x Hamilton Microliter Syringe:Model no. 1802RSNE •25uL The unit is in good cosmetic condition. 1x Hamilton Microliter Syringe:Model no. 1801RSNE •10uL The unit is in good cosmetic condition. 1x Hamilton Microliter Syringe:Model no. 801RNE WAT •10uL The unit is in good cosmetic condition.

VACUUBRAND ME 4R NT Diaphragm Pump Ultimate Vacuum 100 mbar (75 torr) Maximum Pumping Speed 2.5 cfm (more) at 60Hz Number of Heads/Stages 2/1 Features - Contamination-free pumping, evacuation and compression - High flow rate even near ultimate vacuum - Adjustment of outlet pressure and vacuum level with regulator valves - Very low vibration - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs This one-stage diaphragm pump works as a vacuum generator and as well as a compressor. All parts in contact with pumped media are made of aluminum and selected plastics (PTFE diaphragms and valves). They enable a wide range of applications for non-corrosive gases. The inlet and outlet connections of the ME 4R NT are equipped with regulator valves for vacuum and overpressure, respectively. Both the compression pressure and vacuum level can be adjusted. Inlet vacuum level and outlet pressure are indicated by manometers. This one-stage diaphragm pump is an excellent choice for continuous, oil-free pumping and evacuation of non-corrosive gases and also for compression. Typical applications are vacuum ovens, pressure and vacuum filtrations and generation of compressed, absolutely oil-free air. Inlet- and outlet pressure can be adjusted continuously using the regulator valves. The manometers on inlet- and outlet side enable easy setting of the desired vacuum and pressure levels.INCLUDED: The VACUUBRAND ME 4R NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Character communication protocol is designed for communication between RADWAG balance and external d (more)evice via RS232, Ethernet or Wi-Fi* interfaces. The protocol consists of commands sent from the external device to the balance and responses sent from the balance to the device. Responses are sent from the balance each time a command is received as a response to the command. The commands that make up the communication protocol allow you to obtain information about the status of the balance and ways to influence its operation, for example, they allow you to receive weighing results from the balance, control the display, etc.

Benchmark H5100-HL Heated lid for MultiTherm Touch The Benchmark H5100-HL Heated Lid for the MultiTh (more)erm Touch offers precise temperature control from 0 to 105°C, ensuring optimal performance for a range of applications. Compatible with multiple block options, it accommodates plates and tubes up to 50ml, providing flexibility in sample processing. INCLUDED: The Benchmark H5100-HL Heated lid for MultiTherm Touch includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty