VWR Quattro Thermal Cycler

BD MAX System is intended for in vitro diagnostic (IVD) use in performing FDA cleared or approved nu (more)cleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR. The BD MAX System is capable of: Independent nucleic acid extraction and purification PCR amplification using thermal cycling across 24 lanes Real time detection of products of amplification Identification of each Sample Buffer tube by external barcode reader Work List verification by internal barcode reader Fluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysis Qualitative, quantitative and melt sample analysis Features: Integrated and fully-automated extraction and thermocycling steps Processes and analyzes up to 24 specimens per run On-board lysis and extraction with pre-filled reagent strips Real-time PCR with two 24-lane microfluidic PCR readers Dedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715 Consistent results through standardized workflow and protocols Rapidly expanding menu and open-system options to help address emerging testing needs Less than one minute of hands on time per sample CLIA Moderately complex and easy to use All-in-One computer contains instrument software that is responsible for instrument control, self-calibration, data analysis and storage User interface can be navigated with point-and-click icons (keyboard and mouse), or the Computer’s touchscreen Modules included: Temperature control/heating subsystem to control thermal cycling A liquid handling head to transfer samples from Sample Buffer tubes to Unitized Reagent Strips Onboard readers to measure the amplification reaction and report results Software/user interface allows for: 24 unique thermal cycling channels per system (two onboard readers) Entering patient/sample information, either manually or by external barcode reader Monitoring operations, communication and storing of data Qualitative, quantitative and melt sample analysis Error warnings Download of results to a USB thumb drive LIS connectivity Dimensions (HxWxD): 940 x 755 x 725 mm Weight: 113 kg

This listing is for 1 of 2 Roche LightCycler 2.0 Thermal Cycler

This Stratagene MX3000P Multiplex Quantitative RT- PCR System was removed from a university lab wher (more)e it was surplus to requirements. The main unit is in reasonably good, used cosmetic condition but it does have some scrapes, scratches and marks from use. The unit powers up and both Green LEDs light. You can also feel the well block heating up. The well block is 96 hole. The system includes: 1 x Agilent Stratagene MX3000P. (various marks from use)1 x Dell Optiplex755 PC with keyboard & mouse.1 x Monitor. (various marks from use)1 x VGA Cable.1 x RS232 Cable. The PC is running a fresh install of Windows 7. Installed is a copy of Stratagene MxPro - Mx3000P v4.10 build 389.The software will control the Mx3000P unit. We have run a basic heat cycle with it and verified that the lamp will turn on & off. It has not been tested any further.

Ohaus 30400128 0.2 mL PCR Plate/Tube Thermal Block The Ohaus 30400128 0.2 mL PCR Plate/Tube Thermal  (more)Block is crafted from Valox 357 Plastic for durability. This block is compatible with all Ohaus ISTH Series Thermal Shakers, and has a well depth of 0.5 in. INCLUDED: The Ohaus 30400128 0.2 mL PCR Plate/Tube Thermal Block includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus 30400171 Modular Heat Block, 96-well PCR Plate The Ohaus 30400171 Modular Heat Block, 96-well  (more)PCR Plate is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400171 Modular Heat Block, 96-well PCR Plate includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex TC1000-S Thermal CyclerThe Scilogex TC1000-S Thermal Cycler delivers high performance, high (more) throughput with easy programming via the color LCD touch screen display. Excellent temperature uniformity and high speed ramping rates with outstanding heat conductivity. Ideal for 96 x 0.2mL PCR tubes or 96-well plates. INCLUDED: The Scilogex TC1000-S Thermal Cycler includes: - 96 Well Block - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Manufacturer: Environics-IUT Model: ENVI-Air GC-IMS-Analyzer S/N: IM0911.120011 YoM: 2012 Descripti (more)on: The ENVI-Air from Environics is a continuously operating gas analyzer designed for ultra-low level detection of either single or multi-component hazardous gases in ambient air. It will operate indoor or outdoor in the harshest environmental conditions and needs little or no maintenance. The ENVI-Air can detect hazardous gases at far lower concentrations than traditional analyzers and react in real-time. This gives the operator a longer safe response window to take corrective action.It is based on GC-IMS technology. Ion Mobility Spectrometry (IMS) is a simplified atmospheric pressure time-of-flight technique that is highly selective with low ppb to % sensitivity. The GC-IMS adds multi-component separation prior to the IMS analysis. ENVI-Air does not require the use of paper tape, pre-concentrators or chemical reagents.The ENVI-Air is an industrial solution virtually drift free and unaffected by humidity or temperature changes and will be factory calibrated for the compounds of interest for maximum accuracy and reliability. Because of the simplicity of design and limited moving parts, ENVI-Air analyzers will have the lowest maintenance and downtime of any current analyzer system. Measurable Compounds: Ammonia, Acetone, Acrylonitrile, Acetonitrile, Arsine, Benzylchlorid, Bromine, Chlorine, Chlorocyane, BTX, CMME, Ethylene Oxide, Dibutylphthalat (DMP), Dimethylsulfat, HFPO, Hydrazin, Hydrogen Chloride, Hydrogen Bromide, Hydrogen Fluoride, Hydrogen sulfid, TDI, Methyl Bromide, Isopropyl alcohol, Methyl Iodide, Nitrogen dioxide, NMP, PFIB, Phosgene, Phosphine, PGME, PGMEA, Sulfur Dioxide, Triethylamine, Vinyl Chloride. Areas of application: - Oil and Gas Production- Plastics Manufacturing- Semiconductor Fabrication- Chemical Production- Pharmaceutical Manufacturing- Gas Pipeline Safety- Medical Sterilization- Primary Metal Processing Specifications: - Detection Principle: Gas Chromatography - Ion Mobility Spectrometry (IMS)- Ionization: Tritium (3H) No Licence or Wipe Tests Required- Sensitivity: Low ppb range- Moisture: 0% to 90% RH- Warm Up Time: 20 minutes- Measurement Time: Seconds- Power: 220 VAC/19VDC - Carrier Gas: No Carrier Gas Required- Operation Temperature: -10°C to +50°C- Storage Temperature: -40ºC to +50ºC - Enclosure: 19” Rack Mount- Power: 220 VAC/19VDC - Dimensions (L x W x H): 483 x 381 x 89 mm - Weight: 6.44 kg Items delivered: - Environics-IUT ENVI-Air GC-IMS-Analyzer- Instruction manual Condition: The item is in perfect coasmetic as well as operarting condition. It is 100% functional teasted and ready to be used.

This was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)when we tried to connect it to a PC with software we had some issues. (Software not included). We installed software on a test PC and it did seem to connect to the RG3000, but it is stating that there is a Fatal Hardware Malfunction. The machine can't be used until the distributor has service it. After starting it again we got another error: Thermistor is Open. We have removed the casing to check inside the unit and cannot find any obvious issues. There is an LCD panel inside that is showing 'TEMP OVER 140/127.5/2.1/152.0'. This displays as soon as the unit is switched on, so it looks like there is some sort of temperature error happening. There are 4 x PTC EPCOS C810 Thermistors in the power supply section of the unit. It's possible that there is a fault with at least one of those. It is in otherwise reasonable cosmetic condition with marks from use, but is sold for spares/repairs The item holds up to 72 x 0.1ml strip tubes.

F2 Mass Standard - knob weights. Nominal value - 5 kg.