Qiagen QIAgility PCR Prep System

This listing is for a Qiagen QIAgility PCR Prep System

This Stratagene MX3000P Multiplex Quantitative RT- PCR System was removed from a university lab wher (more)e it was surplus to requirements. The main unit is in reasonably good, used cosmetic condition but it does have some scrapes, scratches and marks from use. The unit powers up and both Green LEDs light. You can also feel the well block heating up. The well block is 96 hole. The system includes: 1 x Agilent Stratagene MX3000P. (various marks from use)1 x Dell Optiplex755 PC with keyboard & mouse.1 x Monitor. (various marks from use)1 x VGA Cable.1 x RS232 Cable. The PC is running a fresh install of Windows 7. Installed is a copy of Stratagene MxPro - Mx3000P v4.10 build 389.The software will control the Mx3000P unit. We have run a basic heat cycle with it and verified that the lamp will turn on & off. It has not been tested any further.

Thermocycler Eppendorf Mastercycler Ep Gradient s Realplex 2 Model Thermal Cycler 5345 + 6300 EPgra (more)dient S Weight : 20 kg Voltage : 220V Dimensions 60×30×50 cm Without Software

The TRobot PCR Thermal Cycler from Biometra is an automated PCR machine specifically designed for in (more)tegration in robotic environments. This robotic PCR machine uses a small amount of bench space and consists of two separate parts; the block module which can be placed in the robotic enclosure, and the controller which can be located outside of the PCR workstation for easy access. The block module features a motorized heated lid and a uniquely designed motorized plate lifter to elevate plates from the block for easy removal. In addition, the TRobot Manager Software can be directly linked to any origin robot software, allowing for quick, easy access to all thermocycler functions. Overall, the TRobot is an efficient PCR machine that delivers high sample throughput making it the perfect solution for integration in robotic systems. Block Capacity: 96 x .2ml tubes; 96 well microplates; strips of 8 tubes Block Material: Silver block with gold coating (96 well) Temperature Range: -3 to 99ºC Temperature Gradient: No Max. Heating Rate: 3.5ºC/sec Max. Cooling Rate: 2.5ºC/sec Temperature Uniformity: +/- 0.5ºC Control Accuracy: +/- 0.1ºC Lid Temperature Range: 30ºC to 99ºC Temperature Uniformity of Air Cushion: Highest homogeneity Lid Height Adjustment: Motorized lid and motorized plate lifter Program Memory: 250 average programs; unlimited on PC Auto restart after power failure: Yes Noise Emission: Very low Dimension (W x H x D): 17 x 23 x 20 cm (thermocycler) 19 x 44 x 125 cm (controller) Weight: 5.9 kg (thermocycler) 7.0 kg (controller)

Block format: 96 well Sample volume: 5 – 80 µl Lid temperature: 30 – 99°C Temperature gradient: 40°C (more) Max heating rate: 6.0°C/sec Avg haeting rate: 5.0°C/sec Max cooling rate: 4.5°C/sec Avg cooling rate: 3.5°C/sec Ramp adjustment: 0.1°C/sec Block temperature uniformity (15 sec after clock starts): ±0.15°C at 55°C, ±0.25°C at 72°C, ±0.50°C at 95°C Temperature range: 3°C to 99°C Control accuracy: ±0.10°C Temperature increments: 0.1°C/cycle Time increments: 1sec/cycle Sensistivity: 1 nmol/l FAM at 30 µl sample volume Measuring time: 96 well plate (single measurement, 6 colors) aprx 6 sec Measuring range: ±130.000 (±17 bit) Light source: Three long living high power LEDs (blue, white, red) Filter: Filterwheel with stepping motor, 6 positions for color modules Detector: Higly sensitive channel photo multiplier (CPM), Optimal signal/noise ration by effective noise reduction (decreased SNR (signal/noise ratio) technology) Heated lid: manual opening mechanism, automatic pressure application Contact pressure heated lid: 10 kg, automatic Dimensions (WxHxD): 280 x 380 x 430 mm Including software

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Thermo Scientific Multidrop 384 Microplate Dispenser Labsystems 832 Lab This was removed from a univ (more)ersity lab where it was surplus to requirements. The unit powers up with no faults, unable to test it further at our facility. It is in good cosmetic condition with minor marks.

Accuris W3300-5K - Compact Balance, 5000 grams, readability 0.1 grams, 115V Accuris Compact balances (more) have been designed to meet the basic needs of academic and research labs requiring weight determinations in increments of 0.01g to 0.1 g. Their reliable and precise weighing technology utilizes gold-plated, ceramic capacitors to determine sample mass.Accuris Compact balances have been designed to meet the basic needs of academic and research labs requiring weight determinations in increments of 0.01g to 0.1 g. Their reliable and precise weighing technology utilizes gold-plated, ceramic capacitors to determine sample mass.The Compact line includes 6 models covering a wide range of maximum weight capacities. The lower capacity units (120g, 300g, and 500g) are readable to 0.01 g and come with a draft shield ring to prevent air currents from affecting measurements. These models feature a 4.5-inch diameter, stainless steel weigh pan. The larger capacity models (1000g, 5000g, and 10,000g) do not include the draft shield ring, come with larger weighing pans of 6.3 to 7-inch diameter, and are readable to 0.1g.All balances in the Accuris Compact line offer large, brightly lit LCD panels, and are easy to operate using the intuitive and splash-resistant control panel. Different modes allow weight to be displayed in various units: grams, ounces, carats, and simple programs can be used for piece counting and percent deviation weighing.Leveling feet are located toward the front of the balance for easy access, and a leveling bubble in the control panel is easy to see for quick and simple leveling on the lab bench. The balances can be calibrated using a calibration weight and a few keystrokes on the control panel – just select a calibration point in the calibration mode, place the calibration weight onto the weighing pan, and press the “CAL” button.Lightweight, and small in size, Accuris Compact balances will provide years of trouble-free service.INCLUDED: The Accuris W3300-5K - Compact Balance, 5000 grams, readability 0.1 grams, 115V includes: - Weighing Pan - Power Cord - One Year Manufacturer's Warranty

Labconco FreeZone 6L -50C Console Freeze Dryer with Stoppering Tray Dryer and PTFE coil and collecto (more)r, Purge ValveFeatures - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers with Stoppering TrayDryers are designed for lyophilizing moderate to large loads and stopperingvials or serum bottles under vacuum. The console features a front viewingwindow and interior space for a vacuum pump (sold separately). The console'supright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. The Stoppering Tray Dryer featuresthree 16.5" x 12" processing shelves. A single 1 hp HCFC/CFC-freerefrigeration system and 1000-watt electric heater cool and heat the fluidmedium circulating through channels in the shelves. Lyo-Works™ OS provides areal time display of freeze dryer and tray dryer parameters on a 5" fullcolor, capacitive touch screen. Models with PTFE-coated collectors that canwithstand corrosive compounds are available.Features Upright stainless steel collector coil holds 6L of ice before defrosting Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. The console provides interior space for vacuum pump (sold separately) Lyo-Works OS provides real time display of collector temperature and vacuum level One-touch data logging and display provides information to maximize sample quality and minimize run time Customizable settings include language, time zone, temperature and vacuum FreeZone™ exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run. FreeZone™ Stoppering Tray Dryer provides precise control and program flexibility for consistent performance. INCLUDED: The Labconco 700622100 FreeZone 6L -50C Console Freeze Dryer with Stoppering Tray Dryer and PTFE coil and collector, Purge Valve 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Polyscience MX-CA11B MX Immersion Circulator (Maximum Temperature: 135C), 120V, 60Hz3D Visualization (more) of the Polyscience Immersion CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block iframe{height:315px !important;} The Polyscience MX-CA11B MX Immersion Circulator (Maximum Temperature: 135C), 120V, 60Hz is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Features Large, universal icon and English display On-screen prompts Single-point calibration capability For laboratory use only Suitable for tank capacities up to 28 liters Click Here to View Product Video INCLUDED: The Polyscience MX-CA11B MX Immersion Circulator (Maximum Temperature: 135C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Block: Gold anodized 96 well block Max Heating Rate: 3.5°C/sec Max Cooling Rate: 2.5°C/sec Avg Heati (more)ng Rate: 3.0°C/sec Avg Cooling Rate: 2.0°C/sec Temperature Uniformity 55°C: ± 0.20°C within 15 sec Temperature Uniformity 70°C: ± 0.30°C within 15 sec Temperature Uniformity 95°C: ± 0.60°C within 15 sec Block Temperature Range: 3°C to 99°C Gradient Temperature Range 20 to 99 °C Control Accuracy +/- 0.1 °C Block Format: 96 well (70µl) Memory: 350 typical programs in up to 30 user directories (password protected) Auto restart after power failure: Yes Lid Temperature Range: 30 to 99°C Dimensions (WxDxH): 280 x 380 x 240 mm Weight: 13.0 kg