Ohaus 30400170 Modular Heat Block, 64 x 0.2 mL PCR Tubes

Lab-Bubble Still Air PCR Enclosure - Black  BUB-PCR-SA-BLK This was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

This Applied Biosystems 7900HT Fast Real Time PCR System was removed from a university lab where it  (more)was surplus to requirements. The system is in good used cosmetic condition. The lab confirmed it was in working order prior to removal. We have been able to connect the unit to the PC, but are unable to test it further. It consists of the following parts: 1 x Applied Biosystems 7900HTPart no. 4330966SN - 279002990 1 x SICK CLV422-1910S02 Fixed barcode scanner 1 x AB 7067/4 Microplate stacker. 1 x Symbol Barcode Scanner. 1 x Dell Optiplex 960 PC with Dell Monitor, keyboard and mouse. The has the following software installed:-Applied Biosystems 7900HT Version 2.4 Sequence Detection Systems (SDS)Applied Biosystems RQ Manager Version 1.2.1 We have all the passwords, which are available on request once the system has been sold.

Benchmark TC 9639 Thermal Cycler w/ Multi-Format Block Benchmark’s TC9639 Thermal Cycler provides co (more)nsistent, reliable results for laboratories with medium to high throughput. From its large, touch-screen user interface to its unique, multi-format block, this cycler is loaded with features. The program wizard and 10 preinstalled programs make it easier than ever to get up and running. A large, full color touch screen serves as the operations center where all functions are accessed. From the “Home” screen, simply touch an icon to view the last run program, enter the program library, or use the program wizard to quickly enter a protocol. In addition, icons for favorite programs can be added for faster access. The program wizard guides users through quickly setting up a protocol in a single screen. Once entered, programs are shown graphically, and can be edited by simply touching the step that requires modification. Time and temperature increments can be built into programs as well as slower ramp rates. Storage capabilities are unlimited; programs can be stored in public folders, private (password protected) folders or on a flash drive. The full virtual keyboard allows for alphanumeric naming of programs and folders. The fully adjustable heated lid prevents condensation and evaporation of samples. Lid temperature can be programmed, and when the block temperature is below 35C, the lid automatically shuts off. Heating and cooling of the block are precisely and accurately controlled within exceptionally tight tolerances by a proprietary algorithm that simulates sample temperature. With the multi-format block, there is no need for the expense of multiple interchangeable blocks. The TC 9639 has the flexibility to accept 96 x 0.2ml tubes, a 96 well plate or 39 x 0.5ml tubes all in the same sample block. An in-situ adapter is available for use with slides. Additionally, the unit may be purchased with a 384 well sample block. INCLUDED: The Benchmark TC 9639 Thermal Cycler w/ Multi-Format Block includes: - Multi-Format Block - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark C2248 StripSpin 12D Digital Mini Centrifuge w/ PCR Strip Rotor The new StripSpin 12D digit (more)al mini centrifuge from Benchmark is uniquely designed for centrifugation of 12 position PCR strips. It features digital speed control up to 5,500 rpm, timer control up to 99 min., and a safety interlock to stop the centrifuge if the lid is opened during operation.With built in rcf conversion, speed can be set/displayed in rpm or rcf, the StripSpin 12D is the perfect solution for centrifugation of up to 4 x 12-position high efficiency PCR strips (or 48 x 0.2ml tubes) and includes a 2 year warranty.INCLUDED: The Benchmark C2248 StripSpin 12D Digital Mini Centrifuge w/ PCR Strip Rotor includes: - Power Cord - PCR Strip Rotor - Two Year Manufacturer's Warranty

Accuris PR2121-N-25BLK qMAX Probe One-Step RT-qPCR Kit, No ROX, 2500 Reactions (1x25ml, 2x1.25ml) qM (more)AX Probe One Step Multiplex kits are specifically developed and optimized for efficient probe-based detection of multiple targets in a single reaction well. The Multiplex formulation is comprised of a 20x reverse transcriptase and 2x PCR Mix preparation ideally suited for complex RNA samples including low-copy number viral RNA commonly used in the clinical and research laboratory. INCLUDED: The Accuris PR2120-N-50BLK qMAX Green One-Step RT-qPCR Kit, No ROX, 5000 Reactions (1x50ml, 4x1.25ml) includes: - Accuris Probe One-Step RT-qPCR Kit, No ROX, 2500 reactions - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris PR2120-N-500 qMAX Green One-Step RT-qPCR Kit, No Rox, 500 Reactions The qMAX Green One-Step  (more)RT-qPCR Kit is aready-to-use 2x master mix and companionthermostable reverse transcriptase for usein highly sensitive real-time RT-PCR assaysin which intercalating dye-based detectionprovides the option of a post amplificationmelt profile. The mix is powered by HSTaq DNA Polymerase, qMAX MMLV derivedReverse Transcriptase, and an optimized bufferchemistry for robust first-strand cDNA synthesisand real-time PCR in a single tube. The mixdelivers earlier quantification cycle values(Ct) and broad range detection for increasedsensitivity, speed, reliability and reproducibility.The qMAX Green One-Step RT-qPCR Kit canbe used to quantify a specific target RNA fromeither total RNA or mRNA while reducing thenumber of pipetting steps and time to result. All Accuris One-Step Kits are compatible with standard and fast cycling protocols and provide increased sensitivity, speed and reproducibility for a broad range of samples and targets. The polymerase mix is available with different levels of ROX reference dye for compatibility with all qPCR instruments. INCLUDED: The Accuris PR2120-N-50BLK qMAX Green One-Step RT-qPCR Kit, No ROX, 5000 Reactions (1x50ml, 4x1.25ml) includes: - Accuris PR2120-N-500 qMAX Green One-Step RT-qPCR Kit - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This listing is for 1 of 2 Fisherbrand F2 Vortex Mixer

The single quad VERITY 1920 Mass Spectrometer is ideal for laboratories seeking effective MS detecti (more)on to isolate pure compounds. The versatile VERITY 1920 MS can utilize electrospray ionization (ESI) or atmospheric pressure chemical ionization (APCI) ion sources, providing application flexibility. The detector can be combined with various Gilson Purification systems and selectively purifies active ingredients from small to large molecules and natural products from lab-to pilot-scale. Gas Supply: 4.1–6.9 bar, > 98% pure Nitrogen, < 8 L/min – Practical 5 L/min Mass Resolution: ± 1 m/z Sensitivity: 100:1 (ESI+ at 10 pg reserpine) Scan Rate: 10,000 m/z sec-1 Scan Modes: Positive and/or negative ESI, Positive and/or negative APCI Mass Range: 10–2000 m/z Detector Single: Quadrupole Mass Accuracy: ± 0.1 m/z Dynamic Range: 4.5 orders of magnitude Dimensions (LxWxH): 560 x 280 x 660 mm Weight: 32 kg

The scales is designed for weighing patients in health care facilities and in clinics. It is equippe (more)d with indicator PUE C315 series comprising a backlit LCD display and 5-button keyboard ensuring simple operation of scale basic functions. Personal scales is supplied either by mains or by batteries. The model without height-meter has an indicator attached to the weighing platform. It is manufactured as a dual range instrument.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content &ndash; of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y Moisture Analyzer is 160&deg;C. How Do I Finish the Drying? In 4 Ways The MA 5Y Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer&rsquo;s accuracy and sensitivity. 10-Inch Display Bigger screen &ndash; 10&rsquo;&rsquo; &ndash; means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light &ndash; an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note &ndash; Note Down Your Conclusions It&rsquo;s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Labconco 120, 150 &amp; 300 ml Fast-Freeze Flask TopFlexible,non-contaminating silicone rubber top f (more)its on Fast-Freeze 120, 150 and 300 mlbottoms.Fast-FreezeFlasks attach with adapters to valve ports on Labconco Drying Chambers andManifolds. A complete Fast-Freeze Flask consists a rubber top, glass bottom anda supply of filter paper. Tops, bottoms and filter paper are availableseparately as replacement components. Adapters are available in borosilicateglass or stainless steel. Fast-Freeze Flasks and Adapters are compatible withany brand freeze dryer that has 1/2" or 3/4" diameter valve ports.Glass flaskswithstand max temperature of 490º C. Flask toppers withstand a maxtemperature of 450º C. INCLUDED: The Labconco 7544200 120, 150 &amp; 300 ml Fast-Freeze Flask Top includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Julabo MAGIO MS-600F Refrigerated Circulator, 115V/60Hz Working Temperature Range -35°C to 200°C Co (more)oling Capacity 600W at 20°C Refrigerant R449A Features - TFT Color Touchscreen - Multilingual - Input for setpoints, warning/safety values and menu functions - ICC (Intelligent Cascade Control), self-optimizing temperature control - ATC3 3-Point-Calibration - Pt100 External sensor connection for measurement and control - Continuously variable pressure/suction pump - Early warning system for low liquid level (DBGM 203 06 059.8) - Adjustable high temperature cut-out, visible via display - RS232/RS485, USB and Ethernet interface for online communication - Integrated programmer - Built-in drain tap The MAGIO™ refrigerated/heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Refrigeration combinations offer low temperature capabilities from -30°C to -50°C with an upper temperature limit of 200°C. The MAGIO™ MS circulator incorporates easy operation via a large color TFT touchscreen. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. A multilingual interface, integrated programmer, Pt100 port for external temperature control, RS232/RS485, USB and Ethernet connections for external PC control and data-logging. Modbus TCP/IP incorporated. Stakei port for external accessory control (solenoid valve, etc.). PID temperature control provides ± 0.01°C stability. Infinitely variable centrifugal pressure/suction pump capacity of 16-31 L/min with pressure to 3.4-13.3 psi. Stainless steel bath tanks with integrated drain port. 115V version with 1 kW heating power; 230V version with 2 kW heating power. Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo MAGIO MS-600F Refrigerated Circulator, 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty