Ohaus 30130874 4 x 8-Place PCR Strip Fixed Angle Rotor

BioTrove OpenArray NT Cycler qPCR Instrument Model - 20001-200 & Software This was removed from (more) a university lab where it was surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks. Included are; BioTrove OpenArray NT Cycler:Model - 20001-200SN - 0498 Accessories: 1x BioTrove OpenArray Case Sealing Station:Model - 20253SN - CS0571The unit powers on and is in good cosmetic condition. Software CDs 1x Open Array Real-time qPCR Analysis Software CD:item no. 4435938Version 1.0.4 1x Open Array Instrument Configuration CD: Part no. 20395 1x Open Array SNP Genotyping Analysis Software CD:Part no. 20919 Version 1.0.5

Eppendorf Realplex 4 MasterCycler Epgradient S Real Time Cycler 96-Well This item was removed from a (more) university where it was surplus to requirement. It is in good cosmetic condition and powers on, however it does not include the required controller. We made several attempts to connect it to the software from another unit (not included), but it would not communicate Therefore, it is listed as Spares/Repair. Includes an Eppendorf USB drive with pre-installed software and a digital user manual.

Accuris PR2121-N-25BLK qMAX Probe One-Step RT-qPCR Kit, No ROX, 2500 Reactions (1x25ml, 2x1.25ml) qM (more)AX Probe One Step Multiplex kits are specifically developed and optimized for efficient probe-based detection of multiple targets in a single reaction well. The Multiplex formulation is comprised of a 20x reverse transcriptase and 2x PCR Mix preparation ideally suited for complex RNA samples including low-copy number viral RNA commonly used in the clinical and research laboratory. INCLUDED: The Accuris PR2120-N-50BLK qMAX Green One-Step RT-qPCR Kit, No ROX, 5000 Reactions (1x50ml, 4x1.25ml) includes: - Accuris Probe One-Step RT-qPCR Kit, No ROX, 2500 reactions - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark MultiCycler 248, MultiBlock Thermal Cycler, 2 x 48 x 0.2ml, 115-230V Display 10” full co (more)lor touch screen with adjustable angle Block Temperature Range 4°C - 99.9°C Temperature Accuracy ≤ ± 0.2°C (at 90°C) Features - Dual block format - All accept 0.2 mL PCR tubes and strips, flat or dome caps - Each block functions independently - Block temperature range: 4°C - 99.9°C; Lid temperature range: 30 - 112°C - Intuitive Touch Screen Control - Large 10-inch adjustable touch screen - folds away when not in use - Program wizard for fast and easy programming - Advanced program features - Gradient capabilities - up to 8 temperatures per block Designed for laboratories wanting flexibility in their applications, Benchmark’s MultiCycler™ Thermal Cyclers offer multiple, independent cycling blocks in a single unit. Dual or triple block models are available, both offering extremely fast cycling profiles, large touch screen interfaces, self-adjusting heated lids, gradient capabilities, and an easy-to-use program wizard. All programming features are accessed from the large, 10” full color touch screen. The screen can be angled towards the user when in use and then tucked away to save space. A program wizard guides users through the simple protocol set up process. Advanced programming features include gradient, adjustable ramp rates, and time increments and decrements. For multi-user labs, password protection prevents interference of an existing run. A USB provides for unlimited program storage and easy transfer of protocols between MultiCycler machines. The auto-adjusting heated lid prevents condensation and evaporation of samples. Lid temperature can be programmed, and when the block temperature is below 35°C, the lid automatically shuts off. Peltier units allow for exceptionally fast heating and cooling of the blocks. Temperature change is precisely and accurately controlled within tight tolerances by a proprietary algorithm that simulates sample temperature, resulting in fast runs and reproducible results. The wells are arranged in a 4×8 and 6×8 format, allowing for the use of PCR strip tubes in both models. Each block is independently controlled. INCLUDED: The Benchmark MultiCycler 248, MultiBlock Thermal Cycler, 2 x 48 x 0.2ml, 115-230V includes: - Power Cord - Two Year Manufacturer's Warranty

Pfeiffer Vacuum Diaphragm Pump MVP 015-2 This was removed from a university lab where it was surplus (more) to requirements. The unit powers up and runs but has not been tested further. It is in good cosmetic condition with minor marks.

Pfeiffer TCP040 Power Supply This item was removed from a university where it was surplus to require (more)ment. It is in good cosmetic condition, it is untested as we are unable to test it further at our facility. Run Time: 10797.0

Teknomek Stainless Steel Lectern with Double Undershelf This was removed from a university lab where (more) it was surplus to requirements. It is brand new and unused. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this. - Width: 600mm - Depth: 400mm - Height: 1000mm - Floor clearance: 175mm

Eppendorf Research Plus 3 Pipette Kit, 0.5 to 1000uL Adjustable or Fixed Volume Adjustable Volume Ra (more)nge 0.5 to 1000uL Pipette Type Air Displacement Features - Mechanical air-cushion pipette with standard 3-button operation (one operating element for volume selection, one for pipetting, and one for tip ejection) - Ideal for accurate, easy, and ergonomic manual pipetting of aqueous solutions - Feel the difference in weight and pipetting forces: Designed according to the Eppendorf PhysioCare Concept® principles - Benefit from one of the lowest operating and tip ejection forces on the pipette market, helping to reduce hand and arm strain - Enjoy minimal tip attachment forces due to a spring-loaded tip cone (available for all pipettes up to 1 mL) - Temporarily adjust your pipette in seconds for better accuracy when pipetting challenging liquids like ethanol or when pipetting at high altitudes. Return to factory adjustment without calibration - Autoclave the entire pipette or only the lower part according to your needs and applications to ensure a proper decontamination - Premium material ensures a high UV and chemical resistance; special single-channel lower parts for aggressive chemicals available - ACT®-labeled single-channel pipettes and epT.I.P.S.® pipette tips help you make an informed choice when it comes to sustainability The Eppendorf Research Plus 3 Pipette Kit offers an ergonomic and lightweight solution for precise manual pipetting. This kit features a mechanical air-cushion design with a standard 3-button operation, facilitating volume selection, pipetting, and tip ejection. It is engineered to minimize strain with one of the lowest operating and tip ejection forces available, thanks to its compliance with the Eppendorf PhysioCare Concept®. The spring-loaded tip cone ensures minimal attachment forces for pipettes up to 1 mL, enhancing user comfort. Adjust the pipette quickly for specific needs like pipetting challenging liquids or working at different altitudes, with an easy return to factory settings without recalibration. Each component, from the pipette to the lower part, can be autoclaved for thorough decontamination. Made with premium materials, these pipettes offer high UV and chemical resistance, and they are available with single-channel lower parts designed for aggressive chemicals. The ACT® label on single-channel pipettes and epT.I.P.S.® pipette tips highlights their eco-friendly attributes. These durable, intuitive pipettes feature 4-digit displays and color coding for easy selection, providing a dependable and sustainable option for daily laboratory tasks. INCLUDED: The Eppendorf Research Plus 3 Pipette Kit, 0.5 to 1000ul includes: - 3 Single-Channel Pipettes (0.5 - 10 uL, 10 - 100 uL, and 100 - 1000 uL) - 3 x epT.I.P.S Pipette Tips Boxes (x 96 tips, 20 uL M, 200 uL, 1000 uL) - Operator's Manual - Manufacturer's Documentation - 6 Month Full Parts and Labor Warranty Eppendorf Research Plus 3 Pipette Kit, 0.5 to 1000uL SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeAir DisplacementPipette Volumes0.5 to 10 uL (adjustable in 0.01 uL increments)10 to 100 uL (adjustable in 0.1 uL increments)100 to 1000 uL (adjutable in 1 uL increments)Maximum Systematic Error0.5 to 10 uL: ± 8% (± 0.1 uL)10 to 100 uL: ± 3% (± 0.5 uL)100 to 1000 uL: ± 3% (± 6 uL)Maximum Random Error0.5 to 10 uL: ± 5% (± 0.04 uL)10 to 100 uL: ± 1% (± 0.15 uL)100 to 1000 uL: ± 0.6% (± 2 uL)Pipette SeriesResearch PlusDownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote .features-side img{height:500px;}

Turbulent Flow Chromatography Manufacturer: Cohesive Technologies Model: TurboFlow HTLC Cyclone P 0, (more)5 x 50 mm S/N: 618029 P/N: 952707 Item delivered:- 1 x TurboFlow HTLC Cyclone P 0.5 x 50 mm Conditionen:The column is in new condition.

MORE DETAILS TO FOLLOW