Labnet Multigene Mini Thermal Thermo Cycler PCR 3x8 Stripe Block 24 x 0.2 ml

Thermocycler Eppendorf Mastercycler Ep Gradient s Realplex 2 Model Thermal Cycler 5345 + 6300 EPgra (more)dient S Weight : 20 kg Voltage : 220V Dimensions 60×30×50 cm Without Software

Block: Gold anodized 96 well block Max Heating Rate: 3.5°C/sec Max Cooling Rate: 2.5°C/sec Avg Heati (more)ng Rate: 3.0°C/sec Avg Cooling Rate: 2.0°C/sec Temperature Uniformity 55°C: ± 0.20°C within 15 sec Temperature Uniformity 70°C: ± 0.30°C within 15 sec Temperature Uniformity 95°C: ± 0.60°C within 15 sec Block Temperature Range: 3°C to 99°C Gradient Temperature Range 20 to 99 °C Control Accuracy +/- 0.1 °C Block Format: 96 well (70µl) Memory: 350 typical programs in up to 30 user directories (password protected) Auto restart after power failure: Yes Lid Temperature Range: 30 to 99°C Dimensions (WxDxH): 280 x 380 x 240 mm Weight: 13.0 kg

This Corbett CG-1 Palm Cycler PCR Machine was removed from a university lab where it was surplus to  (more)requirements. The unit powers up and is in very good cosmetic condition. We had the unit inspected by a service engineer. They have checked the system and recovered the Palm Cycler software. They ran the system through steps of range temperatures and time slots. The system runs as required within the time frame of each temperature. They inserted an external temperature probe while running the experiment. The measured temperature was close to what was set. It is in full working order. Block Spec:96 well block 96x 0.2ml tubes (read from manual)Dia 4.4mm x Depth9.6mm

Applied Biosciences 7900 HT Fast Real-Time PCR Complete System This was removed from a university l (more)ab where it was surplus to requirements. We were able to get the unit to communicate with the PC but we were unable to get it to run cycles due to a serial number conflict. We were able to open the door but not close it again. Included with it are; 1 x DELL PCWindows Vista Business 1 x SDS 2.3Item is in a good used condition. The Item powered on and working, but not connecting to PCR Tester 1 x Bti PRGF Desktop CentrifugeIt is in good used condition. The item powered on and was tested, all working 4 x PGRF CF10142 LOT 2894 1 x Diagnostica Stago PrinterItem powered on and tested, all working 1 x Datalogic QS6000 Plus Barcode ReaderThe item powered on and was tested, all working Associated books and a spare Block Assembly.

This Applied Biosystems 7900HT Fast Real-Time PCR System was removed from a university lab where it  (more)was surplus to requirements. The unit powers up but has not been tested further. It is in reasonably good cosmetic condition but has some marks from use.

Bio-Rad C1000 Touch Thermal Cycler + CFX96 Real-Time System This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in good working order. It is in excellent cosmetic condition with minor marks from use. Included with it are; C1000 Touch Thermal Cycler Quick GuideC1000 Touch Thermal Cycler Instruction ManualCFX96 AND CFX384 Real-Time PCR Detection Systems Instruction manual

The Frontier™ 5000 Multi Series centrifuges are multifunctional, compact, low speed centrifuges and  (more)ideal for general laboratory applications. The included rotor standard options can process both round and conical bottom tubes (including common blood tubes) and can be easily retrofitted with accessories to process smaller tubes. Included in the FC5706-K model you will have the angular rotor with a maximum capacity of 12 x 15 ml. Features: Maximum relative centrifugal force (x g) at 4.427 g; maximum speed 6,000 rpm; tube diameter without adapter 18 mm / 15 ml; outer/inner radius 110 mm; angle 32°. HOW DOES A LABORATORY CENTRIFUGE WORK? A careful explanation with the Ohaus FC5706 model. Video presentation of the Frontier 5000 Multi centrifuges. You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. COMFORT Designed for comfortable use, Frontier™ Multi centrifuges feature convenient control on an intuitive interface, allowing for responsive operation even when wearing gloves. VERSATILE Frontier™ Multi centrifuges can accommodate standard 50 and 15 mL tubes, including common blood tubes. When used with accessories, the rotors can be adapted for sizes up to 1.5ml. SAVE SPACE Frontier™ Multi centrifuges save valuable bench space by integrating all of their functionality into a small footprint. TECHNICAL FEATURES Speed ​​range: 200 rpm – 6.000 rpm. Maximum relative centrifugal force: 4.427 g. Program memories: 99. Acceleration gear: 10. Deceleration gear: 10. Lid lock: by motor. Noise level: ≤60 ± 2 dB (A). Rotor Compatibility: Angled 12 x 15ml; Angled 6 x 50ml; Oscillating rotor 6 x 5 ml. Rotor recognition method: manual. Execution time: quick rotation; 10 seconds to 99 hours 59 minutes 59 seconds; Continuous. Safety certification: CE; FCC.

Ortoalresa UNICEN 21 centrifuge with RT 173 swinging bucket rotor. Maximum speed 4,200 rpm and F.C.R (more): 2860xg. Includes RE341 reducers for 4 Falcon-type tubes of 50 mL with and without skirt and RE339 reducers for 4 Falcon-type tubes of 15 mL. Timer from 1 to 99 min or continuous. 3-phase braking control. Unbalance safety. Autoclavable rotors. Forced ventilation. Rolled steel housing, ABS plastic front. AISI 304 stainless steel chamber. Programmable automatic opening with viewer. Lock. LED display. Microprocessor control. Includes manual. Increase the precision of your laboratory with the Ortoalresa Unicen 21 Centrifuge and its swing-out rotor RT 173, available at Galileo Equipment. This equipment is ideal for the separation of liquid mixtures, ideal for applications in molecular biology, analytical chemistry and pharmacology. The swing-out rotor RT 173 provides an effective and uniform separation, guaranteeing consistent results in each use. Its robust design and advanced technology ensure durability and ease of use. Improve the efficiency and safety of your processes with this high-performance centrifuge. Take advantage of our exclusive offers and optimize your laboratory today!

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Labconco 120, 150 & 300 ml Fast-Freeze Flask TopFlexible,non-contaminating silicone rubber top f (more)its on Fast-Freeze 120, 150 and 300 mlbottoms.Fast-FreezeFlasks attach with adapters to valve ports on Labconco Drying Chambers andManifolds. A complete Fast-Freeze Flask consists a rubber top, glass bottom anda supply of filter paper. Tops, bottoms and filter paper are availableseparately as replacement components. Adapters are available in borosilicateglass or stainless steel. Fast-Freeze Flasks and Adapters are compatible withany brand freeze dryer that has 1/2" or 3/4" diameter valve ports.Glass flaskswithstand max temperature of 490º C. Flask toppers withstand a maxtemperature of 450º C. INCLUDED: The Labconco 7544200 120, 150 & 300 ml Fast-Freeze Flask Top includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty