IKA DB 1.1 PCR Tube Dry Block (0.5 ml)

This listing is for a Qiagen Qiagility PCR Prep System.The unit is in full working condition and is  (more)ready for immediate release.The Qiagen QIAgility Automated PCR Prep System provides users with a fully automated PCR setup, responsive software, and increased productivity. This compact, bench-top liquid handling robot eliminates the need for manual pipetting steps, with high precision and reproducibility. The Qiagen QIAgility uses Qiagen PCR kits and step-by-step guided software to automatically calculate all mixes and worktable set up so you won’t need to program pipetting steps. This PCR prep system uses a single-channel pipetting head with dynamic liquid level sensing and supports almost any kind of thermal cycler and lab ware.HEPA filter: Preinstalled dual-cartridge 3M Air-Mate HEPA (High-Efficiency Particulate Air) filter system provides positive pressure clean air within the closed hood.Liquid-level sensing: Minimum detection volume (10 µl in 200 µl PCR tubes). Only functional in combination with QIAGEN Conductive Filtered Tips.Pipetting head: Single-channelPrecision: CV <1%, 5–200 µl (dry-well transfer) CV <5%, 2–5 µl (wet-well transfer) CV <10%, 1 µlTable capacity:6 x SBS positions (127.76 x 85.48 mm) for adaptors and Tip Rack Holders 1 x Master Mix Block 1 x Reagent BlockTip disposal:All used tips ejected externally — no waste accumulation on the worktableTip volume:1–200 µlUV lamp Preinstalled UV lamp for worktable decontaminationDeck Dimensions 19.5×14”Dimensions 21x25x18″Electrical 100–240 V AC, 250 VA, 50–60 HzWeight 90.2 lbEnvironmental Tolerances Operating temperature, 15–30 °C (59–86°F), Operating humidity: 40–70%

Applied Biosystems Veriti 96 Well Thermal Cycler Lab Spares/Repairs This item was removed from a uni (more)versity where it was surplus to requirement. It is in good cosmetic condition but does not power on, therefore, it is listed as Spares/Repair.

Quanta Biotech QTAS TAS16 Temperature Acquisition System Thermal Cycler Analysis This item was remov (more)ed from a university where it was surplus to requirement. It is in good cosmetic condition, we are unable to conduct further testing at our facility. Included is the following: - QTAS Manual Disc - QTAS Software Disc

Accuris PR2120-L-1000 qMAX Green One-Step RT-qPCR Kit, Low Rox, 1000 Reactions The qMAX Green One-St (more)ep RT-qPCR Kit is aready-to-use 2x master mix and companionthermostable reverse transcriptase for usein highly sensitive real-time RT-PCR assaysin which intercalating dye-based detectionprovides the option of a post amplificationmelt profile. The mix is powered by HSTaq DNA Polymerase, qMAX MMLV derivedReverse Transcriptase, and an optimized bufferchemistry for robust first-strand cDNA synthesisand real-time PCR in a single tube. The mixdelivers earlier quantification cycle values(Ct) and broad range detection for increasedsensitivity, speed, reliability and reproducibility.The qMAX Green One-Step RT-qPCR Kit canbe used to quantify a specific target RNA fromeither total RNA or mRNA while reducing thenumber of pipetting steps and time to result. All Accuris One-Step Kits are compatible with standard and fast cycling protocols and provide increased sensitivity, speed and reproducibility for a broad range of samples and targets. The polymerase mix is available with different levels of ROX reference dye for compatibility with all qPCR instruments. INCLUDED: The Accuris PR2120-L-1000 qMAX Green One-Step RT-qPCR Kit, Low Rox, 1000 Reactions includes: - 10x1ml reaction mix, 10x100µl RTase - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

QIAGEN’s real-time PCR cycler, the Rotor-Gene Q, combines multiple optimized design features to prov (more)ide the outstanding performance and reliable results that your research demands. Together with optimized QIAGEN kits for real-time PCR, the Rotor-Gene Q enables streamlined analysis for a wide range of applications. Q-Rex Software is the new operating and analysis software for life science qPCR applications, with a plug-in concept that lets you add new functionality without affecting established workflows. A range of QIAGEN kits for the Rotor-Gene Q enables reliable quantification in all your real-time PCR applications without the need for optimization of reaction and cycling conditions. Kits for real-time PCR and HRM applications are available for: Gene expression analysis Pathogen detection DNA methylation analysis Genotyping and gene scanning miRNA research Channel: Blue Excitation: 365 ± 20 nm Detection: 460 ± 20 nm Examples of fluorophores detected: Marina Blue, Edans, Bothell Blue, Alexa Fluor 350, AMCA-X Channel: Green Excitation: 470 ± 10 nm Detection: 510 ± 5 nm Examples of fluorophores detected: FAM, SYBR Green I, Fluorescein, EvaGreen, Alexa Fluor 488 Channel: Yellow Excitation: 530 ± 5 nm Detection: 557 ± 5 nm Examples of fluorophores detected: JOE, VIC, HEX, TET, MAX, CAL Fluor Gold 540, Yakima Yellow Channel: Orange Excitation: 585 ± 5 nm Detection: 610 ± 5 nm Examples of fluorophores detected: ROX, CAL Fluor Red 610, Cy 3.5, Texas Red, Alexa Fluor 568 Channel: Red Excitation: 625 ± 5 nm Detection: 660 ± 10 nm Examples of fluorophores detected: Cy5, Quasar 670, LightCycler Red640, Alexa Fluor 633 Channel: Crimson Excitation: 680 ± 5 nm Detection: 712 high pass nm Examples of fluorophores detected: Quasar 705, LightCycler Red705, Alexa Fluor 680 Channel: HRM Excitation: 460 ± 20 nm Detection: 510 ± 5 nm Examples of fluorophores detected: SYBR Green I, SYTO9, LC Green, LC Green Plus+, EvaGreen Operating software is available. Analysis software must be purchased.

Eppendorf MasterCycler Nexus SX1 thermal cycler with fast silver block. Flexlid Concept capable of a (more)ccommodate all kind of PCR tubes and plates with a sample capacity of 96 × 0.2 mL PCR tubes, strips or 1 PCR plate (96 wells). Heating and cooling technology by Peltier elements. Temperature Range from 4 to 99 °C, with an accuracy of ± 0.2 °C and uniformity of ± 0.3 °C. Heating and cooling rate of max. 3°C/s. No gradient capacity. Heated lid 37 – 110 °C with Output USB, Ethernet, CAN in, CAN out. Dimensions (HWD): 320*410*250 mm; 11,2 kg. User manual. The Eppendorf MasterCycler Nexus SX1 thermal cycler provides scientists with flexibility with a silver block for increased speed that can accomodate several standard tube types from 0.2 mL tubes to 96 well plates, there is no need to buy additional blocks. It also provides robust thermal cycling in a compact footprint with intuitive graphic control.

This was removed from a university lab where it was surplus to requirements. The unit powers up and  (more)holds mains water pressure but has an issue with evaporation temperature being high, and/or and issue with auger rotation. It likely requires an NTC sensor. It is sold for spares/repairs

This item has just arrived in our stock. Please enquire for further details.

Motic Panthera TEC POL EPI (Binocular) Features - UC Plan Achromat objectives (strain-free) for FOV  (more)22mm - Transmitted and transmitted/ incident stand options - Transmitted light: LED/HAL light source interchangeable - Integrated focusable/ centerable Bertrand lens - Motic LightTracer: Coded nosepiece &amp; Digital light intensity knob The Panthera TEC POL EPI series fills a last gap in the Panthera family: Polarization microscopes for all material sciences, ready to handle transparent samples like fibers and foils with their inherent birefringence. The Incident light models for opaque materials work out the specific reflectivity (bireflection) of flat surfaces. To extend the application fields, all microscopes carry an intermediate tube with Bertrand lens to analyze the crystal structure and interference figures of gems, precious stones and minerals.INCLUDED: The Motic Panthera TEC POL EPI (Binocular) includes: - 4X/0.1 (WD 30.5mm) Objective - 10X/0.25 (WD 17.4mm) Objective - 40X/0.65/S (WD 0.6mm) Objective - 60X/0.8/S (WD 0.35mm) Objective - Widefield UC-WF10X/22mm with Diopter Adjustment - Dust Cover - Power Cord - Allen Key - Blue Filter - Halogen Bulb - Adjustable Key for Nosepiece - Interference Color Chart - Screws for Metal Extension Support - Operator's Guide Motic Panthera TEC POL EPI (Binocular) SpecificationsOptical systemColour Corrected Infinity Optical System (CCIS®)Observation tubeBinocular head, Siedentopf typeSensor type-Sensor size-Capture resolution-Live display mode (through Wi-Fi)-Live display mode (through ethernet)-Live display mode (through HDMI)-Inclination25º inclinedTrinocular light split-Interpupillary distance48-75mmDiopter adjustmentOn both eyepieces, +/- 4 diopterEyepiecesWidefield UC-WF10X/22mm with diopter adjustmentNosepieceReversed quintuple, coded with single centering holesIntermediate BodyEpi-illuminator LED with rotatable analyzer 360º, Bertrand lens, fixed polarizer and slot for compensatorsObjective classificationPlan Achromatic objectives &amp; CCIS® UC Plan Achromatic (strain-free), DINObjectives4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)Objective mounting threadW 4/5"x1/36" (RMS standard)StageCircular rotating 360º, lockableStage sizeØ160mmCondenserFocusable and centerable Achromat Swing-out Abbe condenser N.A. 0.90/0.13 (strain-free) and rotatable polarizerDiaphragmIris diaphragmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentFine focus precision2µmFocusing stroke25mmUpper limit stopUpper limit stop preset but adjustableFilter holderOn top of the illuminator with fixing capTransmitted illuminationKoehler Quartz halogen 6V/30W with intensity controlIllumination interchangeabilityHalogen/LED and LED color temperature interchangeabilityIllumination featuresMotic LightTracer: Light memory, sleep mode (auto on-off), nosepiece LED light intensity and mode indicatorTransformerInternalPower supply110-240V (CE)Other featuresUSB 2.0 for external camera powerDimensions LxWxH410x300x395mmNet weight10.4kgComparison of ModelsSpecificationPanthera TEC POL EPI (Binocular)Panthera TEC POL EPI (Digital)Panthera TEC POL EPI (Trinocular)Optical systemCCISCCISCCISObservation tubeBinocular head, Siedentopf typeBinocular head, Siedentopf type with built-in digital cameraTrinocular head, Siedentopf typeInterpupillary distance48-75mm48-75mm48-75mmEyepiecesWidefield UC-WF10X/22mm with diopter adjustmentWidefield UC-WF10X/22mm with diopter adjustmentWidefield UC-WF10X/22mm with diopter adjustmentIntermediate BodyEpi-illuminator LED with rotatable analyzer 360º, Bertrand lens, fixed polarizer and slot for compensatorsEpi-illuminator LED with rotatable analyzer 360º, Bertrand lens, fixed polarizer and slot for compensatorsEpi-illuminator LED with rotatable analyzer 360º, Bertrand lens, fixed polarizer and slot for compensatorsObjectives4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)StageCircular rotating 360º, lockableCircular rotating 360º, lockableCircular rotating 360º, lockableStage sizeØ160mmØ160mmØ160mmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentCoaxial coarse and fine focusing system with tension adjustmentCoaxial coarse and fine focusing system with tension adjustmentTransmitted illuminationKoehler Quartz halogen 6V/30W with intensity controlKoehler Quartz halogen 6V/30W with intensity controlKoehler Quartz halogen 6V/30W with intensity control.comparison-table tr td:nth-child(2) { background-color: #fffacd; }DownloadsTechnical Specification Download

Bio-Rad GelAir Drying System The GelAir drying system is perfect for drying polyacrylamide and agaro (more)se gels. Dried between two sheets of cellophane, the gels come out completely clear with a glossy finish, ideal for densitometry, photodocumentation, autoradiography, overheads, and long-term storage. The heated drying chamber works like a convection oven to dry mini gels in 45 minutes or 20×20 cm gels in 60 minutes, rivaling the speed of conventional gel dryers that require a vacuum pump. Drying times may vary depending on percentage and thickness of the gel. The dryer holds up to four drying frames at once. For drying polyacrylamide and agarose gels. Timer control : 0–3 hr, fully adjustable  Function modes : Fan only; fan and heat; off  Dryer capacity : 4 shelves, each accommodating 1 drying frame  Dimensions (WxDxH) : 27x43x30 cm  Weight : 8 kg     GelAir Drying Frames     Inner dimensions : 20×20 cm  Drying frame  Molded polycarbonate bottom frame, stainless-steel top frame  Clamps  Molded polysulfone, 8 clamps per drying frame  Gel capacity : 4 mini (8×7 cm) gels, 2 Criterion™ (13.3×8.7 cm) gels, 1 large (20×20 cm) gel (per frame) This system includes Dryer Frames Clamps Assembly table Cellophane supports

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7&rdquo; graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator&rsquo;s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Thanks to their highly efficient ULPA filters, AIRTECH SMARTFLOWAirtech BSC-1304 II A2 Class II-A2 b (more)iological safety cabinets are designed to protect both samples, the operator and the laboratory environment when working with potentially infectious agents. Its high qualities backed by a series of air quality certifications, filters, structure, electrical components and diversity of sizes provide the operator with the greatest comfort and safety when working. It can be used in hospitals, research centers and life science companies in general. AIRTECH SMARTFLOW Class II-A2 biosafety cabinet. Working size 130x79x200 cm (LxFxW). Centrifugal turbine with adjustable speed. Flow rate upward 0.53 ± 0.025 m / s, downward 0.33 ± 0.025 m / s. 30/70 air recirculation (exhaust / recirculation). ULPA extraction and discharge filters (according to IEST-RP-CC001.3), with an efficiency of 99.999% for a particle size between 0.1 and 0.3 microns. Front window with double laminated glass. Stainless steel interior. Programmable germicidal UV and LED white light. Two interior plugs. LCD display with indicators of air flow, temperature and humidity of the work area, filter pressure, hours of UV light, hours of filter use. Eco operating mode. Incorrect air flow, filter replacement and front window height alarms. Support structure included. CE certified. Manufactured according to EN 12469; ISO 14644.1 (air quality); ISO29463 (filtration) and EN-61010-1 (electrical safety).