GeneAmp PCR system

Applied Biosystems Veriti 96 Well Thermal Cycler Lab Spares/Repairs This item was removed from a uni (more)versity where it was surplus to requirement. It is in good cosmetic condition but does not power on, therefore, it is listed as Spares/Repair.

This was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)when we tried to connect it to a PC with software we had some issues. (Software not included). We installed software on a test PC and it did seem to connect to the RG3000, but it is stating that there is a Fatal Hardware Malfunction. The machine can't be used until the distributor has service it. After starting it again we got another error: Thermistor is Open. We have removed the casing to check inside the unit and cannot find any obvious issues. There is an LCD panel inside that is showing 'TEMP OVER 140/127.5/2.1/152.0'. This displays as soon as the unit is switched on, so it looks like there is some sort of temperature error happening. There are 4 x PTC EPCOS C810 Thermistors in the power supply section of the unit. It's possible that there is a fault with at least one of those. It is in otherwise reasonable cosmetic condition with marks from use, but is sold for spares/repairs The item holds up to 72 x 0.1ml strip tubes.

Ohaus 30400171 Modular Heat Block, 96-well PCR Plate The Ohaus 30400171 Modular Heat Block, 96-well  (more)PCR Plate is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400171 Modular Heat Block, 96-well PCR Plate includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris PR2121-H-500 qMAX Probe One-Step RT-qPCR Kit, High Rox, 500 Reactions The qMAX Probe One-Ste (more)p RT-qPCR Kit is aready-to-use 2x master mix and companionthermostable reverse transcriptase for usein highly sensitive real-time RT-PCR assaysand has been formulated for probe-detectiontechnology, including TaqMan®, Scorpions® andmolecular beacon probes. The mix is powered byHS Taq DNA Polymerase, qMAX MMLV derivedReverse Transcriptase, and an optimized bufferchemistry for robust first-strand cDNA synthesisand real-time PCR in a single tube. The mixdelivers earlier quantification cycle values(Ct) and broad range detection for increasedsensitivity, speed, reliability and reproducibility.The qMAX Probe One-Step RT-qPCR Kit canbe used to quantify a specific target RNA fromeither total RNA or mRNA while reducing thenumber of pipetting steps and time to result. INCLUDED: The Accuris PR2121-H-500 qMAX Probe One-Step RT-qPCR Kit, High Rox, 500 Reactions includes: - Accuris PR2121-H-500 qMAX Probe One-Step RT-qPCR Kit - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris PR2120-H-1000 qMAX Green One-Step RT-qPCR Kit, High Rox, 1000 Reactions The qMAX Green One-S (more)tep RT-qPCR Kit is aready-to-use 2x master mix and companionthermostable reverse transcriptase for usein highly sensitive real-time RT-PCR assaysin which intercalating dye-based detectionprovides the option of a post amplificationmelt profile. The mix is powered by HSTaq DNA Polymerase, qMAX MMLV derivedReverse Transcriptase, and an optimized bufferchemistry for robust first-strand cDNA synthesisand real-time PCR in a single tube. The mixdelivers earlier quantification cycle values(Ct) and broad range detection for increasedsensitivity, speed, reliability and reproducibility.The qMAX Green One-Step RT-qPCR Kit canbe used to quantify a specific target RNA fromeither total RNA or mRNA while reducing thenumber of pipetting steps and time to result. All Accuris One-Step Kits are compatible with standard and fast cycling protocols and provide increased sensitivity, speed and reproducibility for a broad range of samples and targets. The polymerase mix is available with different levels of ROX reference dye for compatibility with all qPCR instruments. INCLUDED: The Accuris PR2120-N-50BLK qMAX Green One-Step RT-qPCR Kit, No ROX, 5000 Reactions (1x50ml, 4x1.25ml) includes: - Includes 10x1ml reaction mix, 10x100µl RTase - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This listing is for a Analytical 200g Weight. The unit is in full working condition and is ready fo (more)r immidate realese. Analytical Weight Set is a set of weights used in laboratory balances and scales for precise measurements

IKA ROTATEMP me-vi Viscometer Package Viscosity Measuring Range 40,000,000 mPas Speed Range 0.01 to  (more)200 rpm Time Setting Range 0.017 to 6000 min Features - The combination of ROTAVISC viscometer and ROTATEMP high-temperature system simplifies the viscosity measurement of difficult-to-measure, highly viscous samples. - The complete system is supplied ready for connection. With its space-saving design, it fits easily into any laboratory. - ROTAVISC and ROTATEMP are compatible with the labworldsoft ® laboratory software, which makes it easy to automate, control and document your measurement results. - Samples can reach 300°C in 16 minutes without overheating. The ROTATEMP me-vi Package is the ideal solution for precise and reliable viscosity measurement of difficult-to-measure, highly viscous samples. The package combines the ROTAVISC me-vi rotational viscometer with the ROTATEMP high-temperature system to ensure optimum temperature control during the measurement process. ROTAVISC me-vi is a high-performance rotational viscometer for applications in a measuring range from 100 to 40,000,000 mPas. The space-saving ROTATEMP high-temperature system is the perfect complement for measuring temperature-dependent samples that are not able to flow at room temperature, such as asphalt, bitumen, wax, polymers, candy base or hot melt adhesives. Thanks to precise and efficient temperature control, based on the proven IKA magnetic stirrer technology, samples can be heated up to 300 °C in just 16 minutes without overheating. This allows precise and reproducible measurements to be carried out. INCLUDED: The IKA ROTATEMP me-vi Viscometer Package includes: - ROTAVISC me-vi control S000 - ROTASTAND - ROTATEMP - SP set-2 - PT 100.8 - Power Cord - Operator's Guide - Two Year Manufacturer's Warranty

Bransonic accessories are designed to maximize theeffectiveness of your Bransonic baths. It is impor (more)tant that parts do not reston the bottom of the bath, as it can inhibit the ultrasonic activity andpossibly damage the unit. A variety of perforated trays, mesh baskets, beakers,and support racks give you the option of direct or indirect cleaning. All fivemodels come with covers to allow the cleaning bath to heat up more quickly. Direct Cleaning Method - Suspends parts using a perforated tray, mesh basket, or a support rack. - Permits sound waves to penetrate directly to the parts. Indirect Cleaning Method - Suspends parts using a solid tray, or beakers with a beaker cover. - Ideal for cleaning small parts. - Discarded soil cleans easily from a beaker or solid tray. - Indirect method is ideal for sample preparation. Perforated trays, solid insert trays, and wire mesh basketshave built-in handles specially designed to prevent accessories from touchingthe tank bottom. Support racks allow total volume of the tank to be used whilekeeping parts, fixtures, or containers about 1/2" above the tank bottom. Supportracks also are useful as countertop drain racks, holding parts above thecountertop surface. For 3800 Series Ultrasonic Cleaner 1.5 Gallon.