fully refurbished ABI 7500

The Applied Biosystems QuantStudio 3 Real-Time PCR System is designed for users who need an affordab (more)le, easy-to-use real-time PCR system that doesn’t compromise performance and quality. The simplified Design and Analysis software is ideal for both first-time and experienced users. Using proven OptiFlex technology (featuring four coupled channels and white LED) and featuring three independent Veriflex temperature zones, the QuantStudio 3 system enables improved data accuracy and sensitivity for a broad range of genomic applications. Sample capacity: 96 wells Reaction volume: 0.1 mL block, 10–30 μL Excitation source: Bright white LED Optical detection: 4 coupled filters Excitation/detection range: 450–600 nm/500–640 nm Multiplexing: Up to 4 targets Maximum block ramp rate: 0.1 mL block, 9.0°C/sec Average sample ramp rate: 3.66°C/sec Temperature uniformity: 0.4°C Temperature accuracy: 0.25°C Compatible dyes: FAM/SYBR Green, VIC/JOE/HEX/TET, ABY/NED/TAMRA/Cy 3, JUN, ROX/Texas Red Security, auditing, and e-signature (SAE) features: No

2 universal blocks with 48 wells each and standard lids for 48 x 0.2 ml tubes or 24 x 0.5 ml tubes w (more)ith flat caps per block Temperature range: +4 to 105°C Block accuracy: ± 0.1°C Block homogeneity: ±0.2°C at 72°C Heating and cooling rate: Max 5°C/s Programs: Unlimited programs via network PC or USB memory sticks: Internal memory for 500,000 standard PCR protocols

QIAGEN’s real-time PCR cycler, the Rotor-Gene Q, combines multiple optimized design features to prov (more)ide the outstanding performance and reliable results that your research demands. Together with optimized QIAGEN kits for real-time PCR, the Rotor-Gene Q enables streamlined analysis for a wide range of applications. Q-Rex Software is the new operating and analysis software for life science qPCR applications, with a plug-in concept that lets you add new functionality without affecting established workflows. A range of QIAGEN kits for the Rotor-Gene Q enables reliable quantification in all your real-time PCR applications without the need for optimization of reaction and cycling conditions. Kits for real-time PCR and HRM applications are available for: Gene expression analysis Pathogen detection DNA methylation analysis Genotyping and gene scanning miRNA research Channel: Blue Excitation: 365 ± 20 nm Detection: 460 ± 20 nm Examples of fluorophores detected: Marina Blue, Edans, Bothell Blue, Alexa Fluor 350, AMCA-X Channel: Green Excitation: 470 ± 10 nm Detection: 510 ± 5 nm Examples of fluorophores detected: FAM, SYBR Green I, Fluorescein, EvaGreen, Alexa Fluor 488 Channel: Yellow Excitation: 530 ± 5 nm Detection: 557 ± 5 nm Examples of fluorophores detected: JOE, VIC, HEX, TET, MAX, CAL Fluor Gold 540, Yakima Yellow Channel: Orange Excitation: 585 ± 5 nm Detection: 610 ± 5 nm Examples of fluorophores detected: ROX, CAL Fluor Red 610, Cy 3.5, Texas Red, Alexa Fluor 568 Channel: Red Excitation: 625 ± 5 nm Detection: 660 ± 10 nm Examples of fluorophores detected: Cy5, Quasar 670, LightCycler Red640, Alexa Fluor 633 Channel: Crimson Excitation: 680 ± 5 nm Detection: 712 high pass nm Examples of fluorophores detected: Quasar 705, LightCycler Red705, Alexa Fluor 680 Channel: HRM Excitation: 460 ± 20 nm Detection: 510 ± 5 nm Examples of fluorophores detected: SYBR Green I, SYTO9, LC Green, LC Green Plus+, EvaGreen Including laptop

BOD Sensor is an extremely reliable innovative solution for the determination of BOD, without the us (more)e of mercury. Easy to use, fast and simple. It screws directly onto the bottle containing the sample and a pressure transducer microprocessor transfers the BOD value directly to the display (in mg / l) and automatically stored in the BOD sensor (5 measurements at 24 hour intervals, offering the possibility of making the analysis even during the weekend). The BOD value can also be obtained directly from the display at any time, even after five days. Measurement is available on 4 different scales - 90ppm, 250, 600 and 999 BOD. For higher values, the measurement can be measured by diluting the sample. The BOD Sensor System 6 is a complete package for analyzing 6 samples simultaneously, consisting of a 6-position stirring base, BOD sensors, dark glass bottles, carbon dioxide absorption caps and magnetic stir bars. The BOD Sensor System 10 is a complete package for analyzing 10 samples simultaneously, consisting of a 10-position stirring base, BOD sensors, dark glass bottles, carbon dioxide absorption undercaps and magnetic stir bars. The stirring base has been designed to meet the user's needs, it is comfortable, guarantees a high quality stirring and the small footprint allows to accommodate up to 5 bases of 6 positions (30 samples) or 3 of 10 positions ( 30 samples) in a VELP incubator (FOC 200E). Determine the BOD value in 5 steps! To better analyze the BOD values ​​with the innovative VELP Scientifica systems, based on the respirometric technique, capable of providing highly reliable results, just 5 easy and simple steps are enough: 1. Add the magnetic stir bar to the dark glass bottle, add the sample and place the CO2 trap filled with the necessary reagents 2. Incubate everything 3. Screw in the sensor 4. Monitor the activity of microorganisms 5. Read the BOD value (ppm or mg / l), based on the change in pressure inside the bottle due to the activity of microorganisms Technical features: Sensor display: 3-digit LED display Bod measurement: mg/l (ppm) directly on the display BOD scales: 90, 250, 600, 999, 4000 ppm, Higher values after dilution Bottle volumes:  500 ml Data storage: BOD values at 24h intervals Sensor construction material: Technopolymer Power: BOD Sensor System 6 2 W; BOD Sensor System 10 2 W Sensor battery type: CR 2430 Power supply: BOD Sensor System 6 Sensors: 2x3V lithium batteries Stirring Station: 230V / 50-60Hz or 115V / 60Hz BOD Sensor System 10 Sensors: 2x3V lithium batteries Stirring Station: 230V / 50-60Hz or 115V / 60Hz

LABORATORY OVEN SLN SMART POL-EKO SLN - NATURAL AIR CONVECTION The SLN series laboratory ovens are d (more)esigned to reach high temperatures, up to 300 °C. Available from 15 to 245 liters with latest generation control, quality materials and top-class performances. Large touchscreen, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading and you will be amazed. ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO ovens are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The SLN SMART series ovens are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Powder coated sheet metal structure (graphite front panel) - Stainless steel interior - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +105°C) SLN SMART SERIES The seven models of the SLN series cover most of your needs: from mini stoves to the 245 liter internal volume model. For larger volumes, look at the SLW series stoves. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

Speed: 200 – 2400 rpm Dimensions (WxHxD): 120 x 150 x 120 mm