Bio-Rad C1000 Touch Thermal Cycler + CFX96 Real Time System Lab

Real Time PCR Cycler Corbett Rotor Gene 3000. Fully equipped for real-time amplification, endpoint a (more)nalysis, autocall genotyping, and nucleic acid concentration measurement. Rotor for  72 0.1 ml strip tubes. Excitation source 470nm, 530nm, 585nm, 625nm high power LEDs. 510nm, 555nm, 610nm and 660nm, 580nm, 610nm high pass and bandpass detection filters. Detected fluorophores Sybr-Green I, Fam, Tet, Joe, Vic, Max, Rox, Tamra, Cy3, Cy5, Cy5.5, Tex Red. Temperature range 25 - 99 ° C. Heating / cooling range 2.5 ° C / sec (tube temperature); uniformity +/- 0.01 ° C. Includes PC and software. User manual. Real Time PCR Cycler Corbett Rotor Gene 3000. The Rotor-Gene multi-filter system can detect all available real-time chemistries including Sybr-Green, dual-labelled and MGB probes, FRET and Molecular Beacons.Most DNA amplification enzymes/ buffers can be used on the system to generate Quantitation/Melt data. It is not necessary to use expensive kits that are specific to the instrument. Additionally, Rotor-Gene offers the most user-friendly real-time analysis software system currently available. Using an experiment Wizard, a new real-time protocol can be setup within a matter of minutes in a few easy to follow steps.

Benchmark H5100-02 96 Well PCR plate or 96 x 0.2ml Block for MultiTherm Touch The Benchmark H5100-02 (more) 96 Well PCR plate or 96 x 0.2ml Block for MultiTherm Touch is designed for use with the Benchmark H5100-HCT MultiTherm Touch Heating and Cooling Shaker. The H5100-02 is compatible with the H5100-HL Heated Lid. INCLUDED: The Benchmark H5100-02 96 Well PCR plate or 96 x 0.2ml Block for MultiTherm Touch includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus 30400170 Modular Heat Block, 64 x 0.2 mL PCR Tubes The Ohaus 30400170 Modular Heat Block, 64 x (more) 0.2 mL PCR Tubes is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400170 Modular Heat Block, 64 x 0.2 mL PCR Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

SCILOGEX EZee Mini-Centrifuge, Blue Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 Strips Max. Speed 7 (more),000 RPM Max. Capacity 8 x 1.5/2.0ml micro-tubes Driving Motor DC Features - Available in two colors i.e., green, blue - Easy-to-use with dual start/stop function. - Maximum speed 7000rpm/2680xg - Supplied with an 8 place 1.5/2.0ml microtube rotor and 16 x PCR tube rotor & 0.2/0.5ml tube adapters. - Compact design - Whisper quiet operation, noise level ≤ 45dB - Ideal for quick spin downs of microtubes and PCR tubes - Simply close the lid for acceleration and open the lid for deceleration or use the on/off switch. - Accelerates and brakes in seconds. - Universal voltage - Rotors change without tools. EZee mini centrifuges are ideal for microfiltration and quick spin downs from the walls and caps of microcentrifuge tubes. The compact design takes up less than six inches of bench space. Easy open clear colored lids are available in four colors. Simply close the lid for acceleration and open the lid for deceleration, or alternatively use the on/off switch. Click Here to View Product Video INCLUDED: The SCILOGEX EZee Mini-Centrifuge, Blue Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 Strips includes: - 8 Place 1.5/2.0ml Microtube Rotor - 16 x PCR Tube Rotor - 0.2/0.5ml Tube Adapters - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark BSH5002-2B myBlock ll - digital dry bath with 2 Quick-Flip blocks (BSWCMB) for tubes (0.2  (more)to 2.0ml, PCR strips and PCR plates, 115VBenchmark’s myBlock series is a “next generation” product line that introduces several major advantages over traditional dry baths. They are the first digital dry baths to include advanced microprocessor controls, timed or continuous operation and a removable hinged lid. In addition, an optional external temperature feedback probe can be positioned directly inside a sample tube, providing real-time control and monitoring of actual sample temperature.The myBlock’s transparent lid helps to promote better uniformity and minimize temperature stratification in the block by maintaining a warm air jacket layer. It also helps to reduce energy consumption by minimizing heat loss to the environment. The hinged lid can be flipped open (to the rear), or easily removed (lifted off) to accommodate taller tubes. Both the single and dual block models can be ordered in a configuration that includes our unique Quick-Flip™ blocks (BSH5001-1B and BSH5002-2B). These universal blocks accept tubes from 0.5 to 2.0ml and, with just a quick flip to the other side, accomodate 0.2ml tubes, PCR strips or (in the dual block model only) a PCR plate. Other blocks are available for tubes up to 50ml. Click Here to View Product Video INCLUDED: The Benchmark BSH5002-2B myBlock ll - digital dry bath with 2 Quick-Flip blocks (BSWCMB) for tubes (0.2 to 2.0ml, PCR strips and PCR plates, 115V includes: - 2 x BSWCMB Quick-Flip Blocks - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris PR2121-N-1000 qMAX Probe One-Step RT-qPCR Kit, No Rox, 1000 Reactions qMAX Probe One Step Mu (more)ltiplex kits are specifically developed and optimized for efficient probe-based detection of multiple targets in a single reaction well. The Multiplex formulation is comprised of a 20x reverse transcriptase and 2x PCR Mix preparation ideally suited for complex RNA samples including low-copy number viral RNA commonly used in the clinical and research laboratory. INCLUDED: The Accuris PR2121-N-1000 qMAX Probe One-Step RT-qPCR Kit, No Rox, 1000 Reactions includes: - Accuris PR2121-N-1000 qMAX Probe One-Step RT-qPCR Kit - No Rox - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Molecular Devices Model: SpectraMax M2e Description: The SpectraMax® M2 and M2e system (more)s from Molecular Devices are multidetection microplate readers with dual monochromators, dual-mode cuvette ports and top and bottom reading capability (top reading only on the M2). Detection modalities include absorbance (UV-Vis Abs) and fluorescence intensity (FI). Endpoint, kinetic, spectrum and area-well scanning reading modes and the PathCheck® sensor enable homogeneous and heterogeneous microplate assays to be performed in a flexible system. SpectraMax M2 readers enable easy conversion and optimisation from very low throughput assays to medium to high throughput assays, faster, more accurate results and reagent savings. In addition, combined absorbance and fluorescence intensity assays can be performed with a single read command. Core features: - Multi-detection capability - Top and bottom read (M2e only) - Dual-mode cuvette connection - Two monochromators - PathCheck and well volume sensor - Validation of device and software - Robot compatible Technical data: Absorbance photometric performance   Wavelength selection: Monochromator tunable in 1 nm steps Wavelength range: 200-1000 nm Wavelength bandwidth: ≤ 4.0 nm Wavelength accuracy: ±2.0 nm Repeatability of the wavelength: ±0.2 nm Photometric range: 0-4.0 OD Photometric resolution: 0.001 OD Photometric accuracy (microplate): < ±0.006 OD ±1.0%, 0-2 OD Photometric accuracy (cuvette): < ±0.005 OR ±1.0%, 0-2 OD Photometric accuracy: < ±0.003 OD ±1.0%, 0-2 OD Flatness of the baseline: < 0.001 OD Stray light: < 0.05% at 230 nm Fluorescence photometric performance   Dual monochromators: step size of 1 nm EX wavelength range: 250-850 nm EM wavelength range: 360-850 nm Wavelength bandwidth (EX, EM): 9 nm Optimised top-read sensitivity: 5 pM (fluorescein) in 96 wells Top-read guaranteed* sensitivity: 15 pM (fluorescein) in 96 wells Time-resolved fluorescence (secondary mode)   EX wavelength range: 250-850 nm EM wavelength range: 360-850 nm Data acquisition: 50-1450 µsec. in 200 µsec. steps Guaranteed sensitivity: 7 pM Eu chelate Luminescence (secondary mode)  Wavelength range (M2): 360-850 nm Guaranteed sensitivity: 50 fM alkaline phosphatase General photometric performance  Plate formats: 6, 12, 24, 48, 96, 384 wells Light source: Xenon flash lamp (1 joule/flash) Detector: Photomultiplier tube (PMT) Reading time** 96 wells: 384 wells: Abs 18 sec, FI 15 sec Abs 49 sec, FI 45 sec Shaking time: 0 to 999 seconds Temperature control: Ambient temperature +4°C to 45°C Temperature uniformity: < 1°C at 37°C setpoint Temperature accuracy: ±1°C at 37°C setpoint General specifications   Power consumption: < 125 watts Power: 100-240 Vac, 3 A, 50/60 Hz Dimensions: 23x16x9 cm Weight: 35lbs Scope of delivery: - SpectraMax M2e - Operating instructions as PDF via e-mail The device is in absolute top condition and has been 100% tested for function.

Working temperature range: 20 to 120°C Temperature stability: ±0.02K Pump pressure max: 0.4 bar Pump (more) flow max: 17 L/min Volume: 12 to 18 L Dimensions (WxDxH): 331 x 536 x 349 mm Bath opening (WxD): 300 x 365 mm Bath height: 150 mm Large LCD display for actual and set values, setting and display resolution of 0.1°C Easy input of set value for temperature and Vario pump via three function keys Automatic safety and warning function in case of low liquid level in the bath Overtemperature protection with automatic cut-out (safety class III, FL for operation with flammable liquids) Audible error alarm Malfunction indicator with automatic diagnosis Calibration and adjustment option

LTE Scientific Unitemp Drying Cabinet This item was removed from a university lab where it was surpl (more)us to requirements. It is in good condition and powers on with the heater running and both bottom and top circulating fans operating. Specifications:- Capacity: 534 litres - Six heat settings, max temperature 65˚C - Four adjustable wire shelf racks - Toughened glass door The item was temperature tested (thermometer not included), and the following observations were made:- Maximum setting (6) only reached 47°C with the top circulating fan on. - When the top fan was turned off, the temperature climbed to 65.8°C and stabilised. Model: Unitemp Serial No.: K10183

Samples and applications - Preparation of spreadable creams and soluble powders (tea, coffee, milk)  (more)- Preparation of pharmaceutical ointments and creams - Suspensions/emulsions for infusion/injection - Preparation of soap, shampoo, and conditioner; preparation of cosmetic lotions - Water analysis - Preparation of pigments, inks, and paints - Preparation of liquid crystals for displays - Preparation of biodiesel TECHNICAL DATA - Rotor diameter: 15 mm - Stator diameter: 20 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 50 - 2,000 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 19.6 m/s - Ultimate fineness, emulsions: 1-7 µm - Ultimate fineness, suspensions: 5-40 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

Corepoint Scientific EF051WWW-0M -15C to -25C Hazardous Location Freezer Temperature Setpoint Range  (more)-15°C to -25°C Capacity 4 Cu. Ft. Defrost Method Manual Features - Offers 4 cubic feet of storage capacity, ideal for undercounter installation in space-constrained environments. - Meets NFPA and OSHA guidelines for Hazardous Location, Class 1, Division II, Groups C &amp; D, ensuring safe operation in environments with potential explosive conditions. - Features a microprocessor temperature controller with a digital temperature display, allowing precise control over temperatures ranging from -15°C to -25°C. - Utilizes R600a, a natural hydrocarbon refrigerant, enhancing energy efficiency and reducing environmental impact. - Built with high-density urethane foam insulation and finished with white powder-coated steel for durability and compliance with EPA standards. - Equipped with a solid swing door and keyed door lock to secure sensitive materials effectively. The Corepoint Scientific EF051WWW-0M Hazardous Location Freezer offers a compact and efficient solution for safely storing sensitive materials in environments that require stringent adherence to safety standards. With a storage capacity of 4 cu. ft., this freezer is ideal for small laboratories or areas where space is at a premium. It features a robust construction with a white powder-coated steel exterior and a cabinet that is foamed-in-place with EPA compliant high-density urethane foam, enhancing its insulation and energy efficiency.This unit is equipped with a single swing solid door that includes a keyed door lock for secure access. Two fixed shelves inside the freezer help optimize storage space and organization. The leveling legs allow for stable installation on uneven surfaces, ensuring that the unit operates correctly.Temperature management is controlled by a microprocessor temperature controller with a digital display, allowing for precise settings from -15°C to -25°C. The freezer also includes manual defrost capabilities, essential for maintaining peak performance and efficiency. Safety features include audible and visual high and low temperature alarms, along with remote alarm contacts, which provide added security and compliance with safety protocols in hazardous locations. Power cord is not included - final power connections at site must be hardwired to meet local codes. INCLUDED: The Corepoint Scientific EF051WWW-0M -15C to -25C Hazardous Location Freezer includes: - 2 Fixed Shelves - Leveling Legs - Key for Door Lock - Operator's Manual - 2 Year Manufacturer's Warranty