Benchmark BSH100-02 Block, 40 x 0.2ml tubes or 5 PCR strips of 8 tubes each

The Applied Biosystems 7500 Fast Real-Time PCR System offers maximum performance in the minimum time (more) for labs running a variety of applications, including High Resolution Melting (HRM) analysis. Fully optimized for Fast cycling, the 7500 Fast System delivers high-quality results in as little as 30 minutes. The 7500 Fast System enables more runs per day with the excellent performance equivalent to that offered by the 7500 System. The Applied Biosystems 7500 Fast System is the original Fast solution including validated Fast reagents and over 700,000 TaqMan Gene Expression Assays. Specially designed Fast block ensures thermal uniformity at top speeds TaqMan Fast Universal PCR Master Mix and Fast SYBR Green Master Mix enable-rapid results with excellent assay performance equivalent to that of standard real-time PCR Fast optical plates ensure excellent precision in 5 – 30 μL reaction volumes Fast ramp rates enable rapid results without compromising extension times or assay quality

This Agilent Stratagene Mx3005P Real-Time PCR System was removed from a university lab where it was  (more)surplus to requirements. The main unit is in reasonable used cosmetic condition but it does have some scrapes, scratches and marks from use. The unit powers up and both Green LED's light. You can also feel the well block heating up. The well block is 96 hole. The system includes:1 x Agilent Stratagene MX3005P. (various marks from use)1 x Dell E8400 PC with keyboard & mouse which we believe to be brand new.1 x iiyama monitor. (various marks from use) The PC has has a new HDD fitted and is running a fresh install of Windows 7. Also installed is a copy of Stratagene MxPro - Mx3005P v4.10 build 389. The software will control the Mx3005P unit. We have run a basic heat cycle with it and varified that the lamp will turn on & off. It has not been tested any further. The PC comes with a brand new sealed keyboard & mouse and a used iiyama monitor is also included. The system should include everything required to operate.

This Applied Biosystems 7500 Fast Real-Time PCR System with PC & Software was removed from a uni (more)versity lab where it was surplus to requirements. The unit powers up and has been connected to the PC. It has been inspected by a service engineer who has re-certified it. The PC is a Dell Optiplex PC with a monitor, keyboard & Mouse with Life Version 2.3 7500 software installed on it. The machine also has a fresh install of Windows 7. The 7500 has passed the following function tests:USBCCDFilter WheelShutterLampThermal CyclerAll tests passed. The lamp condition is described as 'good'. It has 209 hours usage and the current is 5.597amps. It is reported as being replaced 06/24/2020. The unit has not been calibrated as it requires an Applied Biosystems real-time PCR system spectral calibration kit

Benchmark H5100-02 96 Well PCR plate or 96 x 0.2ml Block for MultiTherm Touch The Benchmark H5100-02 (more) 96 Well PCR plate or 96 x 0.2ml Block for MultiTherm Touch is designed for use with the Benchmark H5100-HCT MultiTherm Touch Heating and Cooling Shaker. The H5100-02 is compatible with the H5100-HL Heated Lid. INCLUDED: The Benchmark H5100-02 96 Well PCR plate or 96 x 0.2ml Block for MultiTherm Touch includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

SCILOGEX EZee Mini-Centrifuge, Blue Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 Strips Max. Speed 7 (more),000 RPM Max. Capacity 8 x 1.5/2.0ml micro-tubes Driving Motor DC Features - Available in two colors i.e., green, blue - Easy-to-use with dual start/stop function. - Maximum speed 7000rpm/2680xg - Supplied with an 8 place 1.5/2.0ml microtube rotor and 16 x PCR tube rotor & 0.2/0.5ml tube adapters. - Compact design - Whisper quiet operation, noise level ≤ 45dB - Ideal for quick spin downs of microtubes and PCR tubes - Simply close the lid for acceleration and open the lid for deceleration or use the on/off switch. - Accelerates and brakes in seconds. - Universal voltage - Rotors change without tools. EZee mini centrifuges are ideal for microfiltration and quick spin downs from the walls and caps of microcentrifuge tubes. The compact design takes up less than six inches of bench space. Easy open clear colored lids are available in four colors. Simply close the lid for acceleration and open the lid for deceleration, or alternatively use the on/off switch. Click Here to View Product Video INCLUDED: The SCILOGEX EZee Mini-Centrifuge, Blue Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 Strips includes: - 8 Place 1.5/2.0ml Microtube Rotor - 16 x PCR Tube Rotor - 0.2/0.5ml Tube Adapters - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark B5200 SureAir PCR Workstation Air Velocity 0.2 m/s Filter 0.3 um 99.97% HEPA UV Light 8W U (more)VC Features - HEPA Filter and UV light reduce contamination - Highly compact, 22 x 16 in. footprint - Included cable access port allows use of centrifuges, vortexers, and other instruments - Included pipette holder and shelf provides storage for pipettes and tips - Provides ISO 5 level clean conditions - 2 Year Manufacturer's Warranty

ECO Silver Lauda - Cooling Thermostat LAUDA ECO with reliable technology and modern design for tempe (more)rature ranges from -50°C to 200°C depending of the models. Microprocessor management and integrated cooling system. Silver (monochromatic LCD graphic display), both equipped with mini USB interface. They are distinguished by their range of functions, ease of use and clarity of the display, allowing maximum comfort of use for the operator. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Refrigerated thermostats comes standard with tank lid, pump connections and are available with air and water cooling. A drain cock on the back of the device makes changing the liquid in the tank easy and safe.Thermostatic bath/circulator with latest microprocessor technology and integrated cooling system MAIN FEATURE • Monochrome grafic LCD display for simultaneous indication of actual and set value • User friendly menu navigation in plain language • Easy input via cursor and soft keys. Additional Tmax key for overtemperature protection • Fully electronic continuous controller with PID action • Safety class III for operation with flammable and non-flammable liquids. Overtemperature cut-out adjustable via menu • Vario pump with six adjustable performance levels • Easy control of the flow rate between internal and external circulation during operation without contact with the bath • USB interface as standard • Upgradeable with an interface module (analogue module, contact module, RS 232/485 module, Profibus, Ethernet-USB module) • Upgradeable with Pt 100/LiBus module for external control and remote control via Command console • Integrated programmer, 1 programme with max. 20 segments • Pump connectors with plastic nipples 13 mm as standard • Bath vessel made from stainless steel with drain valve • Condenser cooling Air • Utilizes natural refrigerants Graph of cooling performance of ECO Silver LAUDA cryostats. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Pump connection: Outflow and return with fittings 13 mm diameter (plastic) 2 - Bath cover 3 - Front grip recess 4 - Ventilation grill (both sides) 5 - Front panel (removable without tools) 6 - Four feet 1 - Rating label 2 - Control cable of cooling underpart (only with RE 1050 S) 3 - Rear grip recess 4 - Connecting lead between the control head and cooling underpart 5 - Bath draining tap 6 - Bath drain point 7 - Ventilation grill

F2 Mass Standard - knob weights with adjustment chamber. Nominal value - 10 kg.

Precision of WLC balances Fast, accurate and repeatable weight determination. Energy-efficient elect (more)ronics and display, combined with an internal rechargeable battery, are the perfect duo to allow you to work without access to mains power. Precision not just in the name When we designed this balance, we took care of the smallest details – both those you can’t see, hidden in the solid housing, and those you can touch. This balance is the result of a combination of our experience and true precision. The power of steel The use of stainless steel for the pan guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal power The internal rechargeable battery combined with the energy-saving display and electronics allow many hours of operation without mains power. Time counts The balance is equipped with a real-time clock that provides accurate time measurement in a way that is independent of external power supply. There is potential Printer, computer, flash drive or additional display – you can easily connect them thanks to the fact that the balance is equipped with interfaces: 2 x RS232, USB type A and USB type B. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Good ALIBI The ALIBI memory used in the terminal allows for safe storage of weighing records without the possibility of unauthorized interference. A single measurement remains in the ALIBI memory up to a preset limit number of days of storage, counting from the date it was taken. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Accuris P7700-20 NextPette Variable Volume Pipette, 2 to 20ul Inaccuracy ± 3 to 0.8% Imprecision ± 3 (more) to 0.8% Compatible Tip Size 200ul Features - Market leading accuracy & precision - One handed volume adjustment - Convenient volume lock - Easily visible, 4 digit display - Ergonomic, thumb shaped plunger button The NextPette development project started with feedback from a wide range of researchers and technicians. The Accuris engineering team then set their sites on creating an ultra-lightweight, and ergonomic pipettor without any sacrifice in terms of durability, accuracy and precision. The NextPette incorporates many significant features and advantages truly appreciated by today's research laboratories.The easily accessible volume adjustment system reduces the time and inconvenience associated with volume selection. The uniquely positioned volume dial is located above the pipette handle, allowing for easy one handed adjustment with the user's thumb. The volume display is located on the side of the pipettor that faces the user. Unlike traditional pipettors, the NextPette does not require a second hand to rotate the pipettor 180° to observe the display.The NextPette also features an innovative, asymmetrical designed plunger button that can be rotated to match the comfort preference of the user. This button is freely adjustable to rotate continuously between wide setting, resulting in the more traditional feel of a round, larger diameter plunger button, or to a more narrow (thumb shaped) contour preferred by the majority of researchers.The NextPette's materials and components were carefully selected to minimize weight and ensure durability and a long service life. Internal components include precision plungers made of stainless steel (1ul, 10ul, 5000, and 10,000µl models) or ceramic (20ul, 200ul, and 1000ul models) and all use durable PTFE seals. The pipettors have also been designed with service in mind. They are easy to disassemble, and seals are easy to replace. Silicone lubricant is included with each pipettor. Recalibration can be done in the lab - no tools are required and the instruction manual includes full details on how to properly check pipetting accuracy and how to recalibrate if necessary. The entire pipettor is autoclavable at 121°C and resistant to UV exposure. All pipettes are factory calibrated in accordance with ISO 8655 standards and include a factory calibration certificate. INCLUDED: The Accuris P7700-20 NextPette Variable Volume Pipette, 2 to 20ul includes: - Calibration Certificate - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW