Accuris PR2121-N-500 qMAX Probe One-Step RT-qPCR Kit, No Rox, 500 Reactions

Ohaus 30130874 4 x 8-Place PCR Strip Fixed Angle Rotor The Ohaus 30130874 4 x 8-Place PCR Strip Fixe (more)d Angle Rotor accommodates a capacity of up to 4 x 0.2 ml PCR8. This rotor is designed for use with Ohaus FC5515, and FC5515R series centrifuges and reaches speeds up to 15,000 RPM with a maximum RCF of 15,342 x g. INCLUDED: The Ohaus 30130874 4 x 8-Place PCR Strip Fixed Angle Rotor includes: - Ohaus 30130874 4 x 8-Place PCR Strip Fixed Angle Rotor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA DB 6.1 Individual PCR Tube Strip Dry Block (0.2 ml tubes))

Accuris PR2122-N-1000 qMAX Probe One-Step Multiplex RT-qPCR Kit, No Rox, 1000 Reactions Reactions qM (more)AX Probe One Step Multiplex kits are specifically developed and optimized for efficient probe-based detection of multiple targets in a single reaction well. The Multiplex formulation is comprised of a 20x reverse transcriptase and 2x PCR Mix preparation ideally suited for complex RNA samples including low-copy number viral RNA commonly used in the clinical and research laboratory. INCLUDED: The Accuris PR2122-N-1000 qMAX Probe One-Step Multiplex RT-qPCR Kit, No Rox, 1000 Reactions Reactions includes: - 10x1ml reaction mix, 10x100μl RTase - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

1 block of 96 samples.

The Bax system is genetics based screening method that quickly and accurately detects target bacteri (more)a in raw ingredients, finished food products, environmental and water samples for fast accurate results. Through the polymerase chain reaction (PCR), the Bax system provides “yes-no” answers without the need for confirmationor expert interpretation of results. Tableted reagents provide minimal hands-on time using standard laboratory techniques in addition to accuracy, long shelf life and consistency. The Bax system cycler/detector provides even more ease of use through automated amplification and detection. Just load your samples and walk away. Electronic results that are clear, reliable and easily store are available in about four hours. Automated cycling, detection and analysis High capacity load of 96 samples per batch Single platform and protocol for all organisms allows testing for multiple targets in the same batch Electronic record of data for easy storage, retrieval and printing Pre-packaged PCR tablets have build-in control and ingredients to overcome PCR inhibition Excellent inclusivity and exclusivity for all targets No confirmation required Clear and reproducible results, independent of operator technique Minimal hands-on time using standard laboratory techniques Results as quickly as the day of sampling Performance meets or exceeds gel-based Bax systems Including software

Yamato RE-202-A Rotary Evaporator (Main Unit Only), 115V Speed Range 5~315 rpm Evaporation Capacity (more) Up to 23 ml/min Operating Ambient Temp. Range 5~35°C Features - Rotate faster & slower (315 rpms – 5 rpms) than any other rotary evaporator on the market, so you can test new SOPs and develop better methods. - Easily manage your expensive samples with small flask sizes (from 100ml to 2L). - Program rotation direction changes, ramps, and other automations to get more done in the lab at once. - Easily analyze the residue left over after distillation. - Orient for left or right-handed operation based on your limited bench space. Standard rotary evaporator with slide jack mechanism for convenient height adjustment. Market leader in rotation speed range at 5~315 rpm. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. Standard equipped with condenser insulation kit to suppress condensation on the condenser’s surface. INCLUDED: The Yamato RE-202-A Rotary Evaporator (Main Unit Only), 115V includes: - AC adapter - Bath Guide - Rear Cover - Single-Sided Tape Fastener Roll - Double-Sided Tape Fastener Roll - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson MyPIPETMAN Select Multichannel P12x20, 2-20 uL PipetteFeatures - Designed to be ergonomic, sa (more)fe, and reliable while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 2 to 20 uL - 3 Year Manufacturer's Warranty

Digital block heater for two aluminum blocks provides precise temperature control in small vessels.  (more)Included PT-1000 temperature sensor allows temperature control directly in the sample vessel. The block heater is ideal for melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media tests, coagulation tests, blood-urea-nitrogen determinations and in situ hybridizations. Stepless adjustable temperature up to 120°C Timer: Countdown, adjustable from 1 min to 99h 59min Counter: Display of heating time Highly versatile with a large number of blocks Error code display Fixed safety circuit Acoustic signal at end of test Number of blocks: 2 Heat output: 250 W Heating temperature range: Ambient +5°C to 120°C Temperature display: yes Adjustment and display resolution: 1 K Connection for ext. temperature sensor: CT (DIN12878) PT 1000 variation;DIN EN 60751 Kl. A: ≤ ± (0.15 +0.002xITI) K Temperature stability within the blocks at 37°C: ±0.2°C Temperature stability within the blocks at 60°C: ±0.4°C Temperature Homogenity at 37°C: 0.2 K Temperature Homogenity at 60°C: 0.4 K Heatingrate / Heat up time with external sensor: 4.5 K/min Set-up plate material: Aluminium alloy Set-up plate dimensions: 96 x 152 mm Fixed safety circuit: 150°C Timer: yes Time setting range: 1 – 5999 min Dimensions (WxHxD): 151 x 73 x 304 mm Weight: 1.724 kg Blocks included: 1x DB 1.2: Used for Eppendorf microtubes (1.5 ml) Pore size: Ø 11.5 mm No. of holes: 20 Hole depth: 36.9 mm Dimensions (WxDxH): 95 x 76 x 51 mm 2x DB 5.1: Used for 12 mm vials Pore size: Ø 12.7 mm No. of holes: 20 Hole depth: 30.0 mm Dimensions (WxDxH): 95 x 76 x 51 mm 1x 13.9: Used for round bottom tubes (12/13 mm) Pore size: Ø 13.7 mm No. of holes: 16 Hole depth: 48.4 mm Dimensions (WxDxH): 95 x 74 x 51 mm