Accuris PR2121-L-500 qMAX Probe One-Step RT-qPCR Kit, Low Rox, 500 Reactions

Applied Biosystems 7500 FAST Real-Time PCR System w/ PC & Software Lab This system was removed  (more)from a university where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The PC runs Windows 7 and has the following software installed:Life Version 2.3 7500 Lamp Hours:409The lamp was replaced on 10/20/2020. The unit has not been calibrated, as it requires an Applied Biosystems real-time PCR system spectral calibration kit. Included with it are; 1 x Box of Microamp 96-well tray for Veriflex blocks. (factory sealed)1 x Kit, primer express V3.0.1 (factory sealed)1 x Box of EnduraPlate optical 96-well fast multicolour reaction plate with barcode (factory sealed)1 x. ASSY, OPTICAL TROUBLESHOOTING PLATE BLACK1x Pack of paper fluorescent green 3-1/16 inch x 4-5/8 inch (8pcs/pkt)1x Microamp Adhesive film applicator1 x 7500 Software pack (factory sealed)5 x Kettle Leads1x Type G Gbr Irl, Mlt, Mas, Sin1x Type F    EU, Rus2x type B   Usa, Mex, Can, Jpn1x type I    Aus, Arg, Chin, Nzl

Applied Biosystems 7900HT Real-Time PCR System with 96-well block and software. 6 systems available  (more)at short notice, 84 other units with a delivery time from 4 weeks. Go for it! How does the test to detect SARS-CoV-2 work? SARS-CoV-2 is detected by smears from the mouth, nose, or throat. The smear may contain genetic material from the virus. The qualitative test is based on the principle of real-time PCR, which is a method that specifically recognizes viral RNA and amplifies it so that it is detectable by fluorescence signals.

Accuris PR2120-N-25BLK qMAX Green One-Step RT-qPCR Kit, No ROX, 2500 Reactions (1x25ml, 2x1.25ml) Th (more)e qMAX Green One-Step RT-qPCR Kit is aready-to-use 2x master mix and companionthermostable reverse transcriptase for usein highly sensitive real-time RT-PCR assaysin which intercalating dye-based detectionprovides the option of a post amplificationmelt profile. The mix is powered by HSTaq DNA Polymerase, qMAX MMLV derivedReverse Transcriptase, and an optimized bufferchemistry for robust first-strand cDNA synthesisand real-time PCR in a single tube. The mixdelivers earlier quantification cycle values(Ct) and broad range detection for increasedsensitivity, speed, reliability and reproducibility.The qMAX Green One-Step RT-qPCR Kit canbe used to quantify a specific target RNA fromeither total RNA or mRNA while reducing thenumber of pipetting steps and time to result. All Accuris One-Step Kits are compatible with standard and fast cycling protocols and provide increased sensitivity, speed and reproducibility for a broad range of samples and targets. The polymerase mix is available with different levels of ROX reference dye for compatibility with all qPCR instruments. INCLUDED: The Accuris PR2120-N-50BLK qMAX Green One-Step RT-qPCR Kit, No ROX, 5000 Reactions (1x50ml, 4x1.25ml) includes: - Accuris SYBR Green One-Step RT-qPCR Kit, No ROX, 2500 reactions - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris PR2000-H-1000 qMAX Green, with Blue Tracking Dye, High Rox qPCR Mix, 1000 Reactions Supplied (more) as a ready-to-use 2X master mix, qMax Green has been engineered for high sensitivity, fact cycling and excellent reproducibility. Accuris Hot Start Polymerase provides accurate PCR of a variety of templates including low copy number and difficult sequences, while the proprietary qMax Green intercalating dye exhibits higher fluorescence and lower PCR inhibition than other popular green dyes.These two components are supported by a specially formulated buffer with an exacting combination of salts, PCR enhancers, stabilizers and pH that results in earlier Ct values and a high specificity across a broad dynamic range. An inert blue dye is also mixed into the qMAX Green to allow easy visualization during pipetting. INCLUDED: The Accuris PR1001-HS-1000 Hot Start Taq Master Mix, 2X Conc., 1000 Reactions includes: - Accuris PR2000-H-1000 qMAX Green - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This listing is for a Analytical weight set. The unit is in full working condition and is ready for (more) immidate realese. Analytical Weight Set is a set of weights used in laboratory balances and scales for precise measurements

Proline heating thermostat with tank Proline clear-view LAUDA thermostats have been designed for dir (more)ect observation of objects. They are ideal for use with LAUDA Scientific PVS or iVisc automatic viscometer, as the necessary temperature stability for precise viscosity determination is ensured over the entire temperature range. In addition, the two-chamber principle always guarantees a constant liquid level in the measuring chamber, regardless of the volume and temperature of the medium. PVL models with five layers of insulating glass are suitable for low temperature measurements down to -40° or -60°C when a low temperature chiller or thermostat is connected. These thermostats are available with two different control units. The Master version is designed for all applications where the parameters are not changed very often. The removable Command operating unit (PV C models) incorporates a graphic LCD screen for high operating convenience and a programmer. Notable features - LAUDA Vario Flex pump (pressure pump) with eight selectable power levels - Cooling coil fitted as standard with connection for additional cooler Accessories included Fittings for pump connection, cooling coil Specific features of the Proline PV 24 C model - Tank volume min. 19 L - Tank volume max. 24 L - Tank opening 405 x 135 mm - Bowl depth 320 mm - Usable depth 285 mm - Upper height of the tank 390 mm - State-of-the-art Command control panel, removable, for remote use; LCD display with the most advanced feature set in the LAUDA range - Pump pressure mx. 1.1 bar - Water-cooled temperature range from 20°C to 230°C - Operating temperature range from -60°C to 100°C - Pump connectors M16 x 1 - Fitting 13 Ø

High Capacity HRP Platform Wherever high readability and precision are important. Wherever good repe (more)atability in harsh industrial conditions matters. High Capacity HRP Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others High Capacity HRP Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Unbreakable High Capacity HRP Platforms feature a modern electromagnetic mechanism design in a sealed steel housing and overload protection. The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. High Capacity HRP Platforms are distinguished by a high degree of protection IP 67. For an additional charge we will make HRP platforms in Ex version, but in order for the device to work in explosive areas, you need to supply the PUE HX5.EX terminal. Use the potential High Capacity HRP Platforms work with one of two weighing terminals: PUE 7.1 or PUE HY10. The terminals’ software enables you to archive your work results, ensures data safety, and allows the platforms to work with powerbanks from our offer. In turn, you will select appropriate antivibration tables for the platforms, and thus increase the readability of your measurements.

Edwards T-Station 85H Wet Turbo Station - NW40 200-240V Ultimate Pressure <5 x 10-8 mbar Inlet Co (more)nnection NW40 Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application nEXT T-StationThe Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All our nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of our active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 85Our T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines an nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1.INCLUDED: The Edwards T-Station 85H Dry Turbo Station - NW40 200-240V includes: - Power Cord - One Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW