Tecan Infinite M200 Pro Multi Mode Microplate Reader Fluorescence Luminescence

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Tecan Genios Pro Multifunction Microplate Reader: The Tecan Genios Pro is a fully automatic, compute (more)r controlled Fluorescence. Luminescence and Absorbance instrument for measuring samples in a microplate. The instrument fulfills the requirements for numerous fluorescence, absorbance and luminescence applications in research and routine investigations. The filters are arranged in filter slides; four excitation filters and four emission filters respectively can be installed in the slides. Handles 6, 24, 96 and 384 well plates. Spectral range 360-700nm for fluorescence. 230-900nm absorbance spectral range. Sensitivity ≤1.5 picogram fluorescein on each well or ≤4 fmol well. The emission signal is measured by a highly sensitive PMT. Different detection techniques with one instrument change of measurement directions (top / bottom) by PC software. Thermal incubation at +5º C to + 40º C. Dual optical channels allow measurements from above or below the plate by mouse-click. Light to and from the samples is focused by a lens and high quality filters are easily accessible from the front of the instrument. Each filter slide can hold up to four filters. Orbital shaking and temperature control are standard. Plate formats: 6 to 384 well plates Absorbance Range: 230-999nm Temperature control: Ambient + 5 °C to 42 °C Shaking: Linear or orbital, 3 velocities Fluorescence Intensity Wavelength range: Excitation: 230 – 850 nm, emission: 280 – 850 nm Bandwidth: Adjustable from 2.5 nm – 10 nm below 280 nm, 5 nm – 20 nm above 280 nm Wavelength accuracy: ± 1 nm Wavelength precision: ± 1 nm Sensitivity (top reading – 384 well plate): 0.2 fmol/well Sensitivity (bottom reading – 384 well plate): 0.6 fmol/well Time Resolved Fluorescence Sensitivity (384 well plate): 60 amol/well Precision (384 well plate): 3 mP standard deviation Fluorescence Polarization Wavelength Range: 275-750nm Absorbance (96 well) Wavelength range: 230 – 999 nm Wavelength accuracy (492nm): ±/- 1% and ±/- 0.010 OD OD Wavelength precision (492nm): ±/- 10,5% and ±/- 0.005 OD OD Measurement range: 0 – 4 OD Glow Luminescence Type: Chemi or Bioluminescence Wavelength readings: 400-700nm

This Turner BioSystems Modulus II Microplate Multimode Reader was removed from a university lab wher (more)e it was surplus to requirements. Included are; 1 x Turner BioSystems Modulus II Microplate Multimode ReaderModel - 9300-011 1 x Injector SystemModel - 9300-062 Fluorescence Optical Kit with:EX 365EX 525EX 490EX 625 It comes with a power supply & a pump module cable. The item powers on and is in good, used cosmetic condition. The absorbance module is not included.

Epsilon 3XLE is a benchtop energy dispersive X-ray fluorescence (EDXRF) spectrometer that is used fo (more)r elemental analysis from carbon (C) to americium (Am) in areas from R&D through to process control. Easy to operate, reliable and highly flexible, it is ideally suited to a broad range of industries and applications. The instrument is powered by the latest advances in excitation and detection technology, delivering excellent analytical performance. The SDDUltra silicon drift detector fitted in Epsilon 3XLE enables ultra light element analysis of even carbon, nitrogen and oxygen. Excluding software

Brand: Liebherr Suitable for drawer system: Included Temperature: -20/30°C Type: Freezer Freezer app (more)lication: Explosion proof (ATEX114) Volume: 310 liters Cooling: Static Transit: Yes Min. Temperature: -30 Max. Temperature: -9

F2 Mass Standard - carrier weights. Nominal value - 500 g.

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module’s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).

Scilogex MicroPette Plus Pipettor, Starter Kit-1. 0.5-10ul, 2-20ul, 20-200ul, 100-1000ul & Linea (more)r Stand The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function.CalibrationAll SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C.Product Features - Lightweight and ergonomic design - Fully autoclavable - Clear digital display - Staggered tip ejector for easy tip ejection - Head rotates 360° for user comfort. - Easy to calibrate with tool supplied. - Used with 'universal' pipette tips. - Dispensing head rotates for effortless pipetting convenience. - Individual piston and tip cone assembly allow for easy repair and maintenance - Compound material-made tip cone secures high sealing performance - Compatible with most universal tip brands INCLUDED: The Scilogex MicroPette Plus Pipettor, Starter Kit-1. 0.5-10ul, 2-20ul, 20-200ul, 100-1000ul & Linear Stand includes: - Two Year Manufacturer's Warranty