Molecular Devices SpectraMax M2 Multi-Mode Microplate Reader ABS FL TRF LUM

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Bio-Rad PR3100. Compact absorbance reader for 96-well microplates, includes filters 405, 450, 492, 5 (more)50, 620 nm, color touch screen, computer embedded with Magellan CE software. User manual.

TDT Tucker Davis Technologies Audio Processing System This system was removed from a university lab  (more)where it was surplus to requirements. All units power on but have not been tested further. The system includes a number of cables. Modules (Front, Top to Bottom):System ID 3035- MA3 Stereo Microphone Amp - RP2.1 Enhanced Real Time Processor - PA5 Programmable Attenuator - SM5 Signal Mixer System ID 2901- MA3 Stereo Microphone Amp - RP2.1 Enhanced Real Time Processor - PA5 Programmable Attenuator - SM5 Signal Mixer Back Units:- Daxten Scout Combo - Parasound Zamp v.3 Zone Amplifier All items are in good cosmetic condition.

UVP Visi-Blue Transilluminator Model Type VB-26 Lab This item was removed from a university lab wher (more)e it was surplus to requirement. It is in good cosmetic condition and in good working order. Specifications; - Model: VB-26 - S/N: J116754

Rigaku CrystalMation Desktop Minstrel UV & Gallery 160 Plate Hotel System Lab This system was re (more)moved from a university as surplus equipment. The unit appears to be missing several components, including COM 3, COM 4, and USB ports, with no connections available. Additionally, the desktop unit has unconnected COM 1, FireWire camera, and USB LED light ports. The previous user also reported a software issue, noting that it is no longer supported by Rigaku. As a result, this system is listed as Spares/Repair. This system comprises the following: Rigaku Desktop Minstrel UVSN: 607 Rigaku Gallery 160 Plate HotelSN: 612 Racks:-15 x Sized H65.5 x W10 x L14cm3 x Sized H65.5 x W12 x L14cm Also includes the following cables: COM 1COM 3COM 4Camera (Firewire)Status Light (USB)LED Light (USB)

The LC-NMR-MS Interface is designed to sit between an HPLC system, an NMR spectroscopy probehead and (more) an MS unit. It would normally be mounted on top of the MS table immediately in front of the MS input connector. The BNMI-HP consists of 3 medium pressure (> 60Bar) syringe pumps, a 1:20 splitter, an 8-Port valve, 3 mixing chambers (T-Pieces) and associated control and interface electronics. The flow of the HPLC separations to the MS unit can be modified by pumping additional solvent from the syringe pumps. This improves the MS peak detection and shortens the time needed for the split separation to reach the MS. Separations can also be stored as a result of an MS peak detection as well as through UV absorption peak detection. The splitter splits the fluid flow from the HPLC in a 1:20 ratio. i.e. ca. 5% of the fluid is directed to the MS and the remainder to either the NMR probehead for immediate analysis or to the BPSU36 storage cassette for storage and later analysis.  The fluid directed to the MS is mixed in the mixing chamber (T-Piece) with the solvent pumped from the syringe pumps. The two left hand syringe pumps pump alternatively to guarantee a constant ’makeup’ flow. The 3rd pump at the right hand side is used to pump a calibration fluid into the flow path to allow the MS to be calibrated (or simply synchronized) at the start and end of each measurement cycle. The 8-Port valve is used to direct the fluid flow. Control of the BNMI Unit is performed using the HyStar program via an ethernet interface. Commands received from HyStar are interpreted in the BNMI Control Board. The control board then sets up the BNMI unit accordingly e.g.: Starts the pumps, changes the flow rate, turns the 8-Port valve. The splitter has a fixed mechanical function and cannot be controlled or adjusted. It simply accepts a fluid flow and splits it into 2 paths in a 1:20 ratio. However, other split ratios are available (for example 1:100 may be preferred if you have very high sample concentrations).

LARGE BOXES FOR THE TRANSPORT OF BLOOD PRODUCTS, TEST TUBES AND DRUGS Easily accessible features - T (more)he special transport containers of B Medical Systems are made of polyethylene, by rotational molding and have an extraordinarily robust, almost indestructible casing, as demonstrated by numerous drop tests - Extremely light. - Corrosion-resistant material for easier and safer handling of the instrument - Structure without corners and joints, which allows easy and thorough cleaning with conventional disinfectants - The clips can be sealed or padlocked to prevent unauthorized opening during transport - The polyurethane foam injected into the double walls of these transport containers is CFC and HCFC free, ensuring excellent insulation and protection even in long transport times and hot climates Storage capacity (gross volume of bags): 26 (450ml) / 40 (270ml) Cooling system: Passive External / internal material: polyethylene Inner container material: Polystyrene COLD LIFE (duration of passive refrigeration) at 32°C outside: up to 109 h at 43°C outside: up to 74 h Compliant with ADR, RID, IMDG, ICAO-TI, IATA-DGR, Class IIa medical device according to MDD 93/42 / EEC

Four sensors platform scale No matter where you place the load on the platform, the result will alwa (more)ys be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. Conveniently, without ramps You can use the scale as a pit – this allows the load to pass freely through the platform without application of ramps. If you need a dual-range scale, we can make one for you at an extra cost.